Effect of the exposure angle in the corrosion rate of plain carbon steel in a marine atmosphere

This investigation aims to analyse the effect of the exposure angle on the corrosion rate of mild steel. Test samples were exposed to a marine environment at 0°, 30°, 45° and 90° inclination. To determine the effects of contaminants on the protective characteristics of the rusts, Cl and SO₂ contents in the atmosphere as well as SEM-EDX analyses and polarisation curves on the weathered samples were performed. Results demonstrated that the exposure angle influences the corrosion rate, as also the morphology of the rust, but with no effect on rust composition.     

Tetragonal structure, anionic vacancies and catalytic activity of SO4-ZrO2 catalysts for n-butane isomerization

An assessment of the influence of the crystal structure, surface hydroxylation state and previous oxidation/reduction pretreatments on the activity of sulfate-zirconia catalysts for isomerization of n-butane was performed using crystalline and amorphous zirconia supports. Different sulfation methods were used for the preparation of bulk and supported SO₄²⁻-ZrO₂ with monoclinic, tetragonal and tetragonal+monoclinic structures. Activity was important only for the samples that contained tetragonal crystals. The catalysts prepared from pure monoclinic zirconia showed negligible activity. SO₄²⁻-ZrO₂ catalysts prepared by sulfation of crystalline zirconia displayed sites with lower acidity and cracking activity than those sulfated in the amorphous state. Prereduction of the zirconia samples with H₂ was found to greatly increase the catalytic activity, and a maximum rate was found at a reduction temperature of 550–600 °C, coinciding with a TPR peak supposedly associated with the removal of lattice oxygen and the creation of lattice defects. A weaker dependence of catalytic activity on the density or type of surface OH groups on zirconia (before sulfation) was found in this work.

A model of active site generation was constructed in order to stress the dependence on the crystal structure and crystal defects. Current and previous results suggest that tetragonal structure in active SO₄²⁻-ZrO₂ is a consequence of the stabilization of anionic vacancies in zirconia. Anionic vacancies are in turn supposed to be related to the catalytic activity for n-butane isomerization through the stabilization of electrons from ionized intermediates.     

A 3D analysis of the joint torques developed during driver's ingress–egress motion

Providing an easy ingress–egress (I/E) movement remains a challenge for car designers. I/E has been largely studied in kinematics, but not in dynamics. This study proposes: (1) to evaluate and describe the motor torques developed in the lower limbs and lumbar joints during I/E motions and (2) to analyse the influence of the car geometry and subject anthropometry. An experiment was performed to observe 15 subjects of three anthropometrical groups getting in and out of a car mock-up simulating three different vehicle configurations. Motor torques were extracted using an inverse dynamics analysis. Both ingress and egress motions were primarily characterised by large torques. Overall, the taller a subject and the lower the seat of the vehicle were, the larger the peak torques were. Moreover, peak torques were higher for egress than ingress. These results are discussed in regard to the current knowledge on I/E ergonomics.     

Free fatty acid inhibition of the insulin induction of glucose-6-phosphate dehydrogenase in rat hepatocyte monolayers

Rat hepatocytes in monolayer culture were utilized to determine if the decrease in glucose-6-phosphate dehydrogenase (G6PD) activity resulting from the ingestion of fat can be mimicked by the addition of fatty acids to a chemically, hormonally defined medium. G6PD activity in cultured hepatocytes was induced several-fold by insulin. Dexamethasone or T3 did not amplify the insulin induction of G6PD. Glucose alone increased G6PD activity in cultured hepatocytes from fasted donors by nearly 500%. Insulin in combination with glucose induced G6PD an additional two-fold. The increase in G6PD activity caused by glucose was greater in hepatocytes isolated from 72 hr-fasted rats as compared to fed donor rats. Such a response was reminiscent of the “overshoot” phenomenon in which G6PD activity is induced well above the normal level by fasting-refeeding rats a high glucose diet. Addition of linoleate to the medium resulted in a significant suppression of insulin’s ability to induce G6PD, but linoleate had no effect on the induction of G6PD activity by glucose alone. A shift to the right in the insulin-response curve for the induction of G6PD also was detected for the induction of malic enzyme and acetyl-CoA carboxylase. Arachidonate (0.25 mM) was a significantly more effective inhibitor of the insulin action than linoleate was. Apparently rat hepatocytes in monolayer culture can be utilized as a model to investigate the molecular mechanism by which fatty acids inhibit the production of lipogenic enzymes. In part, this mechanism of fatty acid inhibition involves desensitization of hepatocytes to the lipogenic action of insulin.     

A smartphone-based virtual white cane

The objective of our research was to develop assistive technology for visually impaired people, with a high appreciation for the human potential to achieve, to learn, and to achieve goals. In this document, we describe a virtual white cane made of a combination of a Smartphone and a laser pointer. In our device, the laser pointer beam reflection is captured by the Smartphone camera. The distance from the virtual white cane to the reflection is computed through active triangulation. Then, a personalized vibration, the magnitude of which corresponds to distance, is generated in the Smartphone. In this way, the users receive information that could prevent collisions with obstacles in the environment. Our contributions include the development of a virtual white cane around a Smartphone and other off-the-shelf accessories and a methodology to provide personalized vibratory feedback to the user. Our experiments show that to navigate, our instrument is better option, in terms of travel time, that the use of the hands. However, the travel time is still better using a traditional white cane than our instrument.     

