Surface tailoring of an ethylene propylene diene elastomeric terpolymer via plasma‐polymerized coating of tetramethyldisiloxane

In the research presented here, we explore the use of a low‐energy plasma to deposit thin silicone polymer films using tetramethyldisiloxane (TMDSO) (H(CH₃)₂? Si? O? Si? (CH₃)₂H) on the surface of an ethylene propylene diene elastomeric terpolymer (EPDM) in order to enhance the surface hydrophobicity, lower the surface energy and improve the degradation/wear characteristics. The processing conditions were varied over a wide range of treatment times and discharge powers to control the physical characteristics, thickness, morphology and chemical structure of the plasma polymer films. Scanning electron microscopy (SEM) shows that pore‐free homogeneous plasma polymer thin films of granular microstructure composed of small grains are formed and that the morphology of the granular structure depends on the plasma processing conditions, such as plasma power and time of deposition. The thicknesses of the coatings were determined using SEM, which confirmed that the thicknesses of the deposited plasma‐polymer films could be precisely controlled by the plasma parameters. The kinetics of plasma‐polymer film deposition were also evaluated. Contact angle measurements of different solvent droplets on the coatings were used to calculate the surface energies of the coatings. These coatings appeared to be hydrophobic and had low surface energies. X‐ray photoelectron spectroscopy (XPS) and photoacoustic Fourier‐transform infrared (PA‐FT‐IR) spectroscopy were used to investigate the detailed chemical structures of the deposited films. The optimum plasma processing conditions to achieve the desired thin plasma polymer coatings are discussed in the light of the chemistry that takes place at the interfaces. Copyright © 2004 Society of Chemical Industry     

Shortest path algorithms: A computational study with the C programming language

The main purpose of this study is to evaluate the computational efficiency of algorithms for calculating shortest paths when they are correctly coded by using the C programming language. The eight algorithms that we selected for this experiment are the most efficient, either measured in terms of worst-case bounds or marked as such from previous computational studies; they include the redistributive heap algorithm. We suggest computer implementations that use the full power of C. In particular, the network representation and the various data structures used to keep the scan eligible list may be managed by using only additions and no multiplications, while it is not possible with FORTRAN. These capabilities, unique to C, yield several interesting conclusions: one may expect to speed up a shortest path algorithm by a factor of 20%; in some cases, this factor may reach 30%. Interestingly, the level of programming difficulty required to achieve these benefits is not greater than that required by implementations using arrays.     

A European community source of reference materials for neutron metrology requirements

Recognizing the importance of an assured supply of reference materials of high purity for use as neutron dosimeters, the Monitor Materials subgroup of the European Working Group on Reactor Dosimetry collaborated with the Central Bureau for Nuclear Measurements, Geel, Belgium to establish a list of requirements.CBNM is organizing the availability and characterization of these materials in collaboration with specialist laboratories within the European Community. At present 12 activation and 6 fission dosimetry materials are being examined prior to certification and issue.This source of materials is expected to be of great use for reactor surveillance, interlaboratory comparisons, and other neutron metrology requirements.     

Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.     

Identification of Factors Affecting Preservative Efficacy and Chemical Stability of Lamivudine Oral Solution Through Statistical Experimental Design

To identify factors affecting the chemical stability and preservative efficacy of lamivudine oral liquid formulations, an optimization study using a central composite design was performed. In this design, five factors, each at three levels, were investigated: pH (4.5, 5.5, and 73, sucrose (5%, 20%. and 50% w/v), propylene glycol (0% 2%, and 5% w/v), glycerin (4% 8%, and 12% w/v). and EDTA (0.100. 0.175, and 0.250 mg/mL). All formulations contained a constant concentration of lamivudine, parabens, and artificial strawberry and banana flavors. All formulations were evaluated for preservative effectiveness against USP and BP standards and for chemical stability at 30°C and 40°C for three months. All formulations were effective against bacteria and yeasts, but indicated reduced preservative effectiveness against the mold Aspergillus niger. Preservative effectiveness improved with increasing pH (4.5 to 7.5) and to a lesser extent with increasing EDTA concentration (0.100 to 0.250 mg/mL). Increasing glycerin concentration (4% to 12% w/v) slightly decreased preservative effectiveness. Over the concentration ranges tested, no change in preservative effectiveness was noted with concentration changes in sucrose or propylene glycol. The pH was the main factor influencing the chemical stability of the drug and preservatives in this study. Lamivudine chemical stability increased with increasing pH from 4.5 to 7.5. Methyl and propylparaben showed extensive degradation at pH 7.5.     

