SEM evaluation of thermoplastic endodontic materials alterations after disinfection: a new experimental model

This study assessed a new experimental model to analyze the effects of sodium hypochlorite solution 2.5% for 10 min and chlorhexidine 2% for 15 s on cones surface alterations. Twenty five gutta-percha and 25 thermoplastic synthetic polymer-based cones had their last 1 mm from the tapered end examined by scanning electron microscopy (SEM) before and after being exposed to the disinfectant solutions. To allow the surfaces to be compared, the samples were not metalized, a voltage of 1 kV was used and the images were captured within standardized angles. The samples were immersed on the test solutions. The comparison of the alterations of the cones was performed using the software program Adobe Photoshop CS. A measurement was taken of the standard deviations of the pixel intensity in this area, higher standard deviations represent more irregular areas. Differences in standard deviation before and after disinfection for each cone were compared between groups by means of analysis of variance supplemented by the Tukey test. Gutta-percha cones showed higher standard deviations than Resilon cones (P < 0.001). In the gutta-percha cones, sodium hypochlorite generated more irregular areas than chlorhexidine and the control group (P < 0.001). The present study has demonstrated the feasibility of using a modified SEM method. This opens opportunities to the use of new and precise tools for evaluating a sample in different moments.     

From design of bio-based biocomposite electrospun scaffolds to osteogenic differentiation of human mesenchymal stromal cells

Electrospinning coupled with electrospraying provides a straightforward and robust route toward promising electrospun biocomposite scaffolds for bone tissue engineering. In this comparative investigation, four types of poly(3-hydroxybutyrate) (PHB)-based nanofibrous scaffolds were produced by electrospinning a PHB solution, a PHB/gelatin (GEL) mixture or a PHB/GEL/nHAs (hydroxyapatite nanoparticles) mixed solution, and by electrospinning a PHB/GEL solution and electrospraying a nHA dispersion simultaneously. SEM and TEM analyses demonstrated that the electrospun nHA-blended framework contained a majority of nHAs trapped within the constitutive fibers, whereas the electrospinning-electrospraying combination afforded fibers with a rough surface largely covered by the bioceramic. Structural and morphological characterizations were completed by FTIR, mercury intrusion porosimetry, and contact angle measurements. Furthermore, an in vitro investigation of human mesenchymal stromal cell (hMSC) adhesion and proliferation properties showed a faster cell development on gelatin-containing scaffolds. More interestingly, a long-term investigation of hMSC osteoblastic differentiation over 21 days indicate that hMSCs seeded onto the nHA-sprayed scaffold developed a significantly higher level of alkaline phosphatase activity, as well as a higher matrix biomineralization rate through the staining of the generated calcium deposits: the fiber surface deposition of nHAs by electrospraying enabled their direct exposure to hMSCs for an efficient transmission of the bioceramic osteoinductive and osteoconductive properties, producing a suitable biocomposite scaffold for bone tissue regeneration.     

Involvement of Inflammation and Its Resolution in Disease and Therapeutics

Inflammation plays a critical role in the response to and survival from injuries and/or infections. It occurs in two phases: initiation and resolution; however, when these events do not resolve and persist over time, the inflammatory response becomes chronic, prompting diseases that affect several systems and organs, such as the vasculature and the skin. Here, we reviewed inflammation that occurs in selected infectious and sterile pathologies. Thus, the immune processes induced by bacterial sepsis as well as T. cruzi and SARS-CoV-2 infections are shown. In addition, vaccine adjuvants as well as atherosclerosis are revised as examples of sterile-mediated inflammation. An example of the consequences of a lack of inflammation resolution is given through the revision of wound healing and chronic wounds. Then, we revised the resolution of the latter through advanced therapies represented by cell therapy and tissue engineering approaches, showing how they contribute to control chronic inflammation and therefore wound healing. Finally, new pharmacological insights into the management of chronic inflammation addressing the resolution of inflammation based on pro-resolving mediators, such as lipoxin, maresin, and resolvins, examining their biosynthesis, biological properties, and pharmacokinetic and pharmaceuticals limitations, are given. We conclude that resolution pharmacology and advanced therapies are promising tools to restore the inflammation homeostasis.     

Chitosan gel beads as drug carriers2. Release of 8-hydroxy-7-iodoquinoline-5-sulfonic acid and 2,5-dihydroxybenzenesulfonic acid

It is shown that chitosan gel beads are suitable carriers of 8-hydroxy-7-iodoquinoline-5-sulfonic acid (SQ) and 2,5-dihydroxybenzenesulfonic acid (DHBSA) - substances applied in medicine. Drug release has been investigated with respect to the nature of the crosslinking agent (epichlorohydrin or glutaraldehyde) and pH of the medium. Considerable differences in the release rate of DHBSA and SQ have been found. The total amount of the desorbed SQ, as well as the release rate of the drug depends on pH of the medium - they decrease from alkaline to acidic medium. The antimicrobial and antimycotic activity of the loaded with SQ beads is demonstrated.     

