Performance of a Binary PPM Ultra-Wideband Communication System with Direct Sequence Spreading for Multiple Access

In this paper, we present an analysis of the BER performance of an ultra-wideband (UWB) system with pulse position modulation (PPM) for data modulation and direct sequence (DS) spreading for multiple access over indoor lognormal fading channels. A rake receiver is used to combine a subset of the resolvable multipath components using the maximal ratio combining technique. Inter-path and multiple-access interferences are modeled and incorporated into the bit-error-rate expressions. The analytical and simulation results allow one to quantify many critical aspects of a DS-PPM UWB system such as the gain of the optimally spaced signaling scheme over the orthogonal signaling scheme, the potential error floor given a specific channel multipath delay spread and the number of interfering users, tolerance of the system to timing jitter, and impact of user codes.     

A multicenter community study on the efficacy of double-fortified salt

BACKGROUND: Iron and iodine deficiencies affect more than 30% of the world's population. Typical Indian diets contain adequate amounts of iron, but the bioavailability is poor. This serious limiting factor is caused by low intake of meat products rich in heme iron and intake of phytates in staple foods in the Indian diet, which inhibits iron absorption. OBJECTIVE: To test the stability of double-fortified salt (DFS) during storage and to assess its efficacy in improving the iron and iodine status of the communities. METHODS: The stability of both iodized salt and DFS during storage for a 2-year period was determined. The bioefficacy of DFS was assessed in communities covering three states of the country for a period of 1 year. This was a multicenter, single-blind trial covering seven clusters. The experimental group used DFS and the control group used iodized salt. The salts were used in all meals prepared for family members, but determination of hemoglobin by the cyanmethemoglobin method was performed in only two or three members per family, and not in children under 10 years of age (n = 393 and 436 in the experimental and control groups, respectively). The family size was usually four or five, with a male: female ratio of 1:1, consisting of two parents with two or three children. Hemoglobin was measured at baseline, 6 months (midpoint), and 12 months (endpoint). Urinary iodine was measured in only one cluster at baseline and endpoint. All the participants were dewormed at baseline, 6 months, and 12 months. RESULTS: The iron and iodine in the DFS were stable during storage for 2 years. Over a period of 1 year, there was an increase of 1.98 g/dL of hemoglobin in the experimental group and 0.77 g/dL of hemoglobin in the control group; the latter increase may have been due to deworming. The median urinary iodine changed from 200 microg/dL at baseline to 205 microg/dL at the end of the study in the experimental group and from 225 microg/dL to 220 microg/dL in the control group. There was a statistically significant (p < .05) improvement in the median urinary iodine status of subjects who were iodine deficient (urinary iodine < 100 microg/L) in both the experimental and the control groups, a result showing that DFS was as efficient as iodized salt in increasing urinary iodine from a deficient to sufficient status. There was a statistically significant increase (p < .05) in hemoglobin in all seven clusters in the experimental group compared with the control. CONCLUSIONS: The iron and iodine in the DFS are stable in storage for 2 years. The DFS has proved beneficial in the delivery of bioavailable iron and iodine.     

Polymer assisted isolation of hydroxyapatite from Thunnus obesus bone

The combination of micro and nanostructured hydroxyapatite (HAp) was isolated from Thunnus obesus bone via thermal calcination method in the presence of polymers such as poly ethylene glycol (PEG), poly (ethylene glycol)-block-poly (propylene glycol)-block-poly (ethylene glycol) (PEG-PPG-PEG) and poly vinyl alcohol (PVA). The thermal stability, crystalline phase, chemical composition and morphology of the derived HAp were characterized by thermal gravimetric analysis, X-ray diffraction analysis, Fourier transform infrared spectroscopy and field emission scanning electron microscopy analysis. The physicochemical characteristic examination revealed that derived HAp was coherent with standard HAp data. Moreover, FE-SEM depicted significant difference in the crystal size of HAp derived with thermal calcination, with and without added polymers. The crystallinity of HAp isolated in the presence of polymer was lower than that obtained in the absence of polymers. The biocompatibility of the derived HAp crystals was checked with MC3T3-E1 osteoblastic cells by MTT assay and Hoechst-33342 staining. The biocompatibility of HAp derived by polymer assisted thermal calcination method revealed that it is less toxic as compared to HAp derived in the absence of polymer. As an inference, polymer assisted thermal calcination derived HAp is good in terms of the presence of combined micro and nanostructured HAp and its low toxicity will bring about new orthopaedic applications.     

Nafion/lead oxide–manganese oxide combined catalyst for use as a highly efficient alkaline air electrode in zinc–air battery

In this study, we report the application of an inexpensive and easily prepared lead oxide–manganese oxide catalyst combined with Nafion (designated as Nf/PbMnO_x) as a highly efficient air-cathode for a zinc–air battery. We verify the mechanistic study of the reduction of O₂ for Nf/PbMnO_x in alkaline aqueous solution using rotating ring/disk electrode voltammetry, and also an electrochemical approach using a wall-jet screen-printed ring disk electrode. The presence of Nf/PbMnO_x shows great catalytic activity for the disproportionation reaction of HO₂⁻ to O₂ and OH⁻ with an overall 4e⁻ reduction of O₂ in the first reduction reaction. The 4e⁻ reduction of O₂ was eventually achieved at the Nf/PbMnO_x through evidence from the slope of Koutecky–Levich plots. With these inherent features, we then fabricated the zinc–air battery with the Nf/PbMnO_x catalyst and examine the performance for a practical application with air cathodes.     

