High value polyurethane resins from rubber seed oil

Rubber seed oil having high free fatty acid content and high unsaturation was used to obtain high quality polyurethane resins through epoxidation and ring opening with methanol and free fatty acids. Two polyols prepared with free fatty acids and without were cured with modified methylene diphenyl diisocyanate to obtain strong, high modulus glassy polyurethanes. The effect of structure on thermal and mechanical properties was analyzed. This showed that the polyol with free fatty acid utilized to obtain a branched structure gave superior crosslinking density and mechanical properties. © 2016 Society of Chemical Industry     

Influence of high power ultrasound on physical–chemical properties of polypropylene films aimed for food packaging: barrier and contact angle features

Investigation was focused on the impact of high power ultrasound (HPUS), also called thermosonication, on the oxygen permeation properties (permeability, solubility and diffusion coefficients) of barrier films aimed for food packaging. For this purpose, biaxially oriented polypropylene (BOPP) coated with acrylic/polyvinylidene chloride (BOPPAcPVDC) and biaxially oriented coextruded polypropylene (BOPPcoex) were used. The physical–chemical profile of the samples was determined using goniometry. There is a significant impact only of extreme HPUS conditions (the longest time and the highest amplitude) on the permeability, solubility and diffusion coefficients of oxygen through the BOPP films. The highest influence on the oxygen permeability in both investigated BOPP samples involved an HPUS with an amplitude of 100% during a 6 min treatment. However, BOPP samples showed different sensitivities at lower HPUS treatments. © 2017 Society of Chemical Industry     

Development of green extraction process to produce antioxidant-rich extracts from purple coneflower

The present study was conducted to develop subcritical water extraction (SWE) of Echinacea purpurea flowers. The influence of temperature and extraction time on quality of extracts considering total phenols content, total flavonoids content, antioxidant capacity and extraction yield, was determined. Optimized extraction parameters for maximised investigated responses were as follows: 147.56 °C and 8.43 min. The experimental values agreed with the values predicted, thus indicating the adequacy of central composite experimental design for modelling the SWE of bioactive compounds from E. purpurea. Results of the study also highlighted the potential application of E. purpurea subcritical water extracts as a source of valuable bioactive compounds.     

Single-step preparation of rutile-type CrNbO4 and CrTaO4 oxides from oxalate precursors–characterization and properties

Chromium niobate and tantalate (CrNbO₄ and CrTaO₄) were synthesized by pyrolysis of the oxalate-based heterometallic complexes [Cr₂(bpy)₄(μ-O)₄Nb₂(C₂O₄)₄]·3H₂O (Cr-Nb) and [Cr(bpy)₂(H₂O)(μ-O)Ta(C₂O₄)₃]₂·3.5H₂O (Cr-Ta) (bpy = 2,2'-bipyridine). Compared to conventional solid-state synthesis, herein studied oxides are prepared at lower temperatures, in one step without repeating grinding procedures. The structure, morphology, and optical properties of the as-synthesized oxides were characterized using powder X-ray diffraction (PXRD), field emission scanning electron microscopy (SEM), the thermogravimetric and differential thermal analysis (TG/DTA) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The determined band gap energies of CrNbO₄ and CrTaO₄ are 2.39 and 2.82 eV, respectively, which prompted us to investigate photocatalytic activity of these oxides in degradation of dyes. Microscopy studies show that the particles of both oxides began to aggregate into bigger particles, leading to an increase in grain size. Additionally, magnetization measurements on both oxides revealed spin-glass behavior at low temperatures.     

Novel design approach for the creation of 3D geometrical model of personalized bone scaffold

Bone scaffolds provide a structural support for tissue development. Existing bone scaffolds are mainly characterized by complex porous designs whose shortcomings are a low level of permeability for growing tissue, and a difficult design customization. Scaffolds with nucleuses (rods or lattices) as basic elements should improve bone regeneration and enable higher design flexibility. In this paper, we present two new methods for building 3D geometrical models of personalized scaffolds, which are based on method of anatomical features. Methods are demonstrated in the case of scaffold for the mandible bone. This approach greatly reduces the designer effort and time, while enabling easy personalization of scaffolds’ shape and geometry.     

Influence of thermal cycling treatment on the anneal hardening effect of Cu–10Zn Alloy

This paper reports the results of investigations on the influence of the so called thermal cycling treatment on the anneal hardening effect of the copper-based Cu–10 at.% Zn alloy. The quenched samples were subjected to cold rolling of 20, 40 and 60% in reduction, followed by annealing with and without thermocycling treatment below the recrystallization temperature. Anneal hardening effect was observed in both samples in the temperature range between 180 and 300 °C and was followed by an increase in the hardness and electrical conductivity. These investigations showed that the thermal cycling treatment some increased the intensity of anneal hardening effect.     