(+)-Dehydroabietic Acid,an Abietane-Type Diterpene,Inhibits Staphylococcus aureus Biofilms in Vitro

Potent drugs are desperately needed to counteract bacterial biofilm infections, especially those caused by gram-positive organisms, such as Staphylococcus aureus. Moreover, anti-biofilm compounds/agents that can be used as chemical tools are also needed for basic in vitro or in vivo studies aimed at exploring biofilms behavior and functionability. In this contribution, a collection of naturally-occurring abietane-type diterpenes and their derivatives was tested against S. aureus biofilms using a platform consisting of two phenotypic assays that have been previously published by our group. Three active compounds were identified: nordehydroabietylamine (1), (+)-dehydroabietic acid (2) and (+)-dehydroabietylamine (3) that prevented biofilm formation in the low micromolar range, and unlike typical antibiotics, only 2 to 4-fold higher concentrations were needed to significantly reduce viability and biomass of existing biofilms. Compound 2, (+)-dehydroabietic acid, was the most selective towards biofilm bacteria, achieving high killing efficacy (based on log Reduction values) and it was best tolerated by three different mammalian cell lines. Since (+)-dehydroabietic acid is an easily available compound, it holds great potential to be used as a molecular probe in biofilms-related studies as well as to serve as inspirational chemical model for the development of potent drug candidates.     

Rich bioactive phenolic extract production by microbial biotransformation of Brazilian Citrus residues

Flavanones in Citrus are molecules that play an important role in antioxidant activities in nutraceutical products. Recent studies indicate that molecules of the simplest classes of phenolics have higher biological activity and absorption capacity. However, the molecules that have been shown to be very important bioactive compounds of Citrus, such as hesperetin, naringenin and ellagic acid, are found in trace concentrations in the fruit. An interesting environmentally friendly alternative that deserves attention regarding phenolic compound obtaining is the biotransformation of these molecules. The aim of this study was to develop a process of biotransformation of phenolics from Brazilian Citrus residues by solid-state fermentation with the microorganism Paecilomyces variotii. The optimized fermentation conditions were 10 g of Citrus residues (2.0 mm of substrate particle size), 20 mL distilled water, at 32 °C after 48 h of incubation. The development of this process has generated, simultaneously, an increase of 900, 1400 and 1330% of hesperetin, naringenin and ellagic acid concentration, respectively, and an increase of 73% of the antioxidant capacity. These results give strong evidence that microbial biotransformation does not only produce phenolic compounds but also compounds with high biological activity, such as hesperetin and naringenin.     

Environmental impact of poultry production systems on surface water: monitoring the Taquari-Antas basin,southern Brazil

ABSTRACT

The research evaluated the impact of poultry farming on the quality of surface waters in a mountainous area of southern Brazil, in order to collect data and assist in the decision-making for sustainable development. The study monitored 13 spots for two years in the sub-basins with intense poultry activity. The water samples were submitted to physicochemical and microbiological analyses in order to assess the Water Quality Index (WQI). The data were analysed by principal component analysis and Pearson’s correlation. Some zones are able to receive future investments and could serve as a basis for the installation of new agricultural units. Others require greater attention from the environmental control agencies.     

Method for studying the effects of thermal deformations on optical systems for space application

In this paper, the results of the thermo-elastic analysis performed on the stereo channel of the imaging system Integrated Observatory System for the BepiColombo European Space Agency mission to Mercury are presented. The aim of the work is to determine the effects of ambient parameter variations on the equipment performance; the optical performance is changing during the mission lifetime primarily because of the optics misalignments and deformations induced by temperature variations. The camera optics and their mountings are modeled and processed by a thermo-mechanical finite element model (FEM) program, which reproduces the expected optics and structure thermo-elastic deformations in the instrument foreseen operative temperature range, i.e., between -20 °C and 30 °C. The FEM outputs are elaborated using a MATLAB optimization routine: an algorithm based on nonlinear least square data fitting is adopted to determine the surface equation (plane, spherical, nth polynomial) which best fits the deformed optical surfaces. The obtained surfaces are then directly imported into a ZEMAX code for sequential ray-tracing analysis. Variations of the optical spot diagrams, modulation transfer function curves, and ensquared energy are then computed. The overall analysis shows that the preferred solution for mounting the optical elements is adopting the kinematic constraints instead of using the classical glue solution.