A smartphone-based virtual white cane

The objective of our research was to develop assistive technology for visually impaired people, with a high appreciation for the human potential to achieve, to learn, and to achieve goals. In this document, we describe a virtual white cane made of a combination of a Smartphone and a laser pointer. In our device, the laser pointer beam reflection is captured by the Smartphone camera. The distance from the virtual white cane to the reflection is computed through active triangulation. Then, a personalized vibration, the magnitude of which corresponds to distance, is generated in the Smartphone. In this way, the users receive information that could prevent collisions with obstacles in the environment. Our contributions include the development of a virtual white cane around a Smartphone and other off-the-shelf accessories and a methodology to provide personalized vibratory feedback to the user. Our experiments show that to navigate, our instrument is better option, in terms of travel time, that the use of the hands. However, the travel time is still better using a traditional white cane than our instrument.     

Study of hemocompatibility and endothelial cell interaction of tecoflex-based electrospun vascular grafts

Abstract

Ensuring long-term functioning and efficient endothelialization of small diameter vascular grafts (VG) is an urgent task of tissue engineering. A solution may be to use electrospun VGs prepared from blends polyurethane with gelatin and/or bivalirudin. Here, properties of 3D matrices were explored by SEM, contact angle measurements and IR spectroscopy, and their interaction with blood and endothelial cells was studied. Introduction of gelatin into matrices enhanced adhesion and proliferation of endotheliocytes and enabled adhesion of platelets, whereas bivalirudin inhibited platelet adhesion while having no negative effect on the adhesion and proliferation of endothelial cells.     

Enhancing thermal and dynamic-mechanical properties of epoxy reinforced by amino-functionalized microcrystalline cellulose

In this study, microcrystalline cellulose (MCC) was chemically modified with 3-(aminopropyl)triethoxysilane and added to epoxy to improve chemical, thermal and dynamic-mechanical characteristics of the composites. The composites were manufactured aided by sonication with 1.0%, 2.5%, or 5.0% wt/wt of untreated MCC or amino-functionalized MCC (MCC-Si). The epoxy/MCC-Si composites showed a decrease in the ─OH band by Fourier-transform infrared spectroscopy, and X-ray diffraction analysis indicated better dispersion. The incorporation of MCC-Si in epoxy resin decreased the heat of reaction, increased activation energy values (E_a) and pre-exponential factor (A), and did not affect thermal degradation. All conversion degree (α) versus temperature curves for the composites showed a sigmoidal shape. MCC-Si composites showed better dynamic-mechanical properties than the MCC counterparts, and the functionalization effect was evidenced in storage modulus (E') and loss modulus (E"). At 2.5% wt/wt of MCC-Si content an increase of 119% in E' at the glassy region, 127% in E' at the rubbery region and 173% in E" was observed compared to the neat resin, whereas the T_g barely changed among samples. Good adhesion between the amino-functionalized MCC and the epoxy matrix was observed at the fracture surface, evidencing that surface modification of MCC improves their chemical interaction.     

The influence of poly(3,4-ethylenedioxythiophene) modification on the transport properties and fuel cell performance of Nafion-117 membranes

Nafion-117/PEDOT composite membranes were synthesized by in situ chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using ammonium persulfate as an oxidant. The polymerization of EDOT in Nafion membranes for various EDOT/oxidant treatment sequences was studied for the first time. PEDOT introduction leads to a slight decrease in both the ion-exchange capacity and water uptake of the composite membranes, as well as to an increase in cationic transport. Membranes initially treated with an oxidant exhibit better conductivity and lower hydrogen permeability. The effect of both modification of Nafion-117 membranes by PEDOT and hot-pressing of hydrogen-oxygen membrane-electrode assemblies (MEAs) on the performance of proton-exchange membrane fuel cells was studied. The maximum power density of the fabricated MEAs increases 1.5-fold: from 510 (for a pristine Nafion-117 membrane) to 810 mW cm⁻² (for a membrane modified by PEDOT). The current density at a voltage of 0.4 V reaches 1248 and 2246 mA cm⁻², respectively.     

