Microstructure,mechanical properties,and corrosion resistance of Ti-20Zr alloy in undoped and NaF doped artificial saliva

The corrosion behavior of a new, advanced Ti-20Zr alloy with α+β microstructure (determined by optical microscopy, XRD, and SEM) and very good mechanical properties (obtained from the stress-strain curve) is studied in this paper. The composition of the alloy native passive film was determined from a XPS analysis and the long-term corrosion resistance in undoped and doped states with 0.05M NaF artificial Carter-Brugirard saliva of different pH values, simulating the severe functional conditions of a dental implant, was analyzed by electrochemical methods. This alloy possesses an advantageous balance between good mechanical resistance and plasticity and Young’s modulus and exhibits more favorable electrochemical parameters and corrosion resistance than CP Ti due to its more resistant passive layer containing Ti₂O₃, TiO₂, and ZrO₂ protective oxides. After 1000 h of immersion in saliva, the protective properties of the alloy were enhanced due to the deposited surface layer that incorporated protective phosphates (shown by SEM and XPS).     

Furfurals removal from roasted coffee powder by vacuum treatment

The possibility of removing 5-hydroxymethylfurfural (HMF) and furfural from roasted coffee by application of vacuum treatments was studied. In particular, different combinations of pressure and time were used. Results showed that the vacuum treatment was ineffective in removing HMF and furfural from anhydrous (commercial) coffee powder, while it proved effective if applied to previously hydrated samples. Besides, the hydration step alone was responsible for furfurals removal, although prolonged times were needed. By applying a hydration step up to a_w 0.7, followed by a vacuum treatment at 2.7 kPa and 60 °C for 10 min, 20% and 100% HMF and furfural removals were achieved, respectively. These differences in the percentages of HMF and furfural removal can be attributed to differences in the chemical and physical properties of the two molecules. However, the vacuum treatments caused a significant decrease in the coffee headspace total volatiles that in turn was responsible for a lower odour intensity of the samples. Therefore further studies are needed to reveal process conditions able to minimise the loss of sensory properties, making this technology a reliable strategy to mitigate the furfural contents in coffee.     

New Linkage with Linear Actuator for Tracking PV Systems with Large Angular Stroke

This paper focuses on the development of an optimized photovoltaic tracking system involving low-cost, relative simple mechanisms, with linear actuators able to insure strokes comparable with those resulted when using gear rotary actuators. Starting with a rhombus linkage, with a linear actuator on the diagonal used for the elevation motion till 90°, a new performance solution is generated. This new linkage allows large angular strokes by using an asymmetric rhombus and an eccentrically positioned linear ac...     

Field evidence of biodegradation of N-Nitrosodimethylamine (NDMA) in groundwater with incidental and active recycled water recharge

Biodegradation of N-Nitrosodimethylamine (NDMA) has been found through laboratory incubation in unsaturated and saturated soil samples under both aerobic and anaerobic conditions. However, direct field evidence of in situ biodegradation in groundwater is very limited. This research aimed to evaluate biodegradation of NDMA in a large-scale groundwater system receiving recycled water as incidental and active recharge. NDMA concentrations in 32 monitoring and production wells with different screen intervals were monitored over a period of seven years. Groundwater monitoring was used to characterize changes in the magnitude and extent of NDMA in groundwater in response to seasonal hydrogeologic conditions and, more importantly, to significant concentration variations in effluent from water reclamation plants (associated with treatment-process changes). Extensive monitoring of NDMA concentrations and flow rates at effluent discharge locations and surface-water stations was also conducted to reasonably estimate mass loading through unlined river reaches to underlying groundwater. Monitoring results indicate that significant biodegradation of NDMA occurred in groundwater, accounting for an estimated 90% mass reduction over the seven-year monitoring period. In addition, a discrete effluent-discharge and groundwater-extraction event was extensively monitored in a well-characterized, localized groundwater subsystem for 626 days. Analysis of the associated NDMA fate and transport in the subsystem indicated that an estimated 80% of the recharged mass was biodegraded. The observed field evidence of NDMA biodegradation is supported by groundwater transport modeling accounting for various dilution mechanisms and first-order decay for biodegradation, and by a previous laboratory study on soil samples collected from the study site [Bradley, P.M., Carr, S.A., Baird, R.B., Chapelle, F.H., 2005. Biodegradation of N-Nitrosodimethylamine in soil from a water reclamation facility. Bioremediat. J. 9 (2), 115-120.].     

