Control Characteristics of Inverter-Fed Induction Motor

Efficient use of an inverter-fed induction motor drive necessitates a knowledge of the characteristics of the induction motor from a " control" point of view. The characteristics of both the voltage -and the current-source inverter-fed induction motor drive are investigated, neglecting the filter time constants in the link and feedback loops. Of particular interest is the role played by the voltage/current and frequency inputs. Their effects on variables that are not often discussed such as torque angle, stator real power, airgap flux- linkages and stator and rotor voltages/currents are studied. A by- product of this aspect of the study leads to the nature of feedback signals and their suitability for control purposes. It is also found that the link filter has little effect on relative suitability of these signals. A study of the current source induction motor drive dynamics for torque angle feedback is included.     

Speckle-contrast monitoring of tissue thermal modification

Measurements of the contrast value of time-averaged speckle-modulated images of cartilage tissue are used to study tissue thermal modification in the case of laser-light treatment. This modification is related to thermally induced internal stress relaxation in the matrix of the treated tissue. The specific feature of the evolution of time-averaged speckle contrast with a change in the current temperature of modified collagen tissue is the typical looplike form of the contrast-temperature dependencies associated with irreversible changes in tissue structure and correlated with changes in the tissue diffuse transmittance and the tissue internal stress mentioned by other researchers.     

Resolution improvement in two-photon fluorescence microscopy with a single-mode fiber

The dependence of spectral broadening of an ultrashort-pulsed laser beam on the fiber length and the illumination power is experimentally characterized in order to deliver the laser for two-photon fluorescence microscopy. It is found that not only the spectral width but also the spectral blue shift increases with the fiber length and illumination power, owing to the nonlinear response in the fiber. For an illumination power of 400 mW in a 3-m-long single-mode fiber, the spectral blue shift is as large as 15 nm. Such a spectral blue shift enhances the contribution from the short-wavelength components within the pulsed beam and leads to an improvement in resolution under two-photon excitation, whereas the efficiency of two-photon excitation is slightly reduced because of the temporal broadening of the pulsed beam. The experimental measurement of the axial response to a two-photon fluorescence polymer block confirms this feature.     

4He Impurity Effect on the Positive Ion Mobility in Liquid 3He

The behaviour of ⁴ He impurities has been investigated through positive ion mobility measurements in liquid ³ He at milliKelvin temperatures. In spite of the enormous surface area of the cell, the influence of ⁴ He lasted for hundreds of hours at temperatures of 20 mK. However below 10 mK, the ⁴ He impurities were quickly frozen out on the cell walls and we were free from the impurity problem. Nevertheless the multiple ion signal occasionally appeared even at a few mK, although it disappeared for a number of ionization pulses.     

A population study of integrate-and-fire-or-burst neurons

Any realistic model of the neuronal pathway from the retina to the visual cortex (V1) must account for the bursting behavior of neurons in the lateral geniculate nucleus (LGN). A robust but minimal model, the integrate-and-fire-or-burst (IFB) model, has recently been proposed for individual LGN neurons. Based on this, we derive a dynamic population model and study a population of such LGN cells. This population model, the first simulation of its kind evolving in a two-dimensional phase space, is used to study the behavior of bursting populations in response to diverse stimulus conditions.     

Transceiver cascade system analysis and design via a contribution method

An approach to the design of cascade receiver and transmitter systems for maximum spurious‐free dynamic range (SFDR) is introduced. The contribution method developed here provides a good initial assignment of noise figure, gain, and linearity requirement to individual stages and enables informed assessment of trade‐offs during system design. Application of the approach to the design of a receiver preselector cascade for maximum SFDR is discussed. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

A dielectrophoretic chip packaged at wafer level

The paper presents a dielectrophoretic chip, fully enclosed, with bulk silicon electrodes fabricated using wafer-to-wafer bonding techniques and packaged at the wafer level. The silicon electrodes, which are bonded to two glass dies, define in the same time the walls of the microfluidic channel. The device is fabricated from a silicon wafer that is bonded (at wafer level) anodically and using SU8 photoresist between two glass wafers. The first glass die includes drilled holes for inlet/outlet connections while the second glass die assure the electrical connections, through via holes and a metallization layer, between the silicon electrodes and a printing circuit board.     

HTGR reactor physics and fuel cycle studies

The high-temperature gas-cooled reactor (HTGR) appears as a good candidate for the next generation of nuclear power plants. In the “HTR-N” project of the European Union Fifth Framework Program, analyses have been performed on a number of conceptual HTGR designs, derived from reference pebble-bed and hexagonal block-type HTGR types. It is shown that several HTGR concepts are quite promising as systems for the incineration of plutonium and possibly minor actinides.These studies were mainly concerned with the investigation and intercomparison of the plutonium and actinide burning capabilities of a number of HTGR concepts and associated fuel cycles, with emphasis on the use of civil plutonium from spent LWR uranium fuel (first generation Pu) and from spent LWR MOX fuel (second generation Pu). Besides, the “HTR-N” project also included activities concerning the validation of computational tools and the qualification of models. Indeed, it is essential that validated analytical tools are available in the European nuclear community to perform conceptual design studies, industrial calculations (reload calculations and the associated core follow), safety analyses for licensing, etc., for new fuel cycles aiming at plutonium and minor actinide (MA) incineration/transmutation without multi-reprocessing of the discharged fuel.These validation and qualification activities have been centred round the two HTGR systems currently in operation, viz. the HTR-10 and the HTTR. The re-calculation of the HTTR first criticality with a Monte Carlo neutron transport code now yields acceptable correspondence with experimental data. Also calculations by 3D diffusion theory codes yield acceptable results. Special attention, however, has to be given to the modelling of neutron streaming effects. For the HTR-10 the analyses focused on first criticality, temperature coefficients and control rod worth. Also in these studies a good correspondence between calculation and experiment is observed for the 3D diffusion theory codes.