Ordering and structural transformations in Ni3Al alloys

X-ray diffraction profile studies on the filings of stoichiometric and off-stoichiometric compositions of Ni₃Al alloys, with and without boron additions, were conducted to clarify some of the significant anomalies noticed in the literature. The long-range order parameter was estimated as a function of temperature in all the four alloys from (1 0 0)/(2 0 0) and (1 1 0)/(2 2 0) pairs of reflections. The L1₂ structure appears to attain a maximum stability at about 600 °C, around which temperature its order parameter was close to the theoretical value. Above 600 °C, this structure becomes less stable and there appears to be formation of an additional structure of a lower symmetry. Also in the Materials Science Section, Faculty of Mechanical Engineering, University of Twente, Enschede, The Netherlands.     

Influence of sea water solution on mortar containing calcium carbonate

Normal Portland cement mortar discs containing precipitated or ground limestone at dosages of 0, 2.5, 5 and 15% were made at water/cement ratios of 0.42 or 0.60. They were hydrated in lime water or sea water solution for periods up to 1 year. The length and modulus of elasticity changes were monitored periodically. Some mortars containing CaCO₃ exhibited more than three times the expansion of the reference in sea water. The expansions were greater in samples containing fine CaCO₃. The modulus of elasticity was especially low for samples containing precipitated CaCO₃ and exposed to sea water.     

Origin of room-temperature ferromagnetism in cobalt-doped ZnO

Thin films of ZnO doped with cobalt have been grown by the pulsed laser deposition (PLD) technique in different temperatures ranging from 500°C to 650°C. The films grown on sapphire c-plane single crystal were found to be highly epitaxial. Magnetic properties of these films were studied, and the films exhibited ferromagnetic characteristics at room temperature. Detailed structural and microstructural characterization was performed to correlate the fate of the magnetic impurities, i.e., cobalt, and the cause of magnetic properties. It is established from this work that the magnetic properties of these films are inherent to the system, and any presence of second phase/nanoclusters/precipitates are ruled out as the cause of magnetic properties. The techniques used to establish these were conventional and high-resolution transmission electron microscopy (HRTEM) along with electron-energy loss spectroscopy (EELS) and scanning transmission electron microscopy-atomic number (STEM-Z) contrast studies.     

Implementation of an 8-Core, 64-Thread, Power-Efficient SPARC Server on a Chip

The second in the Niagara series of processors (Niagara2) from Sun Microsystems is based on the power-efficient chip multi-threading (CMT) architecture optimized for Space, Watts (Power), and Performance (SWaP) [SWap Rating = Performance/(Space _* Power) ]. It doubles the throughput performance and performance/watt, and provides >10times improvement in floating point throughput performance as compared to UltraSPARC T1 (Niagara1). There are two 10 Gb Ethernet ports on chip. Niagara2 has eight SPARC cores, each supporting concurrent execution of eight threads for 64 threads total. Each SPARC core has a floating point and graphics unit and an advanced cryptographic unit which provides high enough bandwidth to run the two 10 Gb Ethernet ports encrypted at wire speeds. There is a 4 MB Level2 cache on chip. Each of the four on-chip memory controllers controls two FBDIMM channels. Niagara2 has 503 million transistors on a 342 mm² die packaged in a flip-chip glass ceramic package with 1831 pins. The chip is built in Texas Instruments' 65 nm 11LM triple-Vt CMOS process. It operates at 1.4 GHz at 1.1 V and consumes 84 W.     

Real-world design as a one-semester undergraduate project: example of a robust and low-cost solar lantern

The purpose of this project was to develop a rugged and efficient solar lantern. The lantern was designed to meet the requirements of persons who reside in areas in which access to the electrical grid is limited and whose resources do not permit import of electrical generation capabilities. A representative of a missionary organization operating in Africa developed the original set of specifications for the solar lantern. It will be used by the local school children for doing homework in the evening. These specifications prioritized reliability, ease of operation, rugged construction, portability, and low cost. The resulting design was realized in a single prototype. The design and construction of the prototype was completed as a student/faculty project in the Junior Engineering Clinic course at Rowan University in Glassboro, NJ. It was funded and directed by ETM Solar Works, a New York-based corporation.     

Carbon Nanotube Pullout,Interfacial Properties,and Toughening in Ceramic Nanocomposites: Mechanistic Insights from Single Fiber Pullout Analysis

While debonding and subsequent pullout at fiber‐matrix interfaces can improve fracture toughness in ceramic nanocomposites, the magnitudes of these contributions are currently the subject of ongoing debate. To provide quantitative insight into these mechanisms, ceramic matrix nanocomposites were fabricated with a polymer‐derived ceramic matrix, using multiwalled carbon nanotubes (MWCNTs) that exhibit relatively long pullout lengths. In situ micromechanical pullout tests on individual MWCNTs were used to directly measure the strength of the fiber‐matrix interface. Similar pullout lengths were also observed in bulk and thin film composites, where the fracture toughness of the composite films was measured and found to be higher than that of the matrix material. The interfacial properties from the micromechanical test and the pullout lengths from the composite films were then used to estimate the energy release rates for fiber debonding and pullout. Based on the observed MWCNT and composite failure mechanisms, these results are discussed in terms of their relation to previous estimates of toughening in MWCNT‐ceramic nanocomposites, and in terms of design possibilities for further fracture toughness improvements.     

In Vitro Antiamoebic Activity Evaluation and Docking Studies of Metronidazole–Triazole Hybrids

An in‐house database of 520 compounds was docked against Entamoeba histolytica thioredoxin reductase (EhTrR), a promising target for the treatment of amoebiasis. Amongst these, some metronidazole (MTZ)–triazole hybrids were ranked high, with docking scores from ?10.23 to ?7.56. Studies of the binding orientations and conformations show that the head groups of MTZ–triazole hybrids interact with the arginine residues within the binding pocket of EhTrR, making it clear that such is the optimal and most reliable orientation for this class of compounds. The top‐ten MTZ–triazole hybrids were then selected for evaluation of their activity against the HM1:IMSS strain of amoeba. The most active compound, 2‐pyridyl‐(1,2,3‐triazolyl)metronidazole 10 , with an IC₅₀ value of 8.4 nM , was significantly more active than the standard drug MTZ alone. Docking studies revealed that compound 10 may act as an EhTrR inhibitor with activity in the nanomolar range and satisfactory ADME properties; it is a suitable candidate to be carried forward as a potential lead in the discovery of drugs to combat amoebiasis.     

Structural and Spectroscopic Studies of Sm3+/CdS Nanocrystallites in Sol–Gel TiO2-ZrO2 Matrix

A sol–gel method was used to prepare titania-zirconia matrices doped with Sm³⁺/CdS nanocrystallites. The structural properties of the matrices were characterized using transmission electron microscopy (TEM), thermogravimetric analysis (TGA), differential thermal analysis (DTA), and Fourier-transform infrared spectroscopy studies. The thermal stability of the material was determined by TGA/DTA analysis. The absorption spectrum shows the characteristic peaks of the Sm³⁺ ions and the absorption peak corresponding to the CdS nanocrystallites. The optical bandgap and size of the CdS nanoparticles were calculated from the absorption spectrum. From TEM, the interplanar distance (d) was estimated to be 3.533 Å, which matches with the (1 0 0) plane of bulk CdS. The measurements yield a nanocrystallite size of around 7.8 nm. The optical absorption and emission spectra confirmed the formation of CdS nanoparticles along with samarium ions in the titania-zirconia matrices. The fluorescence intensity of the samarium ions was found to be greatly enhanced by codoping with CdS nanocrystallites.