Synthesis and characterization of poly(amideimide)s from 4-(p-carboxyphenoxy)phthalic anhydride and 4-(p-carboxybenzoyl)phthalic anhydride

A series of poly(amideimide)s were prepared by the reaction of two new anhydride acidchloride monomers with aromatic diamines. 4-(p-Carboxyphenoxy)phthalic anhydride was synthesized by nucleophilic displacement reaction of N-methyl-4-nitrophthalimide with p-hydroxybenzoic acid, followed by hydrolysis. The tricarboxylic acid was converted to the corresponding anhydride acidchloride. 4-(p-Carboxybenzoyl)phthalic anhydride was synthesized by Friedel–Craft's acylation of toluene with N-phenylphthalimide-4-carbonylchloride, which was then converted to anhydride acidchloride of 4-(p-carboxybenzoyl)phthalic acid. The monomers were characterized by IR and NMR. Several PAI were prepared by the reaction of these anhydride acidchloride monomers with aromatic diamines. The inherent viscosities of the polymers were in the range of 0.42–0.58 dL/g. All polymers were soluble in polar aprotic solvents. The polymers showed good thermal stability and T_g values were in the range of 226–269 °C. X-Ray diffractograms of polymers indicate amorphous nature of these polymers.     

Oxidative Alkene Cleavage by Chemical and Enzymatic Methods

The cleavage of alkenes to the corresponding carbonyl products is a widely employed method in organic synthesis, especially to introduce oxygen functionalities into molecules, remove protecting groups and tailor large molecules. Chemical methods available for alkene cleavage include, for instance, ozonolysis, several metal‐based variants (KMnO₄, OsO₄, RuO₄, etc.), electrochemical alternatives, singlet oxygen, hypervalent iodine and organic molecules in combination with oxygen. Furthermore, several enzymatic methods for alkene cleavage have been described to establish safe, mild and selective oxidation methods. Various heme and non‐heme iron‐dependent enzymes catalyse the alkene cleavage at ambient temperature and atmospheric pressure in an aqueous buffer, showing good chemo‐ and regioselectivities in selected cases. Quite recently some Cu‐, Mn‐ and Ni‐dependent enzymes have been identified for this reaction. This review gives an overview of the different chemical and enzymatic methods available for the cleavage of alkenes.

     

Microclimatic modeling of the urban thermal environment of Singapore to mitigate urban heat island

This study investigates the urban heat island effect in Singapore and examines the key factors causing this effect. The possibilities of improving heat extraction rate by optimizing air flow in selected hot spots were explored. The effect of building geometry, façade materials and the location of air-conditioning condensers on the outdoor air temperature was explored using computational fluid dynamics (CFD) simulations. It was found that at very low wind speeds, the effect of façade materials and their colours was very significant and the temperature at the middle of a narrow canyon increased up to 2.5 °C with the façade material having lower albedo. It was also found that strategically placing a few high-rise towers will enhance the air flow inside the canyon thereby reducing the air temperature. Adopting an optimum H/W ratio for the canyons increased the velocity by up to 35% and reduced the corresponding temperature by up to 0.7 °C.     

Room temperature amorphous to nanocrystalline transformation in ultra-thin films under tensile stress: an in situ TEM study

The amorphous to crystalline phase transformation process is typically known to take place at very high temperatures and facilitated by very high compressive stresses. In this study, we demonstrate crystallization of amorphous ultra-thin platinum films at room temperature under tensile stresses. Using a micro-electro-mechanical device, we applied up to 3% uniaxial tensile strain in 3-5 nm thick focused ion beam deposited platinum films supported by another 3-5 nm thick amorphous carbon film. The experiments were performed in situ inside a transmission electron microscope to acquire the bright field and selected area diffraction patterns. The platinum films were observed to crystallize irreversibly from an amorphous phase to face-centered cubic nanocrystals with average grain size of about 10 nm. Measurement of crystal spacing from electron diffraction patterns confirms large tensile residual stress in the platinum specimens. We propose that addition of the externally applied stress provides the activation energy needed to nucleate crystallization, while subsequent grain growth takes place through enhanced atomic and vacancy diffusion as an energetically favorable route towards stress relaxation at the nanoscale.     

IP over optical networks: architectural aspects

The Internet transport infrastructure is moving toward a model of high-speed routers interconnected by intelligent optical core networks. A consensus is emerging in the industry on utilizing an IP-centric control plane within optical networks to support dynamic provisioning and restoration of lightpaths. At the same time, there are divergent views on how IP routers must interact with optical core networks to achieve end-to-end connectivity. This article describes the architectural alternatives for interconnecting IP routers over optical networks, considering the routing and signaling issues. Also, the application of IP-based protocols for dynamic provisioning and restoration of lightpaths, as well as the interworking of multivendor optical networks is described