Do ‘green’ buildings have better indoor environments? New evidence

A post-occupancy evaluation (POE) of 12 green and 12 conventional office buildings across Canada and the northern United States was conducted. Occupants (N = 2545) completed an online questionnaire related to environmental satisfaction, job satisfaction and organizational commitment, health and well-being, environmental attitudes, and commuting. In each building on-site physical measurements at a sample of workstations (N= 974) were taken, including: thermal conditions, air quality, acoustics, lighting, workstation size, ceiling height, window access and shading, and surface finishes. Green buildings exhibited superior performance compared with similar conventional buildings. Better outcomes included: environmental satisfaction, satisfaction with thermal conditions, satisfaction with the view to the outside, aesthetic appearance, less disturbance from heating, ventilation and air-conditioning (HVAC) noise, workplace image, night-time sleep quality, mood, physical symptoms, and reduced number of airborne particulates. A variety of physical features led to improved occupant outcomes across all buildings, including: conditions associated with speech privacy, lower background noise levels, higher light levels, greater access to windows, conditions associated with thermal comfort, and fewer airborne particulates. Green building rating systems might benefit from further attention in several areas, including: credits related to acoustic performance, a greater focus on reducing airborne particulates, enhanced support for the interdisciplinary design process and development of POE protocols.

Il a été mené une évaluation après occupation (POE) de 12 immeubles de bureaux verts et 12 immeubles de bureaux classiques répartis à travers le Canada et le nord des Etats-Unis. Les occupants (N?=?2545) ont rempli un questionnaire en ligne portant sur la satisfaction environnementale, la satisfaction au travail et l'implication organisationnelle, la santé et le bien-être, les attitudes environnementales, et les trajets réguliers. Dans chaque immeuble, des mesures physiques in situ sur un échantillon de postes de travail (N?=?974) ont été effectuées, comprenant : les conditions thermiques, la qualité de l'air, l'acoustique, l'éclairage, la taille des postes de travail, la hauteur de plafond, l'accès aux fenêtres et leur occultation, et les finitions de surface. Les bâtiments verts ont affiché des performances supérieures par rapport aux bâtiments classiques similaires. De meilleurs résultats ont été obtenus concernant la satisfaction environnementale, la satisfaction à l'égard des conditions thermiques, la satisfaction à l'égard de la vue sur l'extérieur, l'aspect esthétique, la diminution des perturbations liées aux bruits provenant du chauffage, de la ventilation et de la climatisation (CVC), l'image du lieu de travail, la qualité du sommeil nocturne, l'humeur, les symptômes physiques, et la réduction du nombre de particules en suspension dans l'air. Différentes caractéristiques physiques ont conduit à une amélioration des résultats pour les occupants dans tous les immeubles, concernant notamment les conditions liées à la confidentialité des conversations, les niveaux inférieurs de bruit de fond, les niveaux de luminosité plus élevés, l'accès accru aux fenêtres, les conditions associées au confort thermique, et le nombre moindre de particules en suspension dans l'air. Les systèmes de notation des bâtiments verts pourraient bénéficier d'une plus grande attention apportée à plusieurs domaines, s'agissant en particulier des crédits relatifs aux performances acoustiques, d'un accent accru sur la réduction des particules en suspension dans l'air, d'un soutien renforcé en faveur du processus de conception interdisciplinaire et du développement de protocoles POE.

Mots clés: performances des bâtiments, bilan environnemental, bâtiments verts, environnement intérieur, Leadership in Energy and Environmental Design (LEED), satisfaction des occupants, évaluation après occupation     

Phenol decomposition in water cathode of DC atmospheric pressure discharge in air

We studied phenol decomposition in aqueous solution under the action of DC discharge at atmospheric pressure in air. The decomposition efficiency was 0.017 molecules per 100 eV. When the kinetics of forming destruction products was studied in detail, the peculiarities of air plasma action were revealed for the first time. Plasma action not only results in the formation of oxygen-containing products, which are usually formed under oxygen plasma action (hydroxyhenols, carboxylic acids, aldehydes), but also the formation of nitro phenols. The treatment is accompanied by hydrogen peroxide formation, a pH decrease, and nitric and nitrous acids formation. We also discussed the possible mechanism of the processes and the role of some active species in chemical transformations after determining some parameters of the discharge.     