Structure of metal site in Cd-substituted His117Gly mutant of azurin with and without addition of imidazole derivatives

The present work uses 111mCd-perturbed angular correlations of gamma-rays (PAC) to investigate the structure of the metal site of the His117Gly mutant of Pseudomonas aeruginosa azurin in aqueous solution and the effect on the structure upon addition of the following exogenous ligands: imidazole, 4-methyl imidazole, 1-methyl imidazole, 2-methyl imidazole and histidine. The nuclear quadrupole interaction of cadmium bound to the mutant without addition of exogenous ligands shows a strong pH dependence with three different nuclear quadrupole interactions consistent with two pKa values at about 7.2 and 8.6 at 2 degrees C. Addition of the imidazole derivatives resulted in a significant change in the PAC spectrum showing that they coordinate. This is in accordance with observations by EPR for the same mutant with copper at the metal site [den Blaauwen, T. & Canters, G. W. (1993) J. Am. Chem. Soc. 115, 1121-1129]. However, whereas EPR and ultraviolet/visual absorption show that the characteristics of the wild-type copper protein are regained by addition of the imidazole derivatives with the exception of the possible bidentates (histidine and histamine), the comparison of the PAC results to model calculations shows that the cadmium ion must be fourfold coordinated in most cases, probably binding an additional water or hydroxide ligand. A fourfold coordination is in contrast to cadmium-substituted wild-type azurin where PAC data inferred a threefold coordination by a Cys and two His residues [Danielsen, E. Bauer, R., Hemmingsen, L., Andersen. M., Bjerrum, M. J., Butz, T., Tr?ger, W., Canters, G. W., Hoitink, C. W. G., Karlsson, G., Hansson, O. & Messerschmidt, A. (1995) J. Biol. Chem. 270, 573-580]     

Fetal Neurobehavioral Development: A Tale of Two Cities.

Longitudinal neurobehavioral development was examined in 237 fetuses of low-risk pregnancies from 2 distinct populations-Baltimore, Maryland, and Lima. Peru-at 20. 24. 28. 32, 36. and 38 weeks gestation. Data were based on digitized Doppler-based fetal heart rate (FHR) and fetal movement (FM). In both groups. FHR declined while variability, episodic accelerations, and FM-FHR coupling increased, with discontinuities evident between 28 and 32 weeks gestation. Fetuses in Lima had higher FHR and lower variability, accelerations, and FM-FHR coupling. Declines in trajectories were typically observed 1 month sooner in Lima, which magnified these disparities. Motor activity differences were less consistent. No sex differences in fetal neurobehaviors were detected. It is concluded that population factors can influence the developmental niche of the fetus. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

To Do or to Have? That Is the Question.

Do experiences make people happier than material possessions? In two surveys, respondents from various demographic groups indicated that experiential purchases-those made with the primary intention of acquiring a life experience--made them happier than material purchases. In a follow-up laboratory experiment, participants experienced more positive feelings after pondering an experiential purchase than after pondering a material purchase. In another experiment, participants were more likely to anticipate that experiences would make them happier than material possessions after adopting a temporally distant, versus a temporally proximate, perspective. The discussion focuses on evidence that experiences make people happier because they are more open to positive reinterpretations, are a more meaningful part of one's identity, and contribute more to successful social relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)