Impact of Tellurium Precipitates in CdZnTe Substrates on MBE HgCdTe Deposition

State-of-the-art (112)B CdZnTe substrates were examined for near-surface tellurium precipitate-related defects. The Te precipitate density was observed to be fairly uniform throughout the bulk of the wafer, including the near-surface region. After a molecular beam epitaxy (MBE) preparation etch, exposed Te precipitates, small pits, and bumps on the (112)B surface of the CdZnTe wafer were observed. From near-infrared and dark field microscopy, the bumps and small pits on the CdZnTe surface are associated with strings of Te precipitates. Raised bumps are Te precipitates near the surface of the (112)B CdZnTe where the MBE preparation etch has not yet exposed the Te precipitate(s). An exposed Te precipitate sticking above the etched CdZnTe surface plane occurs when the MBE preparation etch rapidly undercuts a Te precipitate. Shallow surface pits are formed when the Te precipitate is completely undercut from the surrounding (112)B surface plane. The Te precipitate that was previously located at the center of the pit is liberated by the MBE preparation etch process.     

Remote sensing and GIS for locating favourable zones of lead-zinc-copper mineralization in Rajpura-Dariba area,Rajasthan, India

This paper reports the results of a pilot study carried out in RajpuraDariba area, Rajasthan, for locating favourable zones of lead-zinc-copper (Pb-Zn-Cu) mineralization using remote sensing, Geographical Information System (GIS) and geostatistical modelling techniques. Remotely sensed data, both aerial and satellite, were used to update the existing geological map. ATLAS GIS software and multivariate geostatistical techniques were used to analyse and integrate different types of geological and geophysical datasets. The Favourability Index (FI) maps prepared during this study show the occurrence of three favourable zones for Pb-Zn-Cu mineralization. They are: (i) around and north of Rawan ka Khera; (ii) isolated spots between Ruppura and Bhupalsagar; and (iii) north of Dhani. Selective geochemical sampling and resistivity profiling carried out in these favourable zones indicated the presence of geochemical anomalies (anomalous concentrations of Zn and Cu) and low/moderate resistivity zones, respectively. Recent drilling carried out by the Department of Mines and Geology (DMG), Rajasthan, at about 2.5 km north of Rawan ka Khera (one of the predicted favourable zones) indicated evidence of Cu mineralization at a depth of about 70 m.     

Strength of lime–fly ash compacts using different curing techniques and gypsum additive

Lime–fly ash mixtures are exploited for the manufacture of fly ash bricks finding applications in load bearing masonry. Lime–pozzolana reactions take place at a slow pace under ambient temperature conditions and hence very long curing durations are required to achieve meaningful strength values. The present investigation examines the improvements in strength development in lime–fly ash compacts through low temperature steam curing and use of additives like gypsum. Results of density–strength–moulding water content relationships, influence of lime–fly ash ratio, steam curing and role of gypsum on strength development, and characteristics of compacted lime–fly ash–gypsum bricks have been discussed. The test results reveal that (a) strength increases with increase in density irrespective of lime content, type of curing and moulding water content, (b) optimum lime–fly ash ratio yielding maximum strength is about 0.75 in the normal curing conditions, (c) 24 h of steam curing (at 80°C) is sufficient to achieve nearly possible maximum strength, (d) optimum gypsum content yielding maximum compressive strength is at 2%, (e) with gypsum additive it is possible to obtain lime–fly ash bricks or blocks having sufficient strength (>10 MPa) at 28 days of normal wet burlap curing.     

Estimation of Melt Pool Dimensions, Thermal Cycle, and Hardness Distribution in the Laser-Engineered Net Shaping Process of Austenitic Stainless Steel

Laser engineered net shaping (LENS) and other similar processes facilitate building of parts with freeform shapes by melting and deposition of metallic powders layer by layer. A-priori estimation of the layerwise variations in peak temperature, build dimension, cooling rate, and mechanical property is requisite for successful application of these processes. We present here an integrated approach to estimate these build attributes. A three-dimensional (3-D) heat transfer analysis based on the finite element method is developed to compute the layerwise variation in thermal cycles and melt pool dimensions in the single-line multilayer wall structure of austenitic stainless steel. The computed values of cooling rates during solidification are used to estimate the layerwise variation in cell spacing of the solidified structure. A Hall–Petch like relation using cell size as the structural parameter is used next to estimate the layerwise hardness distribution. The predicted values of layer widths and build heights have depicted fair agreement with the corresponding measured values in actual deposits. The estimated values of layerwise cell spacing and hardness remain underpredicted and overpredicted, respectively. The slight underprediction of the cell spacing is attributed to the possible overestimation of the cooling rates that may have resulted due to the neglect of convective heat transport within the melt pool. The overprediction of the layerwise hardness is certainly due to the underprediction of corresponding cell spacing. The application of Hall–Petch coefficients, which is strictly valid for wrought and annealed grain structures, to estimate the hardness of as-solidified cellular structures may have also contributed to the overprediction of the layerwise hardness.     

Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy AA2014

Friction stir lap welds were produced in 3 mm thick Alclad sheets of Al alloy 2014-T4 using two different tools (with triangular and threaded taper cylindrical pins). The effects of tool geometry on weld microstructure, lap-shear performance and failure mode were investigated. The pin profile was found to significantly influence the hook geometry, which in turn strongly influenced the joint strength and the failure mode. Welds produced in alloy 2014-T4 Alclad sheets by using triangular and threaded taper cylindrical tools exhibited an average lap-shear failure load of 16.5 and 19.5 kN, respectively, while the average failure load for standard riveted joints was only 3.4 kN. Welds produced in alloy 2014-T6 Alclad sheets and in alloy 2014-T4 bare sheets (i.e., no Alclad) were comparatively evaluated with those produced in alloy 2014-T4 Alclad sheets. While the welds made (with threaded taper cylindrical tool) in T6 and T4 conditions showed very similar lap-shear failure loads, the joint efficiency of the welds made in T6 condition (43%) was considerably lower (because of the higher base material strength) than those made in T4 condition (51%). The Alclad layers were found to present no special problems in friction stir lap welding. Welds made with triangular tool in alloy 2014-T4 Alclad and bare sheets showed very similar lap-shear failure loads. The present work provides some useful insights into the use of friction stir welding for joining Al alloys in lap configuration.     

New correlations for estimation of monthly average daily solar radiation on a horizontal surface using meteorological data

This study deals with the estimation of monthly average daily global solar radiation incident on a horizontal surface at a location using meteorological data for different cities of Andhra Pradesh state. The regression equations of two types of models are developed for various locations of the state having varied climatic regions using measured meteorological parameters obtained from different measuring stations. Parameters such as the latitude and height of the location, maximum and minimum temperature and relative humidity are considered to develop linear and quadratic regression equations to estimate the monthly average daily global radiation. The estimated values are compared with measured data and with other theoretical models in terms of mean percent errors calculated using recognised statistical criteria of MBE, MABE, MPE and RMSE. The proposed quadratic model performs better than the proposed linear models and shows good agreement with the long-term pyranometer data of various locations with a deviation of less than 10%. In comparison with other theoretical models presented so far, the suggested models are expected to perform with a higher degree of accuracy.     

Investigation of Subthreshold Characteristics of Negative Capacitance Single-Active Layer Double-Gate (NC-SALDG) Thin-Film Transistor (TFT)

Silicon - In this paper, for the first time, the performance evaluation of negative capacitance single-active layer double-gate (NC-SALDG) TFT is presented. In the proposed NC-SALDG TFT, amorphous...