Effect of the marine environment on reinforced concrete durability in Iberoamerican countries: DURACON project/CYTED

This work presents some of the results from the project: “Effect of the environment on reinforcement durability” (DURACON) in its first two-years period, which investigates the influence of urban and marine meteorochemical parameters on the performance of reinforced concrete structures. The results presented in this investigation are from 21 marine test sites only (no urban environments are included), distributed among 11 countries (Argentina, Bolivia, Brazil, Chile, Colombia, Costa Rica, Mexico, Spain, Uruguay, Portugal and Venezuela). The environment was evaluated using ISO Standard 9223 and the concrete was characterized by measuring compressive strength, elastic modulus, total and effective porosity, chloride permeability according to ASTM standards, as well as the effective porosity and resistance to water absorption using the Fagerlund method. To that effect, concrete specimens (with and without reinforcement) were prepared for electrochemical and physical/mechanical/chemical tests using the existing materials in each participating country, following strict procedures which enabled the preparation of similar concrete samples. Two water/cement (w/c) ratios (0.45 and 0.65) were selected, where the concrete with 0.45 w/c ratio had to have a minimum cement content of 400 kg/m³ and the one with 0.65 w/c ratio a compressive strength of 210 kg/cm². Type I Portland cement, siliceous sand, and crushed rock as coarse aggregates (13-mm maximum nominal size) were used. After a one-year exposure, the results of the corrosion potentiality and probability analysis of the reinforcement in the different test stations showed that, for marine atmospheres, the most aggressive environment to induce steel corrosion was at Portugal’s Cabo Raso station, and the least aggressive one was at Chile’s Valparaíso station. These results are comparable with the ones found using electrochemical measurements, after a two-year exposure.     

Small‐signal and noise modeling of class of HEMTs using knowledge‐based artificial neural networks

In this article, the neural network approach is exploited for development of bias‐dependent small‐signal and noise models of a class of microwave field effect transistor (FETs) made in the same technology but differing in the gate width. The prior knowledge neural approach is applied. Introducing gate width at the input of proposed neural networks, as well as the S/noise parameters of a device that belongs to the same class as the modeled device representing the prior knowledge, leads to very accurate scattering and noise parameters' modeling, as exemplified by modeling of class of pseudomorphic high electron mobility transistor (pHEMT) devices. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Large, huge or gigantic? Identifying and encoding intensity relations among adjectives in WordNet

We propose a new semantic relation for gradable adjectives in WordNet, which enriches the present, vague, similar relation with information on the degree or intensity with which different adjectives express a shared attribute. Using lexical-semantic patterns, we mine the Web for evidence of the relative strength of adjectives like “large”, “huge” and “gigantic” with respect to their attribute (“size”). The pairwise orderings we derive allow us to construct scales on which the adjectives are located. To represent the intensity relation among gradable adjectives in WordNet, we combine ordered scales with the current WordNet dumbbells based on the relation between a pair of central adjectives and a group of undifferentiated semantically similar adjectives. A new intensity relation links the adjectives in the dumbbells and their concurrent representation on scales. Besides capturing the semantics of gradable adjectives in a way that is both intuitively clear as well as consistent with corpus data, the introduction of an intensity relation would potentially result in several specific benefits for NLP.     

Hybrid Nanoscopy of Hybrid Nanomaterials

The combination of complementary techniques to characterize materials at the nanoscale is crucial to gain a more complete picture of their structure, a key step to design and fabricate new materials with improved properties and diverse functions. Here it is shown that correlative atomic force microscopy (AFM) and localization‐based super‐resolution microscopy is a useful tool that provides insight into the structure and emissive properties of fluorescent β‐lactoglobulin (βLG) amyloid‐like fibrils. These hybrid materials are made by functionalization of βLG with organic fluorophores and quantum dots, the latter being relevant for the production of 1D inorganic nanostructures templated by self‐assembling peptides. Simultaneous functionalization of βLG fibers by QD655 and QD525 allows for correlative AFM and two‐color super‐resolution fluorescence imaging of these hybrid materials. These experiments allow the combination of information about the topography and number of filaments that compose a fibril, as well as the emissive properties and nanoscale spatial distribution of the attached fluorophores. This study represents an important step forward in the characterization of multifunctionalized hybrid materials, a key challenge in nanoscience.