Structure and conductivity of yttria and scandia‐doped zirconia crystals grown by skull melting

In this paper a detailed study of the (ZrO₂)_1‐x(Y₂O₃)_x (x=0.025–0.15), (ZrO₂)_1‐x(Sc₂O₃)_x (x = 0.06 – 0.11) and (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y (x=0.07 – 0.11; y=0.01 – 0.04) solid solution crystals grown by skull melting technique is presented. The structure, phase composition, and ion conductivity of the obtained crystals were investigated by X‐ray diffraction, transmission electron microscopy, Raman scattering spectroscopy, and impedance spectroscopy. Maximum conductivity as (ZrO₂)_1‐x(Y₂O₃)_x and (ZrO₂)_1‐x(Sc₂O₃)_x solid solution crystals is observed for the compositions containing 10 mol% stabilizing oxide, and the conductivity of 10ScSZ is ~3 times higher than for 10YSZ. Experiments on crystal growth (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y solid solutions showed that uniform, transparent crystals 7Sc3YSZ, 7Sc4YSZ, 8Sc2YSZ, 8Sc3YSZ, 9Sc2YSZ, 9Sc3YSZ, 10Sc1YSZ, and 10Sc2YSZ are single phase crystal containing t″ phase. It is established that a necessary condition of melt growth of (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y single‐phase crystals is the total concentration of the stabilizing oxides from 10 to 12 mol%. The addition of Y₂O₃ affects the (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y solid solution conductivity different ways and depends on the Sc₂O₃ content in the starting composition. The effects of structure, phase composition, concentration, and type of stabilizing oxides on the electrical characteristics of obtained crystals are discussed.     

Design of a Cost‐Reduced Flexible Plant for Supercritical Fluid‐Assisted Applications

A novel batch plant for supercritical CO₂ applications is proposed which is not equipped with expensive components, such as high‐pressure pumps, making it particularly suitable for bench‐scale use. For the first time, the use of a hanging scale is suggested to weigh the amount of CO₂ required for the experiment and the use of the thermodynamics to reach the working conditions. The rig is able to cover different applications, e.g., aerogel drying, impregnation, and extraction, showing high flexibility. An approximate cost analysis has been performed considering as a reference a 150‐mL vessel. It has been calculated that both the setup and running costs are considerably lower than the common batch and semicontinuous rigs.     

Comparative study of surface properties of Mg-substituted hydroxyapatite bioceramic microspheres

Mg-substituted hydroxyapatite (HAp) bioceramic microspheres were prepared by spray drying and subsequent processing at 1173, 1273 and 1373 K. Influence of various Mg substitution levels (up to 0.84 ± 0.10 wt%) on physicochemical properties of the HAp bioceramic microspheres was evaluated. Obtained results were used for the elucidation of the compositional and structural characteristics of the microspheres in conjunction with adsorption of protein, namely, bovine serum albumin (BSA). The primary difference among the microspheres processed at various temperature was the presence or absence of the micropores (<2 nm in diameter) and mesopores (between 2 and 50 nm). Presence of the micro- and mesopores resulted in higher specific surface area (SSA), enhanced solubility, i.e., ion release, and, accordingly, increase in the amount of BSA adsorbed on the microspheres. Furthermore, the BSA adsorption capacity of the microspheres decreased with increasing Mg content despite of higher SSA.     

Manipulation of domain wall dynamics in amorphous microwires through the magnetoelastic anisotropy

We studied the effect of magnetoelastic anisotropy on domain wall (DW) dynamics and remagnetization process of magnetically bistable Fe-Co-rich microwires with metallic nucleus diameters (from 1.4 to 22 μm). We manipulated the magnetoelastic anisotropy applying the tensile stresses and changing the magnetostriction constant and strength of the internal stresses. Microwires of the same composition of metallic nucleus but with different geometries exhibit different magnetic field dependence of DW velocity with different slopes. Application of stresses resulted in decrease of the DW velocity, v, and DW mobility, S. Quite fast DW propagation (v until 2,500 m/s at H about 30 A/m) has been observed in low magnetostrictive magnetically bistable Co₅₆Fe₈Ni₁₀Si₁₀B₁₆ microwires. Consequently, we observed certain correlation between the magnetoelastic energy and DW dynamics in microwires: decreasing the magnetoelastic energy, K_me, DW velocity increases.     

