Significance of low water—solid ratio and temperature on the physico-mechanical characteristics of hydrates of tricalcium aluminate

Hydration characteristics are reported of tricalcium aluminate studied at 20 and 80 °C using water-solid ratios of 0.2 and 1.0. Hydration products were subjected to differential thermal analysis, thermogravimetric analysis, scanning electron microscopy, length change, porosity and pore size distribution, and micro-hardness measurements. Hydration proceeds faster at 80 °C than at 20 °C and the cubic C₃AH₆ phase is detected in the first few seconds. At 20 °C hydration occurs with the initial formation of the hexagonal phases and expansion is continuous. At higher temperatures and a water-solid ratio of 0.2, after an initial small expansion, the dimensional change is low. The product at 80 °C develops more than fourfold the hardness value developed at 20 °C. After 2 days of hydration, porosity, per cent C₃AH₆ and microhardness are 15.2%, 83% and 38.9 kg/mm²; corresponding values for the product obtained at 20 °C are 21.5%, 75% and 9.1 kg/mm². Microstructural examination of the material formed at 80 °C indicates a closely welded and continuous network of the cubic phase. These results reveal that at a low water-solid ratio and higher temperatures the formation of the cubic phase from C₃A results in an enhancement of strength.     

Synthesis of transfer functions by nonsymmetrical lattice networks using lossy coils

A method for realising a v.t.f.by a nonsymmetrical lattice in which all coils can be made lossy is given.     

Influence of crack closure on the stress intensity factor for plates subjected to bending—A 3-D finite element analysis

Plates with central through cracks subjected to bending is analysed taking into account the closure of the crack faces on the compression side. A three-dimensional finite element method employing three-dimensional degenerate solid element is used for the analysis. The crack faces have been modelled such that they come in contact over an area on the compression side and interfere with each other. The influence of the crack closure on the variation of the stress intensity factor across the plate thickness is obtained for finite and infinite plate geometries.     

Large amplitude vibrations of circular plates with mixed boundary conditions

In this paper, a method of analysing large amplitude vibrations of circular plates with mixed boundary conditions is explained and is illustrated with an example where part of the boundary is clamped and the remaining simply-supported     

A high-performance computing method for data allocation in distributed database systems

Enhancing the performance of the DDBs (Distributed Database system) can be done by speeding up the computation of the data allocation, leading to higher speed allocation decisions and resulting in smaller data redundancy and shorter processing time. This paper deals with an integrated method for grouping the distributed sites into clusters and customizing the database fragments allocation to the clusters and their sites. We design a high speed clustering and allocating method to determine which fragments would be allocated to which cluster and site so as to maintain data availability and a constant systemic reliability, and evaluate the performance achieved by this method and demonstrate its efficiency by means of tabular and graphical representation. We tested our method over different network sites and found it reduces the data transferred between the sites during the execution time, minimizes the communication cost needed for processing applications, and handles the database queries and meets their future needs.     

Turbo equalization of serially concatenated turbo codes using a predictive DFE-based receiver

This paper investigates the performance of various “turbo” receivers for serially concatenated turbo codes transmitted through intersymbol interference (ISI) channels. Both the inner and outer codes are assumed to be recursive systematic convolutional (RSC) codes. The optimum turbo receiver consists of an (inner) channel maximum a posteriori (MAP) decoder and a MAP decoder for the outer code. The channel MAP decoder operates on a “supertrellis” which incorporates the channel trellis and the trellis for the inner error-correcting code. This is referred to as the MAP receiver employing a SuperTrellis (STMAP). Since the complexity of the supertrellis in the STMAP receiver increases exponentially with the channel length, we propose a simpler but suboptimal receiver that employs the predictive decision feedback equalizer (PDFE). The key idea in this paper is to have the feedforward part of the PDFE outside the iterative loop and incorporate only the feedback part inside the loop. We refer to this receiver as the PDFE-STMAP. The complexity of the supertrellis in the PDFE-STMAP receiver depends on the inner code and the length of the feedback part. Investigations with Proakis B, Proakis C (both channels have spectral nulls with all zeros on the unit circle and hence cannot be converted to a minimum phase channel) and a minimum phase channel reveal that at most two feedback taps are sufficient to get the best performance. A reduced-state STMAP (RS-STMAP) receiver is also derived which employs a smaller supertrellis at the cost of performance.     

Optimization of Welding Process Parameters for 9Cr-1Mo Steel Using RSM and GA

Optimization of A-TIG welding process parameters for 9Cr-1Mo steel has been carried out using response surface methodology (RSM) and genetic algorithm (GA). RSM has been used to obtain the design matrix for generating data on the influence of process parameters on the response variables. A second-order response surface model was developed for predicting the response for the set of given input variables. Then, numerical and graphical optimization was performed using RSM to obtain the target depth of penetration (DOP) and heat-affected zone (HAZ) width using desirability approach. Multiple regression models were developed based on the generated data, and then the models were used in GA to determine the optimum process parameters for achieving the target DOP and HAZ width. GA-based models employed two different selection processes. Both the RSM- and GA-based models suggested a number of solutions in terms of process parameters, and the identified solutions were validated by experiments. GA-based model employing tournament selection has been found to be a more accurate method for determining the optimum A-TIG welding process parameters.     

Intelligent power management in micro grids with EV penetration

Large deployment of Electric Vehicles (EVs) adds new challenges in the operation of a microgrid. Assuming that a number of EV owners allow their batteries to charge when their cars are parked, this paper proposes an approach that aims to find suitable individual active power set-points corresponding to the hourly charging rate of each EV battery connected to the microgrid. A multi agent system based controller is designed to find these active power set points for optimal power management of EVs, distributed energy resources in the microgrid, and the loads.     

A technique for generating natural colour images from false colour composite images

Colour is widely used in remote sensing work. In many instances, the use of colour conveys additional information both visually and scientifically. Remote sensing satellites view the earth in different spectral bands, viz. near infrared (NIR), red, green, and blue bands, in a conventional multispectral imaging system. In the absence of a blue channel, colour images can be generated using near infrared, red, and green bands in what is known as a false colour composite (FCC) and does not look natural, like the image we see with the naked eye. For a trained interpreter, this does not pose any problems. However, when the intended use is a fly‐through of a draped terrain, visual interpretation, or a display, meant for the non‐remote sensing professional, this becomes a handicap. To overcome this, there is a requirement to generate natural colour composites (NCC) from the given false colour composite, which demands the simulation of a blue band to be combined with green and red bands. This paper describes a unique method of generating a blue band to form natural colour images from a given false colour image set. We use a spectral transformation method to establish a relationship between the false colour and true colour image pairs provided by a sensor with all the four bands, which has a broader spectral coverage. A transformation function is fitted by selecting radiometric control points along the line of geometric registration to find a set of coefficients to be used for simulating a blue band. This blue band, along with the green and red bands, provides a near true colour or ‘natural colour’ on the display. In this paper, we present a set of adjustable radiometric transformation coefficients to accommodate variation in spatial and dynamic range offered by sensors to generate natural colour. These coefficients seem to work on a large number of images of different seasons, provided similar spectral bands and terrain are used. The proposed ‘natural colour generator’ can be used in changing false colour images to natural colour images with the aim of ‘what you get is what you would have seen’.