Effect of the exposure angle in the corrosion rate of plain carbon steel in a marine atmosphere

This investigation aims to analyse the effect of the exposure angle on the corrosion rate of mild steel. Test samples were exposed to a marine environment at 0°, 30°, 45° and 90° inclination. To determine the effects of contaminants on the protective characteristics of the rusts, Cl and SO₂ contents in the atmosphere as well as SEM-EDX analyses and polarisation curves on the weathered samples were performed. Results demonstrated that the exposure angle influences the corrosion rate, as also the morphology of the rust, but with no effect on rust composition.     

Tetragonal structure, anionic vacancies and catalytic activity of SO4-ZrO2 catalysts for n-butane isomerization

An assessment of the influence of the crystal structure, surface hydroxylation state and previous oxidation/reduction pretreatments on the activity of sulfate-zirconia catalysts for isomerization of n-butane was performed using crystalline and amorphous zirconia supports. Different sulfation methods were used for the preparation of bulk and supported SO₄²⁻-ZrO₂ with monoclinic, tetragonal and tetragonal+monoclinic structures. Activity was important only for the samples that contained tetragonal crystals. The catalysts prepared from pure monoclinic zirconia showed negligible activity. SO₄²⁻-ZrO₂ catalysts prepared by sulfation of crystalline zirconia displayed sites with lower acidity and cracking activity than those sulfated in the amorphous state. Prereduction of the zirconia samples with H₂ was found to greatly increase the catalytic activity, and a maximum rate was found at a reduction temperature of 550–600 °C, coinciding with a TPR peak supposedly associated with the removal of lattice oxygen and the creation of lattice defects. A weaker dependence of catalytic activity on the density or type of surface OH groups on zirconia (before sulfation) was found in this work.

A model of active site generation was constructed in order to stress the dependence on the crystal structure and crystal defects. Current and previous results suggest that tetragonal structure in active SO₄²⁻-ZrO₂ is a consequence of the stabilization of anionic vacancies in zirconia. Anionic vacancies are in turn supposed to be related to the catalytic activity for n-butane isomerization through the stabilization of electrons from ionized intermediates.     

A 3D analysis of the joint torques developed during driver's ingress–egress motion

Providing an easy ingress–egress (I/E) movement remains a challenge for car designers. I/E has been largely studied in kinematics, but not in dynamics. This study proposes: (1) to evaluate and describe the motor torques developed in the lower limbs and lumbar joints during I/E motions and (2) to analyse the influence of the car geometry and subject anthropometry. An experiment was performed to observe 15 subjects of three anthropometrical groups getting in and out of a car mock-up simulating three different vehicle configurations. Motor torques were extracted using an inverse dynamics analysis. Both ingress and egress motions were primarily characterised by large torques. Overall, the taller a subject and the lower the seat of the vehicle were, the larger the peak torques were. Moreover, peak torques were higher for egress than ingress. These results are discussed in regard to the current knowledge on I/E ergonomics.     

Sorption of Aniline by Montmorillonite

Sorption of aniline by montmorillonite was studied by infra-red, X-ray diffraction and differential thermal analysis methods. The amount of aniline sorbed and the type of bonding depend upon the interlayer cations: anilinium, H⁺- and Al³⁺- give anilinium aniline ions, NH₄⁴-ammonium aniline ions, alkalis and alkaline earths except Cs are bonded to aniline through water bridges and transition metal cations are coordinated to aniline partly directly and partly through water bridges. Sorption does not occur in the complete absence of water.     

Free fatty acid inhibition of the insulin induction of glucose-6-phosphate dehydrogenase in rat hepatocyte monolayers

Rat hepatocytes in monolayer culture were utilized to determine if the decrease in glucose-6-phosphate dehydrogenase (G6PD) activity resulting from the ingestion of fat can be mimicked by the addition of fatty acids to a chemically, hormonally defined medium. G6PD activity in cultured hepatocytes was induced several-fold by insulin. Dexamethasone or T3 did not amplify the insulin induction of G6PD. Glucose alone increased G6PD activity in cultured hepatocytes from fasted donors by nearly 500%. Insulin in combination with glucose induced G6PD an additional two-fold. The increase in G6PD activity caused by glucose was greater in hepatocytes isolated from 72 hr-fasted rats as compared to fed donor rats. Such a response was reminiscent of the “overshoot” phenomenon in which G6PD activity is induced well above the normal level by fasting-refeeding rats a high glucose diet. Addition of linoleate to the medium resulted in a significant suppression of insulin’s ability to induce G6PD, but linoleate had no effect on the induction of G6PD activity by glucose alone. A shift to the right in the insulin-response curve for the induction of G6PD also was detected for the induction of malic enzyme and acetyl-CoA carboxylase. Arachidonate (0.25 mM) was a significantly more effective inhibitor of the insulin action than linoleate was. Apparently rat hepatocytes in monolayer culture can be utilized as a model to investigate the molecular mechanism by which fatty acids inhibit the production of lipogenic enzymes. In part, this mechanism of fatty acid inhibition involves desensitization of hepatocytes to the lipogenic action of insulin.     

A smartphone-based virtual white cane

The objective of our research was to develop assistive technology for visually impaired people, with a high appreciation for the human potential to achieve, to learn, and to achieve goals. In this document, we describe a virtual white cane made of a combination of a Smartphone and a laser pointer. In our device, the laser pointer beam reflection is captured by the Smartphone camera. The distance from the virtual white cane to the reflection is computed through active triangulation. Then, a personalized vibration, the magnitude of which corresponds to distance, is generated in the Smartphone. In this way, the users receive information that could prevent collisions with obstacles in the environment. Our contributions include the development of a virtual white cane around a Smartphone and other off-the-shelf accessories and a methodology to provide personalized vibratory feedback to the user. Our experiments show that to navigate, our instrument is better option, in terms of travel time, that the use of the hands. However, the travel time is still better using a traditional white cane than our instrument.     

Designing smarter touch-based interfaces for educational contexts

In next-generation classrooms and educational environments, interactive technologies such as surface computing, natural gesture interfaces, and mobile devices will enable new means of motivating and engaging students in active learning. Our foundational studies provide a corpus of over 10,000 touch interactions and nearly 7,000 gestures collected from nearly 70 adults and children aged 7 years and above, which can help us understand the characteristics of children’s interactions in these modalities and how they differ from adults. Based on these data, we identify key design and implementation challenges of supporting children’s touch and gesture interactions, and we suggest ways to address them. For example, we find children have more trouble successfully acquiring onscreen targets and having their gestures recognized than do adults, especially the youngest age group (7–10 years old). The contributions of this work provide a foundation that will enable touch-based interactive educational apps that increase student success.     

Supported Alumina Members by an in-Situ Sol–Gel Method

Alumina membranes were prepared using a sol–gel process. Thin gel layers were grown onto porous alumina support tubes by using the permeation of water through the tube to control the rate of hydrolysis. Optimum coating conditions were found to be an ASB to 2-propanol volume ratio of 1:25, coating times between 10 and 15 s, and partial drying times between 2.5 and 3 min, depending on whether the water was flowing in the tube or stored in the tube. The coatings remained crack-free and adherent when fired to 800°C.