Structure and conductivity of yttria and scandia‐doped zirconia crystals grown by skull melting

In this paper a detailed study of the (ZrO₂)_1‐x(Y₂O₃)_x (x=0.025–0.15), (ZrO₂)_1‐x(Sc₂O₃)_x (x = 0.06 – 0.11) and (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y (x=0.07 – 0.11; y=0.01 – 0.04) solid solution crystals grown by skull melting technique is presented. The structure, phase composition, and ion conductivity of the obtained crystals were investigated by X‐ray diffraction, transmission electron microscopy, Raman scattering spectroscopy, and impedance spectroscopy. Maximum conductivity as (ZrO₂)_1‐x(Y₂O₃)_x and (ZrO₂)_1‐x(Sc₂O₃)_x solid solution crystals is observed for the compositions containing 10 mol% stabilizing oxide, and the conductivity of 10ScSZ is ~3 times higher than for 10YSZ. Experiments on crystal growth (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y solid solutions showed that uniform, transparent crystals 7Sc3YSZ, 7Sc4YSZ, 8Sc2YSZ, 8Sc3YSZ, 9Sc2YSZ, 9Sc3YSZ, 10Sc1YSZ, and 10Sc2YSZ are single phase crystal containing t″ phase. It is established that a necessary condition of melt growth of (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y single‐phase crystals is the total concentration of the stabilizing oxides from 10 to 12 mol%. The addition of Y₂O₃ affects the (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y solid solution conductivity different ways and depends on the Sc₂O₃ content in the starting composition. The effects of structure, phase composition, concentration, and type of stabilizing oxides on the electrical characteristics of obtained crystals are discussed.     

Melting behavior,crystallization kinetics and morphology of random copolyesters of poly(2‐hydroxyethoxybenzoate) with ε‐caprolactone

The melting behavior after isothermal crystallization and the crystallization kinetics of random poly(2‐hydroxyethoxybenzoate/ε‐caprolactone) copolymers rich in 2hydroxyethoxybenzoate units were investigated by means of differential scanning calorimetry and hot‐stage optical microscopy. The observed multiple endotherms, which are commonly displayed by polyesters, were found to be influenced both by crystallization temperature and composition. By applying the Hoffman‐Weeks method to the melting temperatures of isothermally crystallized samples, the equilibrium melting temperatures of the copolymers were obtained. Furthermore, isothemal crystallization kinetics was analyzed according to the Avrami treatment. Values of the exponent n close to 3 were obtained, independently of crystallization temperature and composition, in agreement with a crystallization process originating from predeterminated nuclei and characterized by three‐dimensional spherulitic growth. Space‐filling banded spherulites were observed by hot‐stage optical polarizing microscopy at all the crystallization temperatures explored, the band spacing being affected by both crystallization temperature and composition. As expected, the introduction of ε‐caprolactone comonomeric units in the polymer chain of PHEBA was found to decrease its crystallization rate.     

β-Cyclodextrin Inclusion Complex to Improve Physicochemical Properties of Pipemidic Acid: Characterization and Bioactivity Evaluation

The aptitude of cyclodextrins (CDs) to form host-guest complexes has prompted an increase in the development of new drug formulations. In this study, the inclusion complexes of pipemidic acid (HPPA), a therapeutic agent for urinary tract infections, with native β-CD were prepared in solid state by kneading method and confirmed by FT-IR and ¹H NMR. The inclusion complex formation was also characterized in aqueous solution at different pH via UV-Vis titration and phase solubility studies obtaining the stability constant. The 1:1 stoichiometry was established by a Job plot and the inclusion mechanism was clarified using docking experiments. Finally, the antibacterial activity of HPPA and its inclusion complex was tested on P. aeruginosa, E. coli and S. aureus to determine the respective EC_50s and EC_90s. The results showed that the antibacterial activity of HPPA:β-CD against E. coli and S. aureus is higher than that of HPPA. Furthermore, HPPA and HPPA:β-CD, tested on human hepatoblastoma HepG2 and MCF-7 cell lines by MTT assay, exhibited, for the first time, antitumor activities, and the complex revealed a higher activity than that of HPPA. The use of β-CD allows an increase in the aqueous solubility of the drug, its bioavailability and then its bioactivity.     

Plasmonic bandgap in random media

We present a dispersion theory of the surface plasmon polaritons (SPP) in random metal-dielectric nanocomposite (MDN) consisting of bulk metal embedded with dielectric inclusions. We demonstrate that embedding of dielectric nanoparticles in metal results in the formation of the plasmonic bandgap due to strong coupling of the SPP at the metal-vacuum interface and surface plasmons localized at the surface of nanoinclusions. Our results show that MDN can replace metals in various plasmonic devices, which properties can be tuned in a wide spectral range. Being compatible with waveguides and other photonic structures, MDN offers high flexibility in the plasmonic system design.     

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

Microwaves at 2.45 GHz have been applied to ignite the combustion synthesis of compacted Ti–Si–C powders mixtures, having 1:1:1 atomic ratio, in order to join SiC-based components. A mixture of different refractory phases such as TiC and TiSi₂ were obtained. Depending on the synthesis conditions, no residual silicon in the joint was detected, suggesting the suitability of the here proposed experimental joining approach for nuclear plants and high temperature applications. A simplified model was developed with the aim of obtaining a deeper understanding of the here proposed rapid, almost pressure-less and localized heating joining method. Experimental and numerical simulation results demonstrate that joining of SiC can be rapidly obtained with minimization of heat affected zones in the SiC substrates. Maximum apparent shear strength values of the joints ranged from 9.9 to 45.1 MPa, depending on the process conditions.     

