A tricyclazole selective chitosan/Fe3O4 magnetic molecularly imprinted polymer (MMIP) was synthesized using non-covalent binding polymerization involving methacrylic acid (MAA) as functional monomer, divinylbenzene (DVB-80) as crosslinker, 2,2'-azobisisobutyronitrile as initiator, acetonitrile/toluene (75:25, v/v) as porogenic solvent and tricyclazole as template. Surface morphology and magnetic characterization of the prepared imprinted and non-imprinted polymers were done using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry and vibrating sample magnetometry, respectively. The adsorption kinetic data fitted best in pseudo-second-order model. The adsorption equilibrium was achieved in 30 min and the maximum binding capacity was 4579.9 µg/g. The Freundlich isotherm model was found suitable for explaining the binding isotherm data (R2 > 0.99). Negative values of thermodynamic parameters ∆G (Gibb’s free energy), ∆H (enthalpy), and ∆S (entropy) revealed exothermic and spontaneous nature of adsorption processes. It also revealed decreased randomness at the solid–liquid interface during sorption. The scatchard plot analysis suggested heterogeneity of binding sites on MMIPs. The molecular recognition selectivity of MMIPs towards tricyclazole was much higher, as compared to its structural analogues, tebuconazole (α = 28.58) and hexaconazole (α = 37.16). The MMIPs were successfully applied to separate and enrich tricyclazole from fortified samples of rice and water, with a recovery percentage of 89.4% and 90.9%, respectively. These reusable imprinted polymers possessing high selectivity and specificity can be utilized as an adsorbent for solid-phase extraction in sample preparation for tricyclazole residue analysis in complex environmental matrices.
Journal of Computational Electronics - A novel integrated design and simulation approach is applied to analyze the performance of a metal–oxide–semiconductor field-effect transistor... 相似文献
The grinding operation is considered to be equivalent to a moving band source of heat and mechanical load on the surface of a semi-infinite solid, producing very high temperature on the surface of the workpiece. The resulting temperature may result in high stress in the workpiece. It is thus desirable to be able to predict the stress levels expected during the grinding process. 相似文献
Silicon - We investigate the performance of a dielectric modulated dual-metal double-gate with low-k/high-k oxide stack junctionless MOSFET (DM-DG-LK/HK-S JL-MOSFET) based sensor device for... 相似文献
Breast cancer (BC) is a leading cause of cancer deaths in women in less developed countries and the second leading cause of cancer death in women in the U.S. In this study, we report the inhibition of E2-mediated mammary tumorigenesis by Cuminum cyminum (cumin) administered via the diet as cumin powder, as well as dried ethanolic extract. Groups of female ACI rats were given either an AIN-93M diet or a diet supplemented with cumin powder (5% and 7.5%, w/w) or dried ethanolic cumin extract (1%, w/w), and then challenged with subcutaneous E2 silastic implants (1.2 cm; 9 mg). The first appearance of a palpable mammary tumor was significantly delayed by both the cumin powder and extract. At the end of the study, the tumor incidence was 96% in the control group, whereas only 55% and 45% animals had palpable tumors in the cumin powder and extract groups, respectively. Significant reductions in tumor volume (660 ± 122 vs. 138 ± 49 and 75 ± 46 mm3) and tumor multiplicity (4.21 ± 0.43 vs. 1.16 ± 0.26 and 0.9 ± 0.29 tumors/animal) were also observed by the cumin powder and cumin extract groups, respectively. The cumin powder diet intervention dose- and time-dependently offset E2-related pituitary growth, and reduced the levels of circulating prolactin and the levels of PCNA in the mammary tissues. Mechanistically, the cumin powder diet resulted in a significant reversal of E2-associated modulation in ERα, CYP1A1 and CYP1B1. Further, the cumin powder diet reversed the expression levels of miRNAs (miR-182, miR-375, miR-127 and miR-206) that were highly modulated by E2 treatment. We analyzed the composition of the extract by GC/MS and established cymene and cuminaldehyde as major components, and further detected no signs of gross or systemic toxicity. Thus, cumin bioactives can significantly delay and prevent E2-mediated mammary tumorigenesis in a safe and effective manner, and warrant continued efforts to develop these clinically translatable spice bioactives as chemopreventives and therapeutics against BC. 相似文献
ABSTRACTNano-composite polymer gel electrolytes (NPGEs) based on polymer poly(vinylidene fluoride-co-hexafluoropropylene) PVdF-HFP, ionic liquid, 1-butyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide BMIMTFSI, Li-salt along with the addition of SiO2 nanoparticles have been synthesized and characterized by various techniques. Prepared NPGEs show high room temperature ionic conductivity (~10?3 S/cm) and have a wide electrochemical window (ECW) (~3.3–3.5 V). The galvanostatic charge/discharge profile was studied by sandwiching best performing NPGEs between a LiFePO4 cathode and lithium metal anode. The specific discharge capacity of the cell (Li/NPGE/LiFePO4) room temperature at 0.1C rate is found to be 138 mAh/g. 相似文献
Experimental data on the monomer conversion, xm, and the weight average molecular weight, Mw, have been generated under several isothermal and non-isothermal conditions for the polymerization of methyl methacrylate in a rheometer-reactor assembly. The non-isothermal results, in particular, can be used to provide more stringent tests of kinetic models than isothermal data alone. A simple empirical model has been used to describe this system that accounts for the gel (Trommsdorff) and glass effects. The model involves only xm and the temperature, and is quite general. The model parameters are tuned using only three sets of isothermal data. Good agreement is found between the experimental results and model predictions for a whole variety of experimental conditions, including non-isothermal operation and with intermediate addition of initiator. Because of its generality, this model is quite suitable for use for on-line optimizing control as well as for describing industrial reactors. 相似文献
A commonly used energy-efficient nylon 6 reactor is simulated under steady-state conditions. The effects of various operating conditions and parameters, e.g., feed composition, temperature and flow rate, heat transfer coefficients, and reactor dimensions, on the temperature and molecular weight profiles are studied. A temperature maximum is observed in the reactor under usual conditions of operation. The maximum value of the temperature is sensitive to the feed conditions, and one has to ensure that degradation reactions speeded up at high temperatures do not affect product characteristics. The model and the numerical technique used are fairly simple and account for most of the important features of industrial reactors. Hence, these can be used in the development of digital-control algorithms in the future. 相似文献