Supported Alumina Members by an in-Situ Sol–Gel Method

Alumina membranes were prepared using a sol–gel process. Thin gel layers were grown onto porous alumina support tubes by using the permeation of water through the tube to control the rate of hydrolysis. Optimum coating conditions were found to be an ASB to 2-propanol volume ratio of 1:25, coating times between 10 and 15 s, and partial drying times between 2.5 and 3 min, depending on whether the water was flowing in the tube or stored in the tube. The coatings remained crack-free and adherent when fired to 800°C.     

Study of hemocompatibility and endothelial cell interaction of tecoflex-based electrospun vascular grafts

Abstract

Ensuring long-term functioning and efficient endothelialization of small diameter vascular grafts (VG) is an urgent task of tissue engineering. A solution may be to use electrospun VGs prepared from blends polyurethane with gelatin and/or bivalirudin. Here, properties of 3D matrices were explored by SEM, contact angle measurements and IR spectroscopy, and their interaction with blood and endothelial cells was studied. Introduction of gelatin into matrices enhanced adhesion and proliferation of endotheliocytes and enabled adhesion of platelets, whereas bivalirudin inhibited platelet adhesion while having no negative effect on the adhesion and proliferation of endothelial cells.     

Lipase PS-catalyzed transesterification of citronellyl butyrate and geranyl caproate: Effect of reaction parameters

Pseudomonas sp. lipase PS was immobilized by adsorption and tested for its ability to catalyze the synthesis of citronellyl butyrate and geranyl caproate by transesterification in n-hexane. The reaction parameters investigated were: enzyme load, effect of substrate concentration, added water, temperature, time course, organic solvent, pH memory, and enzyme reuse. Yields as high as 96 and 99% were obtained for citronellyl butyrate and geranyl caproate, respectively, with 300 units (approx. 15% w/w of reactants) of lipase PS. Increasing amounts of terpene alcohol inhibited lipase activity, while excess acyl donor (triacylglycerol) concentration enhanced ester production. Optimal yields were obtained at temperatures from 30–50°C after 24-h incubation time. Yields of 90 and 99% were obtained for citronellyl and geranyl esters, respectively, with 2% added water. Solvents with log P values ≥ 2.5 showed the highest conversion yields. pH 7 and 6–8 seemed to be ideal for citronellyl butyrate and geraniol caproate, respectively. The lipase remained active after reusing 12 times.     

A biomarker of n−3 compliance in patients taking fish oil for rheumatoid arthritis

Dietary fish oil supplements have been shown to have benefits in rheumatoid arthritis (RA), other inflammatory diseases, and in cardiovascular disease. As with any medical advice, variability will exist with regard to adherence and consequent biochemical or pharmacophysiologic effects. The aim was to explore the utility of plasma phospholipid EPA as a measure of n−3 PUFA intake and response to standardized therapeutic advice given in an outpatient or office practice setting, to increase dietary n−3 PUFA, including a fish oil supplement. Patients with early RA were given verbal and written advice to alter their dietary n−3 PUFA intake, including ingestion of 20 mL of bottled fish oil on juice daily. The advice included instructions to increase n−3 PUFA and to avoid foods rich in n−6 PUFA. Every 3 mon, blood samples were obtained for analysis of plasma phospholipid FA. Plasma phospholipid EPA was used as the primary index of n−3 PUFA intake. A diverse response was seen, with about one-third of patients achieving a substantial elevation of plasma phospholipid EPA over the 12-mon study period. A third had little change, with the remainder achieving intermediate levels. Data obtained longitudinally from individual patients indicated that substantial elevations of EPA (>5% total plasma phospholipid FA) could be maintained for more than 3 yr. Plasma phospholipid EPA is a convenient measure of adherence to advice to take a dietary n−3 PUFA-rich fish oil supplement. This measure may prove a useful adjunct to intention to treat analyses in determining the effect of dietary fish oil supplements on long-term outcomes in arthritis and other chronic inflammatory diseases. It may also provide a guide to the effectiveness of therapeutic and preventive messages designed to increase n−3 PUFA intake.     

The influence of poly(3,4-ethylenedioxythiophene) modification on the transport properties and fuel cell performance of Nafion-117 membranes

Nafion-117/PEDOT composite membranes were synthesized by in situ chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using ammonium persulfate as an oxidant. The polymerization of EDOT in Nafion membranes for various EDOT/oxidant treatment sequences was studied for the first time. PEDOT introduction leads to a slight decrease in both the ion-exchange capacity and water uptake of the composite membranes, as well as to an increase in cationic transport. Membranes initially treated with an oxidant exhibit better conductivity and lower hydrogen permeability. The effect of both modification of Nafion-117 membranes by PEDOT and hot-pressing of hydrogen-oxygen membrane-electrode assemblies (MEAs) on the performance of proton-exchange membrane fuel cells was studied. The maximum power density of the fabricated MEAs increases 1.5-fold: from 510 (for a pristine Nafion-117 membrane) to 810 mW cm⁻² (for a membrane modified by PEDOT). The current density at a voltage of 0.4 V reaches 1248 and 2246 mA cm⁻², respectively.