Dimensional analysis for planetary mixer: Mixing time and Reynolds numbers

Mixing time number is a convenient parameter to characterize mixing performance of stirred tanks. This dimensionless number is now well established for agitated vessels equipped with vertically and centrally mounted impeller for Newtonian as well as for non-Newtonian fluids. To our knowledge, there is more ambiguity concerning its definition for planetary mixers especially when they have dual motion (around two perpendicular axes) to achieve homogenization. In this study, dimensional analysis of mixing time and reliability of the modified Reynolds and mixing time numbers are proposed for such a planetary mixer particularly named as TRIAXE^® system. These two numbers are based on the maximum tip speed of mixer as the characteristic velocity. Modified dimensionless numbers are consistent with the definition of conventional Reynolds and mixing numbers (when only one revolving motion around the vertical axis of the mixing device occurs in the vessel).Mixing time experiments with TRIAXE^® mixer for highly viscous Newtonian fluids showed that the proposed modified Reynolds and mixing time numbers succeeded to obtain a unique mixing curve irrespective of the different speed ratio chosens. This agreement proves that the proposed modified dimensionless numbers can be well adapted for engineering purposes and they can be used to compare the mixing performance of planetary mixers.     

Influence of Liquid Phase Additives on Structural and Sintering Behaviour of Samarium Modified Lead Titanate Ceramics

The combination of metal oxides Bi₂O₃:Li₂O in a ratio 89:11 gives a eutectic with a melting point of ～680°C. Such a low melting point oxide combination creates a working liquid phase at a highly favorable temperature for use as a densification aid. A liquid—phase sintering aid incorporating Bi₂O₃ and Li₂O is presented which demonstrates not only a reduction in the required sintering temperature but also shows relatively higher ‘c/a’ ratio (tetragonality) of PbTiO₃ ceramics with no fragility of the samples. Detailed dilatometric investigations have been performed in order to study the dominant shrinkage mechanism in the present system. Besides acting as a liquid phase fluxing agent, Bi₂O₃/Li₂O also behave as Curie shifter, which decreases Curie temperature in lead titanate system. The Curie temperature has also been verified from the thermal expansion behavior of sintered specimens. The value of dielectric constant increases after poling which may be due to the dominance of 180° domain wall over 90°.     

Forecasting the trend of international scientific collaboration

The study demonstrates an integrated method of forecasting the trend of a country’s publications. In this context the paper examines international collaboration in a country’s overall publication and forecasts its future trend. The integrated method is based on regression and scaling relationship. India is taken as a case study for this examination. The study shows some interesting features of India’s publication pattern based on time-series data. One observes exponential nature of her publication growth from 2002 onwards. International collaboration also exhibits exponential growth roughly from the same period. Also one observes the faster growth of international collaborative papers than the overall growth of research papers. The study predicts values of number of internationally collaborative papers for the years 2015 and 2020. The robustness of the method is also demonstrated.     

An investigation of normal and submerged condition on microstructural and tribological properties of friction stir processed AZ91-D magnesium alloy

A comparative study of micro-structural transformations and tribological properties of the friction stir processed AZ91-D magnesium (Mg) alloy in normal friction stir processing (NFSP) and submerged friction stir processing (SFSP) conditions was carried out. The optimum parameters used for processing were tool rotational speed of 1000?rpm/min, 50?mm/min of transverse speed and 6 numbers of passes. A significant reduction in grain size (28.7% and 13.1%) and increase in micro-hardness (14.55% and 8.92%) along depth and width of stir zone (SZ) of SFSPed specimen has been achieved as compared to NFSPed specimens. This change can be attributed to the dynamic recrystallisation and removal of excess frictional heat leading to inhibited post-grain growth in the processed alloy. Pin-on-disc sliding wear testing was conducted to compare the wear performance of NFSPed and SFSPed specimens. The SFSPed specimen has shown an improved wear resistance as compared to NFSPed specimens. The major prevailing wear mechanisms were abrasion, delamination, oxidation and mild plastic deformation.     

