Personalization of Web browsing: adaptations to meet the needs of older adults

Despite difficulties in using the Web, older adults are motivated to use it. This paper reports on work underway to ease Web access for this population. Although Web accessibility standards provide specifications that Web content providers must incorporate if their pages are to be accessible, these standards do not guarantee a good experience for all Web users. This paper will discuss user controls that make a number of dynamic adaptations to page presentation and input that can greatly increase the usability of Web pages for older users. The paper will discuss the authors original work on the topic, lessons learned, and usage patterns. Current extensions to that work are also discussed.     

Silver-island films as substrates for enhanced Raman scattering: effect of deposition rate on intensity.

The relationship between surface-enhanced resonance Raman scattering (SERRS) intensity and the rate of deposition during silver-island film preparation was examined, using zinc tetraphenylporphine (ZnTPP) as the adsorbate. The effect of the deposition rate on the optical properties of the films at specific wavelengths was also analyzed. The data show that the film extinction (the term extinction is used rather than absorption because the spectra have not been corrected for reflection or scattering losses) increases exponentially at 514 and 458 nm as the deposition rate is decreased. SERRS intensities also increase exponentially at these two excitation wavelengths with a decrease in the deposition rate. The optical density is linearly related to the SERRS intensity, and maximal enhancement is observed for films with the greatest extinction at these excitation wavelengths. In contrast, neither the extinction at 406 nm nor the SERRS scattering intensities resulting from excitation at this wavelength differ substantially. The surface-enhanced Raman scattering (SERS) intensity and the electronic spectra of 4,4'-bipyridine (BP) adsorbed onto silver films as a function deposition rate were also examined. The behavior of the nonresonantly enhanced BP is comparable to that of the resonantly enhanced ZnTPP samples. The effects of the surface morphology, as determined from transmission electron micrographs of the films at various deposition rates, on the corresponding electronic spectra and SERS/SERRS spectra are described.     

Sorghum distillers dried grain lipid extract increases cholesterol excretion and decreases plasma and liver cholesterol concentration in hamsters

Grain sorghum is a rich source of phytochemicals. In this study, male hamsters were fed AIN-93M diets supplemented with a hexane-extractable lipid fraction from sorghum distillers dried grains with solubles (DDGS). Diets contained 0.0%, 0.5%, 1.0%, and 5.0% (w/w) DDGS lipid extract. After 4 wk, the 5.0% DDGS lipids group had significantly lower plasma non-HDL cholesterol and liver esterified cholesterol concentration. Faecal neutral sterol (i.e., cholesterol) excretion was significantly higher in the 5.0% DDGS lipids group compared to the other treatments (66% higher compared to controls). Bile acid excretion was not affected by DDGS lipid intake. Faecal cholesterol excretion was negatively correlated with liver cholesterol concentration (r = ?0.97, P = 0.026), and liver cholesterol concentration was directly correlated with plasma total cholesterol concentration (r = 0.96, P = 0.041). Thus, lipid extract of sorghum DDGS exhibited cholesterol-lowering properties due, at least in part, to increased cholesterol excretion from the body and could provide health benefits when incorporated into human diets.     

Steerable miniature jumping robot

Jumping is used in nature by many small animals to locomote in cluttered environments or in rough terrain. It offers small systems the benefit of overcoming relatively large obstacles at a low energetic cost. In order to be able to perform repetitive jumps in a given direction, it is important to be able to upright after landing, steer and jump again. In this article, we review and evaluate the uprighting and steering principles of existing jumping robots and present a novel spherical robot with a mass of 14 g and a size of 18 cm that can jump up to 62 cm at a take-off angle of 75°, recover passively after landing, orient itself, and jump again. We describe its design details and fabrication methods, characterize its jumping performance, and demonstrate the remote controlled prototype repetitively moving over an obstacle course where it has to climb stairs and go through a window. (See videos 1–4 in the electronic supplementary material.)     

Impact of traffic localization on communication rates in ad-hoc networks

The effect of traffic distribution on communication rates and receiver complexity in ad-hoc networks is addressed, considering a network with constant density of users and a certain traffic model. Information theoretic upper bounds on communication rates are derived under an assumption that transmitting nodes as well as receiving nodes cooperate. It is shown that for the case of large signal attenuation the bounds hold even when the cooperation among users is limited to a certain region of the network domain. Furthermore, achievability bounds on communication rates are derived. The bounds rely on two proposed local cooperation strategies. A comparison shows that the upper bounds are tight and closely follow the achievability results. Finally, the impact of traffic localization on the receiver complexity is addressed.     

Current regulator instabilities on parallel voltage-sourceinverters

Parallel inverters are often used to meet system power requirements beyond the capacity of the largest single structure. They have also been used to reduce harmonics, reduce pulsewidth modulation (PWM) switching frequency and increase available output voltage or frequency. The type of parallel structure depends on the construction of the load motor; the most prevalent are dual three-phase machines, split-phase machines, six-phase machines, and a standard three-phase machine with interphase reactors. Operation of parallel structures presents areas for investigation encompassing analysis, simulation, control, and design. This paper reports on the commissioning of a 775 HP dual-winding three-phase motor with parallel inverters. A simple method of paralleling structures with carrier-based PWM current regulators to independently regulate each inverter's current is employed. Experimental results show a loss of current control that is similar to a random event. The instability between the parallel inverters and the common motor can result in large uncontrolled currents. Simulations established that the reduction in controller gain, as the regulator enters the PWM pulse-dropping or overmodulation region, results in a loss of current control. Experimental results show the loss of current control is the result of an interaction between the parallel inverters through the dual-wound three-phase motor. Modifications were made to the modulator and a two-phase discontinuous controller was employed; the gain characteristic of the two-phase modulator in the overmodulation region extends the dynamic range of the motor drive     

Porous polyurethane foam for use as a particle collection substrate in a nanoparticle respiratory deposition sampler

Porous polyurethane foam was evaluated to replace the eight nylon meshes used as a substrate to collect nanoparticles in the Nanoparticle Respiratory Deposition (NRD) sampler. Cylindrical (25 mm diameter by 40 mm deep) foam with 100 pores per inch was housed in a 25-mm-diameter conductive polypropylene cassette cowl compatible with the NRD sampler. Pristine foam and nylon meshes were evaluated for metals content via elemental analysis. The size-selective collection efficiency of the foam was evaluated using salt (NaCl) and metal fume aerosols in independent tests. Collection efficiencies were compared to the nanoparticulate matter (NPM) criterion and a semi-empirical model for foam. Changes in collection efficiency and pressure drop of the foam and nylon meshes were measured after loading with metal fume particles as measures of substrate performance. Substantially less titanium was found in the foam (0.173 µg sampler^?1) compared to the nylon mesh (125 µg sampler^?1), improving the detection capabilities of the NRD sampler for titanium dioxide particles. The foam collection efficiency was similar to that of the nylon meshes and the NPM criterion (R² = 0.98, for NaCl), although the semi-empirical model underestimated the experimental efficiency (R² = 0.38). The pressure drop across the foam was 8% that of the nylon meshes when pristine and changed minimally with metal fume loading (～19 mg). In contrast, the pores of the nylon meshes clogged after loading with ～1 mg metal fume. These results indicate that foam is a suitable substrate to collect metal (except for cadmium) nanoparticles in the NRD sampler.

Copyright © 2016 American Association for Aerosol Research