Investigation of mechanism of Al(OH)3 crystal growth

Crystallization of Al(OH)₃ that occurs during the decomposition of caustic soda solutions is an important part of Bayer process for alumina production. Several phenomena, which influence the physicochemical characteristics of precipitated Al(OH)₃, occur simultaneously during this process. They are nucleation, agglomeration, and crystal growth of Al(OH)₃. In this article, we have investigated the mechanism of Al(OH)₃ crystal growth from pure caustic soda solutions and in the presence of oxalic acid. The results have shown that the growth of Al(OH)₃ crystals from caustic soda solutions follow the B + S model (birth and spread). New Al(OH)₃ particles, formed during the decomposition process of pure caustic soda solutions, are characterized by regular hexagonal shape. The nuclei have the same geometry as the contact face. However, microstructural investigations of Al(OH)₃ samples, obtained by crystallization from caustic soda solutions in the presence of oxalic acid, have shown the presence of nuclei of irregular shape in addition to regular ones. So, the presence of oxalic acid in the caustic soda solutions leads to a change in crystal habit. Besides, the results obtained by kinetic investigation confirmed the mentioned mechanism of Al(OH)₃ crystal growth.     

Behaviour of bone origin hydroxyapatite at elevated temperatures and in O2 and CO2 atmospheres

In the present work the behaviour of HAp extracted from pig bones at elevated temperatures up to 1000 °C in O₂ and CO₂ atmospheres has been studied. It has been found that CO₂ atmosphere arrests HAp decomposition. Chemical analysis and infrared spectroscopy reveal that no free CaO appears and no decrease of CO₃⁻² group concentration occurs in the material calcined in CO₂ atmosphere. In the O₂ atmosphere at elevated temperatures, CaO and CO₂ are emitted from the samples, although the remaining material retains the HAp structure as indicated by the X-ray diffraction.     

In‐vitro study on the efficacy of tannin fractions of edible nuts as antioxidants

Tannin fractions were isolated from crude acetonic extracts of defatted walnut, hazelnut and almond kernels using Sephadex LH‐20 column chromatography. The obtained material was characterized by content of total phenolics and electrophoretic separations using capillary zone electrophoresis (CZE). The antioxidant activities of the tannin fractions were analyzed by several methods: DPPH and ABTS assays, photochemiluminescence (PCL) method, as well as in two lipid model systems: emulsion with β‐carotene‐linoleic acid and L ‐α‐lecithin liposomes. The contents of total phenolics in the tannin fractions of walnuts, hazelnuts and almonds were 550, 329 and 83 mg catechin eq/g, respectively. The electrophoretic profiles of hazelnut and almond tannin fractions were similar, in contrast to the walnut profile. All analyzed fractions exhibited strong antioxidant properties. The antioxidant capacity of lipid‐soluble (ACL) compounds determined by PCL method was the highest for the fraction isolated from walnuts – 7.35 mmol Trolox eq/g. The DPPH radical and the ABTS radical cation were scavenged by the walnut tannin fraction with a higher efficacy than by the two other fractions. EC₅₀ values of the DPPH method were 1.8 times higher for the hazelnut fraction and 2.3 times higher for the almond fraction when compared to the walnut tannins. In turn, the total antioxidant activity values were 8.17, 2.82 and 1.98 mmol Trolox eq/g for the walnut, hazelnut and almond fractions, respectively. On the other hand, in both lipid models applied, lower antioxidant activity of walnut tannins than of hazelnut tannins was noted. The antioxidant effect of almond tannins was weaker or similar than that of walnut tannins in the β‐carotene‐linoleic acid emulsion and the L ‐α‐lecithin liposomal system, respectively.     

Aluminium electrodeposition from AlCl3-NaCl melts on glassy carbon,platinum and gold electrodes

The electrochemical deposition and dissolution of aluminium on glassy carbon, platinum and gold electrodes in chloraluminate melts have been investigated using linear sweep voltammetry and potentiostatic pulse techniques. It was shown that deposition of aluminium on the glassy carbon electrode at low overpotentials takes place by 3-D progressive nucleation and growth, with the incorporation of atoms in the crystal lattice as the rate-determining step. At overpotentials higher than –100 mV vs Al, in the melts containing more than 52 mol % of AlCl₃, diffusion of Al₂Cl ₇ ^– , takes over the control of deposition of aluminium. Alloying of platinum and gold electrodes with aluminium from the melt occurs in the underpotential region.