On Plastic Deformation Behavior of Cryorolled AA8090 Alloy

AA8090 alloy was rolled up to 50 and 75 % reductions at both liquid nitrogen (LNR) and room temperatures (RTR). Both hardness and tensile behavior were evaluated on rolled samples. Optical microscope, TEM and EBSD were used for detailed microstructural examination of rolled samples. Williamson-Hall peak broadening analysis on X-ray diffraction data was made to evaluate crystallite size, lattice strain and dislocation density. An enhanced tensile strength was evidenced in LNR samples when compared to RTR samples without sacrificing ductility, which was ascribed to the higher density of dislocations in LNR samples than RTR samples. A large number of dislocation tangled regions along with ultrafine grain structure were evidenced through TEM and EBSD. Significant fraction of special boundaries in combination with increased fraction of texture components like S, Brass, Cu and Goss would be another reason for enhanced properties in LNR conditions than that of RTR. These components were observed to be strengthened with increased rolling reduction. Work hardening behavior clearly evidenced the variation in amount of work hardening and recovery phenomenon. It showed large variation in recovery in the case of 50 % reduction than that of 75 % reduction, which was attributed to significantly higher density of dislocations in 75 % rolled samples in RTR and LNR.     

A Real-Time Application of Modified Inductor Coupled KY Converter Topology in Speed Control of E-Bikes

Abstract

Congested road network and traffic jam lead to vehicle idling and fuel wastage. An E-bike which is a solution to this is often available with Thumb Throttle Mechanism and single speed operation. A motor controller with multiple output voltage levels and Click Throttle Mechanism is presented in this paper which provides variable speed operation, better power utilization and is highly economical. Proposed modified KY converter utilizes the turns ratio of an On-Line Tap Changer (OLTC) to generate multiple output voltages for variable speed commutation. This possess a stable continuous conduction mode throughout its operation and reduced switching transients when compared to the existing topologies. Mutually independent control variables namely turns ratio and duty ratio, are used here for voltage conversion, which facilitates the flexible transition between multiple output voltage levels. A 15?W prototype of the proposed modified inductor coupled KY converter is realized using Arduino Uno Board.     

Influence of iron doping towards the physicochemical and biological characteristics of hydroxyapatite

Hydroxyapatite (HAP) is the naturally occurring mineral form of calcium apatite and the most studied material as a bone substituent. Considering HAP's inherent properties, this study explored changes in HAP's characteristics from doping with other metals such as Fe. To form pure HAP and Fe-HAP with different amounts of Fe, we used the hydrothermal approach, and the composites that formed were thoroughly analyzed for their crystallinity, surface bonding, morphology, magnetic behavior, mechanical strength, biocompatibility, hemocompatibility, and in vitro cytotoxicity. The powder XRD studies confirmed the samples' crystallinity, and the lowest crystalline size was 19.7 nm in 10Fe-HAP. The FTIR analysis confirmed the formation of HAP by the hydroxyl, phosphate, and carbonate groups. The FESEM demonstrated that the morphology of the pure HAP was rod-shaped, which transformed into spheres after Fe doping. The EDS analysis confirmed the successful formation of HAP and Fe-HAP composites. The magnetic studies indicated the diamagnetic behavior of the pure HAP, while the Fe-doped HAPs had a superparamagnetic nature with saturation magnetizations (M_s) of 2Fe-HAP, 4Fe-HAP, and 10Fe-HAP at 0.0062, 0.0092, and 0.029 emu/g respectively. Assessment of the mechanical properties, biocompatibility, hemocompatibility, and cytotoxicity indicated that the Fe-doped HAPs were superior to the pure HAP, and among the Fe-HAPs, the 10Fe-HAP) had the highest amount of Fe and the best characteristics. The studies also indicated that Ca²⁺ interactions influenced the cells via HAP doping with that of Fe, equally increasing the physicochemical and biological properties.     

Thermal and Mechanical Properties of ACoO3 (R = Sm, Tb, Dy, Ho, and Er)

The thermal and mechanical properties of orthocobaltates, ACoO₃ (A = Sm, Tb, Dy, Ho, and Er), have been investigated using the modified rigid ion model (MRIM) by incorporating the effect of lattice distortions. We have computed the variations of specific heat and thermal expansion coefficient for these orthocobaltates in wide temperature range of 1 K (?272 °C) ≤ T ≤ 1000 K (727 °C). The calculated results of specific heat, thermal expansion, bulk modulus, and other thermal and mechanical properties accord very well with the available experimental data, implying that MRIM represents properly the nature of the perovskite-type rare earth cobaltates. In addition, we have also reported the results on molecular force constant (f), Reststrahlen frequency (υ), cohesive energy (?), Debye temperature (θ _D), and Gruneisen parameter (γ).     

Cognitive Mapping and Planning for Visual Navigation

International Journal of Computer Vision - We introduce a neural architecture for navigation in novel environments. Our proposed architecture learns to map from first-person views and plans a...