Statistical optimization of desugarization process parameters of liquid whole egg using response surface methodology

The glucose is considered to affect the quality of the dried egg products; therefore the statistical optimization of desugarization process parameters of Liquid whole egg (LWE) was carried out in this study. The fermentation of Liquid whole egg (LWE) was done using compressed baker’s yeast. A polynomial model was regressed between reducing sugar & desugarization conditions. The coefficient of determination (R²) of 0.998 (P < 0.0001) for the regressed model indicated about the adequacy of the model, which implies the model was significant to predict reducing sugar content at different fermentation conditions. Optimum conditions for complete desugarization of Liquid whole egg (LWE) were found to be time 6.49 h, temperature 28 °C, pH 6.40 and yeast concentration 3.8 g/L and confirmed by conducting actual experiments at these conditions.     

Synthesis of new silicas with high stable and large mesopores and macropores for biocatalysis applications

Monomodal or bimodal porous silicas with large mesopores, constituted by particles or having a monolithic (block type) morphology, respectively, are synthesized using sodium silicate as siliceous species source, cetyltrimethylammonium bromide (CTAB) as pore template and ethyl acetate (EtAc) as pH modifier. The monomodal porosity is represented by 20–30 nm pores and the bimodal one by these pores and also macropores. These characteristics are modulated in function of the CTAB and EtAc concentrations as well as the pH and hydrothermal treatment. The role of these reagents upon the porosity is rationalized. The presence of high CTAB concentration and a rather low pH decreasing rate (function of EtAc concentration and hydrothermal treatment) are essential for having the already known bimodal mesoporous silicas (BMS). On the contrary a rather high pH decreasing rate promotes the formation of the new bimodal mesoporous–macroporous silicas (BMMS) synthesized in this work, where the EtAc also plays the role of emulsion forming agent. The hydrolytic stability of the synthesized silica under aqueous conditions, at different pH values, makes these silicas good candidates for application in different areas of catalysis, especially in the enzymatic one.     

Projecting demand and supply of forest biomass for heating in Norway

This paper assesses the increase in demand and supply for forest biomass for heating in Norway in 2020. By then there is a political aim to double the national production of bioenergy from the level in 2008. The competitiveness of woody biomass in central and district heating is analyzed in a model selecting the least-cost heating technology and scale in municipalities given a set of constraints and under different fuels price scenarios. The supply of forest biomass from roundwood is estimated based on data of forest inventories combined with elasticities regarding price and standing volumes. The supply of biomass from harvesting residues is estimated in an engineering approach based on data from the national forest inventories and roundwood harvest. The results show how the production of bioenergy is affected by changes in energy prices and support schemes for bioenergy. One conclusion from the analyses is that the government target of 14 TWh more bioenergy by 2020 is not likely to be met by current technologies and policy incentives. The contribution of the analysis is the detailed presentation of the heat market potentials and technology choices combined with supply functions for both roundwood and harvesting residues.     

Isolation of red wine components with anti-adhesion and anti-biofilm activity against Streptococcus mutans

Red wine is a widely consumed beverage with multiple beneficial effects on human health. In the present paper, the anticaries properties of red wine were studied in vitro and ex vivo. Our in vitro findings shows that dealcoholised red wine, besides exerting antibacterial activity, strongly interferes with Streptococcus mutans adhesion to saliva-coated hydroxyapatite (sHA) beads, promotes its detachment from sHA, and powerfully inhibits in vitro biofilm formation. The main components responsible for such activities were found to be proanthocyanidins. The ability of red wine to inhibit ex vivoS. mutans biofilm formation on the occlusal surface of natural human teeth also was demonstrated.