Binding of Sulpiride to Seric Albumins

The aim of this work was to study the interaction of sulpiride with human serum albumin (HSA) and bovine serum albumin (BSA) through the fluorescence quenching technique. As sulpiride molecules emit fluorescence, we have developed a simple mathematical model to discriminate the quencher fluorescence from the albumin fluorescence in the solution where they interact. Sulpiride is an antipsychotic used in the treatment of several psychiatric disorders. We selectively excited the fluorescence of tryptophan residues with 290 nm wavelength and observed the quenching by titrating HSA and BSA solutions with sulpiride. Stern-Volmer graphs were plotted and quenching constants were estimated. Results showed that sulpiride form complexes with both albumins. Estimated association constants for the interaction sulpiride–HSA were 2.20 (±0.08) × 10⁴ M⁻¹, at 37 °C, and 5.46 (±0.20) × 10⁴ M⁻¹, at 25 °C. Those for the interaction sulpiride-BSA are 0.44 (±0.01) × 10⁴ M⁻¹, at 37 °C and 2.17 (±0.04) × 10⁴ M⁻¹, at 25 °C. The quenching intensity of BSA, which contains two tryptophan residues in the peptide chain, was found to be higher than that of HSA, what suggests that the primary binding site for sulpiride in albumin should be located next to the sub domain IB of the protein structure.     

Energetics of Silica‐Poor Glasses in the Systems MgO–SiO2 and Mg0.5Ca0.5O–SiO2

A series of alkaline‐earth silicate glasses, with compositions ranging from the metasilicate to the ortho‐ and suborthosilicate, have been synthesized by aerodynamic levitation and CO₂ laser melting. They have been studied by high‐temperature oxide melt solution calorimetry with 2PbO·B₂O₃ as solvent. The enthalpies of formation from the oxides at room temperature () have been calculated from the solution enthalpies. Glasses in the Ca_0.5Mg_0.5O–SiO₂ system show greater energetic stability than those in the MgO–SiO₂ system, with a more pronounced negative enthalpy of mixing near the orthosilicate composition. This stabilization may explain why it is possible to prepare glasses poorer in silica (suborthosilicate) in the Ca_0.5Mg_0.5O–SiO₂ system but not in the MgO–SiO₂ system. The thermodynamic observations support earlier structural studies in these systems.     

Polystyrene-poly(2-ethylhexylmethacrylate) block copolymers: Synthesis,bulk phase behavior,and thin film structure

Anionic polymerization was employed to synthesize well-defined diblock copolymers of polystyrene and poly(2-ethylhexylmethacrylate), PS-PEHMA. Diblock morphologies in bulk and in substrate-supported thin films were characterized by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM), respectively. PS-PEHMA diblocks exhibited thermotropic order-disorder transitions; one diblock showed a thermoreversible transition between lamellae and a higher-temperature morphology assigned as perforated lamellae. Unlike PS-poly(alkylmethacrylate) diblocks where the alkyl group is n-butyl or n-pentyl, PS-PEHMA diblocks showed a typical decreasing Flory interaction parameter with increasing temperature. Thin films of PS-cylinder-forming PS-PEHMA diblocks showed a strong preference for the cylinders to lie in the plane of the film; films of incommensurate thickness readily formed terraces. Films of commensurate thickness were easily aligned over macroscopic areas through the application of mechanical shear.     