Cover Image,Volume 66, Issue 3

The cover image, by Katia Sparnacci et al., is based on the Research Article High temperature surface neutralization process with random copolymers for block copolymer self‐assembly, DOI: 10.1002/pi.5285 .

     

Investigation of the changes in physical properties of PES/PVC fabrics after aging

The aim of this work was to investigate the physical and mechanical performance of architectural polyester (PES)–poly(vinyl chloride) (PVC) membranes exposed to different artificial aging conditions. Two commercially available architectural membranes were chosen as research objects. The durability of the PES/PVC fabrics was evaluated by the loss in mechanical performance, scanning electron microscopy, and X-ray diffraction analysis in order to understand the effect of the degradation agents on the surface of the membranes. The mechanical performance of the PES/PVC membranes was unchanged. Scanning electron microscopy images of the tested materials showed initial cracks after aging. The X-ray fluorescence analysis showed that at the time of aging, the amount of Cl and Si decreased slightly, while Ti decreased by half, and Ca by volume increased twice. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47523.     

Nano-to-macroporous TiO2 (anatase) by cold sintering process

Cold Sintering Process (CSP) was applied on commercial nanopowders to produce nanostructured TiO₂ anatase with nano-to-macro porosity. Nanoporous TiO₂ based materials were obtained by applying CSP at 150 °C and pressures up to 500 MPa on three TiO₂ nanopowders with different specific surface area (s.s.a. = 50, 90 and 370 m²/g), using water as transient aqueous environment. Although TiO₂ is insoluble in water, a density of 68% and s.s.a. = 117 m²/g were achieved from the powder with the highest specific surface area. A post annealing process at 500 °C increased the density up to 73% with a s.s.a. = 59 m²/g, and the crystallites dimensions passed from 110 Å in the powder to 130 Å in CSP material and 172 Å after post annealing. Finally, macroporosity was produced by using thermoplastic polymer beads as sacrificial templates within TiO₂ nanopowder during CSP, followed by a debonding at 500 °C.     

Direct <Emphasis Type="SmallCaps">d</Emphasis>-Glucose Oxidation over Noble Metal Nanoparticles Introduced on Polymer and Inorganic Supports

In the present work, nanocatalysts prepared on inorganic supports (zeolites) were investigated in d-glucose oxidation and compared to systems supported on polymer (hypercrosslinked polystyrene (HPS)) previously described. Catalytic activities and selectivities were measured under various reaction conditions. The selectivity of d-glucose oxidation and activity of both Pd-containing zeolites and HPS-Ru were similar (99.7% and TOF 0.013–0.014 mol/(mol Me s)). Physicochemical analysis X-ray photoelectron spectroscopy, liquid nitrogen physisorption, diffuse reflectance infrared Fourier transform spectroscopy of adsorbed CO for metal sites evaluation, CD₃CN for acid sites evaluation showed that Pd species were in oxidic form, while Ru species were in oxidic and reduced form. The catalytic activity decreased when acidic sites were present in Pd-containing zeolites.     

Gelcasting of dense and porous ceramics by using a natural gelatine

An improved gel-casting procedure was successfully exploited to produce porous ceramic bodies having controlled porosity features in terms of mean pore size, total pore volume as well as pore geometry. The gel-casting process in which a natural gelatine for food industry is used as gelling agent was firstly set-up to prepare dense alumina and zirconia components. Then, commercial PE spheres, sieved to select proper dimensional ranges, were added to the starting slurries as pore-forming agent. Both alumina and zirconia porous bodies were then produced, having a porosity ranging between 40 and 50 vol%. The fired components were characterised by spherical pores surrounded by highly dense ceramic walls and struts, having a homogeneous and fine microstructure. Their mean pore size was directly dependent on the sieved fraction of the starting PE spheres selected as pore-forming phase.