Gold nanoshell density variation with laser power for induced hyperthermia

The thermal profile effects of nanoshell density, laser power, and laser arrangement are presented for ideal cases of nanoshell-assisted photothermal therapy. A one-dimensional thermal model utilizing the P₁ approximation is used to simulate the penetration of laser radiation and subsequent heating of 1-cm slabs of nanoshell-embedded tissue exposed to a 633-nm collimated light source. It is shown that adding too many nanoshells or increasing power can cause overheating in the entry region while leaving the rear region heated only by conduction, producing an undesirable temperature differential. An opposing dual-laser approach is presented that mitigates this issue.     

Modelling diffusion and adsorption of As species in Fe/GAC adsorbent beds

BACKGROUND: Arsenic decontamination of drinking water by adsorption is a simple and robust operation. When designing packed bed adsorbers for arsenic, the main problems are the slow diffusion kinetics of As in microporous media and the lack of simple equations for predicting the performance of the equipment. Commercial iron‐doped granular activated carbon adsorbents (Fe/GAC) for groundwater arsenic abatement were studied in this work. Basic parameters for arsenate (As^V) adsorption were measured and their performance at larger scale was simulated with an approximate analytical model. RESULTS: In the 0–300 µg_As L^?1 range, the As^V adsorption isotherm on Fe/GAC was found to be approximately linear. Assuming Henry's law for adsorption and homogeneous surface diffusion with constant diffusivity for intrapellet mass transfer, an approximate model for flow and adsorption of arsenate inside packed bed adsorbers was developed, and reduced to an analytic compact solution using the quasi‐lognormal distribution (Q‐LND) approximation. The use of this model with fitted and reported parameters enabled the approximate simulation of industrial adsorbers and home point‐of‐use filters. Results show that industrial adsorbers meet the breakthrough condition with incomplete utilization of the adsorbent unless convenient process configurations are used. In point‐of‐use systems with short residence times intraparticle diffusion would drastically reduce the adsorbent performance. CONCLUSION: Assuming linear adsorption of As^V over Fe/GAC, an analytical approximate solution for flow and adsorption in packed beds can be obtained. The model seems to represent correctly the main features of industrial and home filters, however, more experimental data is necessary for scale‐up purposes. Copyright © 2011 Society of Chemical Industry     

Neural approach for temperature‐dependent modeling of GaN HEMTs

Gallium nitride high electron‐mobility transistors have gained much interest for high‐power and high‐temperature applications at high frequencies. Therefore, there is a need to have the dependence on the temperature included in their models. To meet this challenge, the present study presents a neural approach for extracting a multi‐bias model of a gallium nitride high electron‐mobility transistors including the dependence on the ambient temperature. Accuracy of the developed model is verified by comparing modeling results with measurements. Copyright © 2014 John Wiley & Sons, Ltd.     

Polyurethanes based on 2,2‐Dinitropropane‐1,3‐diol and 2,2‐bis(azidomethyl)propane‐1,3‐diol as potential energetic binders

On the base of 2,2‐bis(azidomethyl)propane‐1,3‐diol (BAMP) and 2,2‐dinitropropane‐1,3‐diol (DNPD) four different polyurethanes were synthesized in a polyaddition reaction using hexamethylene diisocyanate (HMDI) and diisocyanato ethane (DIE). The obtained prepolymers were mainly characterized using vibrational spectroscopy (IR) and elemental analysis. For determination of low and high temperature behavior, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used. Investigations concerning friction and impact sensitivities were carried out using a BAM drop hammer and friction tester. The energetic properties of the polymers were determined using bomb calorimetric measurements and calculated with the EXPLO5 V6.02 computer code. The obtained values were compared with the glycidyl azide polymer (GAP). The compounds turned out to be insensitive toward friction (>360 N) and less sensitive toward impact (40 J). The good physical stabilities, along with their sufficient thermal stability (170–210 °C) and moderate energetic properties renders these polymers into potential compounds for applications as binders in energetic formul;ations. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43991.     

Interleukin‐4‐Clicked Surfaces Drive M2 Macrophage Polarization

Driving macrophage (M?) polarization into the M2 phenotype provides potential against inflammatory diseases. Interleukin‐4 (IL‐4) promotes polarization into the M2‐M? phenotype, but its systemic use is constrained by dose‐limiting toxicity. Consequently, we developed IL‐4‐decorated surfaces aiming at sustained and localized activity. IL‐4 muteins were generated by genetic code expansion; Lys42 was replaced by unnatural amino acids (uAAs). Both muteins showed cell‐stimulation ability and binding affinity to IL4Rα similar to those of wt‐IL‐4. Copper‐catalyzed (CuAAC) and copper‐free strain‐promoted (SPAAC) 1,3‐dipolar azide–alkyne cycloadditions were used to site‐selectively anchor IL‐4 to agarose surfaces. These surfaces had sustained IL‐4 activity, as demonstrated by TF‐1 cell proliferation and M2, but not M1, polarization of M‐CSF‐generated human M?. The approach provides a blueprint for the engineering of cytokine‐activated surfaces profiled for sustained and spatially controlled activity.     

Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells

Thin‐film solar cells consisting of earth‐abundant and non‐toxic materials were made from pulsed chemical vapor deposition (pulsed‐CVD) of SnS as the p‐type absorber layer and atomic layer deposition (ALD) of Zn(O,S) as the n‐type buffer layer. The effects of deposition temperature and annealing conditions of the SnS absorber layer were studied for solar cells with a structure of Mo/SnS/Zn(O,S)/ZnO/ITO. Solar cells were further optimized by varying the stoichiometry of Zn(O,S) and the annealing conditions of SnS. Post‐deposition annealing in pure hydrogen sulfide improved crystallinity and increased the carrier mobility by one order of magnitude, and a power conversion efficiency up to 2.9% was achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Analysis of a 26 756 bp segment from the left arm of yeast chromosome IV

The nucleotide sequence of a 26·7 kb DNA segment from the left arm of Saccharomyces cerevisiae chromosome IV is presented. An analysis of this segment revealed 11 open reading frames (ORFs) longer than 300 bp and one split gene. These ORFs include the genes encoding the large subunit of RNA polymerase II, the biotin apo-protein ligase, an ADP-ribosylation factor (ARF 2), the ‘L35’-ribosomal protein, a rho GDP dissociation factor, and the sequence encoding the protein phosphatase 2A. Further sequence analysis revealed a short ORF encoding the ribosomal protein YL41B, an intron in a 5′ untranslated region and an extended homology with another cosmid (X83276) located on the same chromosome. The potential biological relevance of these findings is discussed. The sequence was submitted to the EMBL database under Accession Number X96876.     

Investigation of Chemical Constituents of Eranthis longistipitata (Ranunculaceae): Coumarins and Furochromones

Aqueous-ethanol extracts (70%) from the leaves of Eranthis longistipitata Regel. (Ranunculaceae Juss.)—collected from natural populations of Kyrgyzstan—were studied by liquid chromatography with high-resolution mass spectrometry (LC-HRMS). There was no variation of the metabolic profiles among plants that were collected from different populations. More than 160 compounds were found in the leaves, of which 72 were identified to the class level and 58 to the individual-compound level. The class of flavonoids proved to be the most widely represented (19 compounds), including six aglycones [quercetin, kaempferol, aromadendrin, 6-methoxytaxifolin, phloretin, and (+)-catechin] and mono- and diglycosides (the other 13 compounds). In the analyzed samples of E. longistipitata, 14 fatty acid–related compounds were identified, but coumarins and furochromones that were found in E. longistipitata were the most interesting result; furochromones khelloside, khellin, visnagin, and cimifugin were found in E. longistipitata for the first time. Coumarins 5,7-dihydroxy-4-methylcoumarin, scoparone, fraxetin, and luvangetin and furochromones methoxsalen, 5-O-methylvisammioside, and visamminol-3′-O-glucoside were detected for the first time in the genus Eranthis Salisb. For all the above compounds, the structural formulas are given. Furthermore, detailed information (with structural formulas) is provided on the diversity of chromones and furochromones in other representatives of Eranthis. The presence of chromones in plants of the genus Eranthis confirms its closeness to the genus Actaea L. because chromones are synthesized by normal physiological processes only in these members of the Ranunculaceae family.     

Upregulation of Cathepsin X in Glioblastoma: Interplay with γ-Enolase and the Effects of Selective Cathepsin X Inhibitors

Glioblastoma (GBM) is the most common and deadly primary brain tumor in adults. Understanding GBM pathobiology and discovering novel therapeutic targets are critical to finding efficient treatments. Upregulation of the lysosomal cysteine carboxypeptidase cathepsin X has been linked to immune dysfunction and neurodegenerative diseases, but its role in cancer and particularly in GBM progression in patients is unknown. In this study, cathepsin X expression and activity were found to be upregulated in human GBM tissues compared to low-grade gliomas and nontumor brain tissues. Cathepsin X was localized in GBM cells as well as in tumor-associated macrophages and microglia. Subsequently, potent irreversible (AMS36) and reversible (Z7) selective cathepsin X inhibitors were tested in vitro. Selective cathepsin X inhibitors decreased the viability of patient-derived GBM cells as well as macrophages and microglia that were cultured in conditioned media of GBM cells. We next examined the expression pattern of neuron-specific enzyme γ-enolase, which is the target of cathepsin X. We found that there was a correlation between high proteolytic activity of cathepsin X and C-terminal cleavage of γ-enolase and that cathepsin X and γ-enolase were colocalized in GBM tissues, preferentially in GBM-associated macrophages and microglia. Taken together, our results on patient-derived material suggest that cathepsin X is involved in GBM progression and is a potential target for therapeutic approaches against GBM.