Maternal Fructose Intake Causes Developmental Reprogramming of Hepatic Mitochondrial Catalytic Activity and Lipid Metabolism in Weanling and Young Adult Offspring

Excess dietary fructose is a major public health concern, yet little is known about its influence on offspring development and later-life disease when consumed in excess during pregnancy. To determine whether increased maternal fructose intake could have long-term consequences on offspring health, we investigated the effects of 10% w/v fructose water intake during preconception and pregnancy in guinea pigs. Female Dunkin Hartley guinea pigs were fed a control diet (CD) or fructose diet (FD; providing 16% of total daily caloric intake) ad libitum 60 days prior to mating and throughout gestation. Dietary interventions ceased at day of delivery. Offspring were culled at day 21 (D21) (weaning) and at 4 months (4 M) (young adult). Fetal exposure to excess maternal fructose intake significantly increased male and female triglycerides at D21 and 4 M and circulating palmitoleic acid and total omega-7 through day 0 (D0) to 4 M. Proteomic and functional analysis of significantly differentially expressed proteins revealed that FD offspring (D21 and 4 M) had significantly increased mitochondrial metabolic activities of β-oxidation, electron transport chain (ETC) and oxidative phosphorylation and reactive oxygen species production compared to the CD offspring. Western blotting analysis of both FD offspring validated the increased protein abundances of mitochondrial ETC complex II and IV, SREBP-1c and FAS, whereas VDAC1 expression was higher at D21 but lower at 4 M. We provide evidence demonstrating offspring programmed hepatic mitochondrial metabolism and de novo lipogenesis following excess maternal fructose exposure. These underlying asymptomatic programmed pathways may lead to a predisposition to metabolic dysfunction later in life.     

Sterically Hindered Quaternary Phosphonium Salts (QPSs): Antimicrobial Activity and Hemolytic and Cytotoxic Properties

Structure–activity relationships are important for the design of biocides and sanitizers. During the spread of resistant strains of pathogenic microbes, insights into the correlation between structure and activity become especially significant. The most commonly used biocides are nitrogen-containing compounds; the phosphorus-containing ones have been studied to a lesser extent. In the present study, a broad range of sterically hindered quaternary phosphonium salts (QPSs) based on tri-tert-butylphosphine was tested for their activity against Gram-positive (Staphylococcus aureus, Bacillus cereus, Enterococcus faecalis) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria and fungi (Candida albicans, Trichophyton mentagrophytes var. gypseum). The cation structure was confirmed to determine their biological activity. A number of QPSs not only exhibit high activity against both Gram-positive and -negative bacteria but also possess antifungal properties. Additionally, the hemolytic and cytotoxic properties of QPSs were determined using blood and a normal liver cell line, respectively. The results show that tri-tert-butyl(n-dodecyl)phosphonium and tri-tert-butyl(n-tridecyl)phosphonium bromides exhibit both low cytotoxicity against normal human cells and high antimicrobial activity against bacteria, including methicillin-resistant strains S. aureus (MRSA). The mechanism of QPS action on microbes is discussed. Due to their high selectivity for pathogens, sterically hindered QPSs could serve as effective tunable biocides.     

MTEP,a Selective mGluR5 Antagonist,Had a Neuroprotective Effect but Did Not Prevent the Development of Spontaneous Recurrent Seizures and Behavioral Comorbidities in the Rat Lithium–Pilocarpine Model of Epilepsy

Metabotropic glutamate receptors (mGluRs) are expressed predominantly on neurons and glial cells and are involved in the modulation of a wide range of signal transduction cascades. Therefore, different subtypes of mGluRs are considered a promising target for the treatment of various brain diseases. Previous studies have demonstrated the seizure-induced upregulation of mGluR5; however, its functional significance is still unclear. In the present study, we aimed to clarify the effect of treatment with the selective mGluR5 antagonist 3-[(2-methyl-1,3-thiazol-4-yl)ethynyl]-pyridine (MTEP) on epileptogenesis and behavioral impairments in rats using the lithium–pilocarpine model. We found that the administration of MTEP during the latent phase of the model did not improve survival, prevent the development of epilepsy, or attenuate its manifestations in rats. However, MTEP treatment completely prevented neuronal loss and partially attenuated astrogliosis in the hippocampus. An increase in excitatory amino acid transporter 2 expression, which has been detected in treated rats, may prevent excitotoxicity and be a potential mechanism of neuroprotection. We also found that MTEP administration did not prevent the behavioral comorbidities such as depressive-like behavior, motor hyperactivity, reduction of exploratory behavior, and cognitive impairments typical in the lithium–pilocarpine model. Thus, despite the distinct neuroprotective effect, the MTEP treatment was ineffective in preventing epilepsy.