Nucleation behavior of blended high‐melting fractions of milk fat as affected by emulsifiers

The effect of highly hydrophobic emulsifiers, the palmitic sucrose ester P‐170 (hydrophilic/lipophilic balance (HLB) = 1.0), the stearic sucrose ester S‐170 (HLB = 1.0), the polyglycerol ester decaglycerol decastearate DAS 7S (HLB = 3.7) and the polyglycerol ester decaglycerol dodecabehenate DDB 750 (HLB = 2.6), on the nucleation of a high melting point milk fat fraction (HMF) and its blends with sunflower oil (SFO) was investigated by polarized laser light turbidimetry, X‐ray diffractometry and polarized light microscopy (PLM). Addition of polyglycerol esters accelerated nucleation, giving shorter induction times for the same supercooling. On the contrary, sucrose esters inhibited nucleation since induction times were elongated in all conditions selected. Addition of emulsifiers modified the polymorphic behavior in the blends with SFO. The β' form was promoted especially with the addition of S‐170. DAS 7S and DDB 750 promoted crystallization. PLM images showed many small crystals that did not appear in HMF images. Addition of P‐170 and S‐170 delayed nucleation and inhibited crystal growth. Crystals were notoriously smaller than the ones that appeared in HMF images. The Fisher–Turnbull model was used to calculate activation free energies of nucleation. In all cases, sucrose esters elevated the energy barrier for nucleation. Polyglycerol esters, however, if they had an effect on the energy barrier, lowered the values.     

Adipose Stromal/Stem Cell-Derived Extracellular Vesicles: Potential Next-Generation Anti-Obesity Agents

Over the last decade, several compounds have been identified for the treatment of obesity. However, due to the complexity of the disease, many pharmacological interventions have raised concerns about their efficacy and safety. Therefore, it is important to discover new factors involved in the induction/progression of obesity. Adipose stromal/stem cells (ASCs), which are mostly isolated from subcutaneous adipose tissue, are the primary cells contributing to the expansion of fat mass. Like other cells, ASCs release nanoparticles known as extracellular vesicles (EVs), which are being actively studied for their potential applications in a variety of diseases. Here, we focused on the importance of the contribution of ASC-derived EVs in the regulation of metabolic processes. In addition, we outlined the advantages/disadvantages of the use of EVs as potential next-generation anti-obesity agents.     

CD8+ T Cell Senescence: Lights and Shadows in Viral Infections,Autoimmune Disorders and Cancer

CD8⁺ T lymphocytes are a heterogeneous class of cells that play a crucial role in the adaptive immune response against pathogens and cancer. During their lifetime, they acquire cytotoxic functions to ensure the clearance of infected or transformed cells and, in addition, they turn into memory lymphocytes, thus providing a long-term protection. During ageing, the thymic involution causes a reduction of circulating T cells and an enrichment of memory cells, partially explaining the lowering of the response towards novel antigens with implications in vaccine efficacy. Moreover, the persistent stimulation by several antigens throughout life favors the switching of CD8⁺ T cells towards a senescent phenotype contributing to a low-grade inflammation that is a major component of several ageing-related diseases. In genetically predisposed young people, an immunological stress caused by viral infections (e.g., HIV, CMV, SARS-CoV-2), autoimmune disorders or tumor microenvironment (TME) could mimic the ageing status with the consequent acceleration of T cell senescence. This, in turn, exacerbates the inflamed conditions with dramatic effects on the clinical progression of the disease. A better characterization of the phenotype as well as the functions of senescent CD8⁺ T cells can be pivotal to prevent age-related diseases, to improve vaccine strategies and, possibly, immunotherapies in autoimmune diseases and cancer.     

Gelcasting of dense and porous ceramics by using a natural gelatine

An improved gel-casting procedure was successfully exploited to produce porous ceramic bodies having controlled porosity features in terms of mean pore size, total pore volume as well as pore geometry. The gel-casting process in which a natural gelatine for food industry is used as gelling agent was firstly set-up to prepare dense alumina and zirconia components. Then, commercial PE spheres, sieved to select proper dimensional ranges, were added to the starting slurries as pore-forming agent. Both alumina and zirconia porous bodies were then produced, having a porosity ranging between 40 and 50 vol%. The fired components were characterised by spherical pores surrounded by highly dense ceramic walls and struts, having a homogeneous and fine microstructure. Their mean pore size was directly dependent on the sieved fraction of the starting PE spheres selected as pore-forming phase.     

Direct <Emphasis Type="SmallCaps">d</Emphasis>-Glucose Oxidation over Noble Metal Nanoparticles Introduced on Polymer and Inorganic Supports

In the present work, nanocatalysts prepared on inorganic supports (zeolites) were investigated in d-glucose oxidation and compared to systems supported on polymer (hypercrosslinked polystyrene (HPS)) previously described. Catalytic activities and selectivities were measured under various reaction conditions. The selectivity of d-glucose oxidation and activity of both Pd-containing zeolites and HPS-Ru were similar (99.7% and TOF 0.013–0.014 mol/(mol Me s)). Physicochemical analysis X-ray photoelectron spectroscopy, liquid nitrogen physisorption, diffuse reflectance infrared Fourier transform spectroscopy of adsorbed CO for metal sites evaluation, CD₃CN for acid sites evaluation showed that Pd species were in oxidic form, while Ru species were in oxidic and reduced form. The catalytic activity decreased when acidic sites were present in Pd-containing zeolites.