Microfiltration of thin stillage: Process simulation and economic analyses

In plant scale operations, multistage membrane systems have been adopted for cost minimization. We considered design optimization and operation of a continuous microfiltration (MF) system for the corn dry grind process. The objectives were to develop a model to simulate a multistage MF system, optimize area requirements and stages required for a multistage system and perform economic analysis of a multistage MF system for a 40 million gal/yr ethanol plant. Total area requirement decreased with number of stages but there was tradeoff between higher capital costs involved at higher number of stages. To achieve thin stillage total solids concentration from 7 to 35%, a 5 stage membrane system was found to be optimum with area requirement of 655 m² for minimum cost. Increase in the input stream flow rate from 1.54 × 10⁶ to 2.89 × 10⁶ L/day significantly increased the total capital cost of the system by 47%. Compared to a single stage system, an optimal system had a 50% reduction in operating costs. Optimal system also showed potential to process more than twice the amount of thin stillage compared to a 4 effect evaporator system for given conditions.     

Performance analysis of a solar photovoltaic operated domestic refrigerator

This paper describes the fabrication, experimentation and simulation stages of converting a 165 l domestic electric refrigerator to a solar powered one. A conventional domestic refrigerator was chosen for this purpose and was redesigned by adding battery bank, inverter and transformer, and powered by solar photovoltaic (SPV) panels. Various performance tests were carried out to study the performance of the system. The coefficient of performance (COP) was observed to decrease with time from morning to afternoon and a maximum COP of 2.102 was observed at 7 AM. Simulations regarding economic feasibility of the system for the climatic conditions of Jaipur city (India) were also carried out using RETScreen 4. It was observed that the system can only be economically viable with carbon trading option taken into account, and an initial subsidy or a reduction in the component costs – mainly SPV panels and battery bank.     

Study on TL and OSL characteristics of indigenously developed CaF2:Mn phosphor

CaF₂:Mn phosphor is known for its high thermoluminescent sensitivity and dose linearity up to few kGy. In the present study CaF₂ phosphor with different concentration of Mn dopant was prepared and was characterized through different techniques. The phosphor was prepared through chemical root using CaCO₃, HF acid and MnCl₂ as raw materials following co-precipitation method. TL sensitivity of the prepared phosphor was compared with other well established phosphors used for radiation dosimetry. It was found that the TL sensitivity is higher by a factor of 10 with respect to LiF:Mg, Ti, TLD-100 and half to that of CaSO₄:Dy (0.05 mol%) phosphor. X-ray diffraction, TL emission spectrum and ESR spectrum taken of the prepared phosphor confirms the crystal structure, Mn²⁺ emission and incorporation Mn in the crystal, respectively. No significant fading of the dosimetric peak was observed of the prepared phosphor for a storage period of 45 days. The dose linearity of the phosphor was found to be in the range of 50 Gy-3 kGy within an uncertainty of about 10%. An attempt was made to determine the kinetic parameters of TL glow curve and the parameters related to optically stimulated luminescence. In view of its long range of dose linearity, it can be used for the dosimetry of commercial irradiator generally used for the irradiation of food and grains in our country.     

Light-colored compound conductive coatings based on CuI: Effect of volume fraction of CuI on morphology and electrical conductivity

A novel family of compound conductive coating has been designed and developed using Cu(I)I (cuprous iodide) as electrical conducting material. A carefully designed polyurethane matrix material allowed incorporation of large volume fraction of CuI, much above its critical volume concentration, while maintaining good film integrity. Electrical conductivity of a series of such coatings has been studied using dielectric spectroscopy, as a function of volume fraction of CuI and temperature. The light-colored (white–beige colored) coatings having electrical conductivity of the order of up to 10⁻³–10⁻² S cm⁻¹ have been demonstrated. Scanning electron microscopy (SEM) has been used to characterize bulk coating microstructures. The result of this study provides useful insight for fabrication of compound conductive coatings based on CuI.     

Dissolved gases as partitioning tracers for determination of hydrogeological parameters

In this study, dissolved Kr and SF6 gases were used to determine various hydrogeological parameters of laboratory columns under water-saturated and partially saturated conditions as a function of the flow velocity. The dissolved gases behaved conservatively in saturated columns but were significantly retarded in unsaturated conditions as a direct function of the Henry's law constant (KH) and the ratio of column pore spaces filled with air and water (Vg/Vw). Lower aqueous diffusion coefficients for SF6 compared to that for Kr also resulted in significant rate-limited mass transport across gas-water interface. This effect was exacerbated at higher flow velocities as was indicated by the asymmetric shape of breakthrough curves, more so in the case of SF6. A nonequilibrium advective-dispersive transport model accurately described tracer breakthrough and was used to estimate parameters such as final Vg/Vw under partially saturated conditions and partitioning rates. Internally consistent model results were obtained for both dissolved gases despite the wide range in physical properties (e.g., KH and aqueous diffusion coefficients), suggesting that dissolved Kr and SF6 may be used in conjunction to delineate and validate aquifer characteristics simultaneously from a single pulse injection of the tracer.     

A test of metabolically efficient coding in the retina

We tested the hypothesis that aspects of the neural code of retinal ganglion cells are optimized to transmit visual information at minimal metabolic cost. Under a broad ensemble of light patterns, ganglion cell spike trains consisted of sparse, precise bursts of spikes. These bursts were viewed as independent neural symbols. The noise in each burst was measured via repeated presentation of the visual stimulus, and the energy cost was estimated from the total charge flow during ganglion cell spiking. Given these costs and noise, the theory of efficient codes predicts an optimal distribution of symbol usage. Symbols that are either noisy or costly occur less frequently in this optimal code. We found good qualitative and quantitative agreement with the measured distribution of burst sizes for ganglion cells in the tiger salamander retina.     

Durability of FRP Composite Bridge Deck Materials under Freeze-Thaw and Low Temperature Conditions

Fiber-reinforced polymer (FRP) composites, especially lightweight sandwich structures, are rapidly finding their way into civil infrastructure application. FRP composite panels are particularly attractive as bridge deck systems due to their high strength, low density, and durability, which are of importance to the bridge industry. Most of the vast amount of durability data for FRP has been generated for aerospace and automotive applications, which involve very different service conditions than civil infrastructure. For civil engineering applications, it is essential to examine the durability performance of FRP materials under weathering conditions. The ultimate goal of this research is to develop a reliable framework for durability assessment of FRP decks, including laboratory testing procedure and finite-element simulation capability. Such a framework should be applicable to all types of FRP deck construction. In this paper, specimens of typical FRP bridge deck skin materials are subjected to freeze-thaw cycling between 4.4 and ?17.8°C in media of dry air, distilled water, and saltwater, and constant freeze at ?17.8°C . The selected deck is used as an example for demonstration purposes. In addition, selected specimens are subjected to simultaneous environmental exposure conditions and sustained loading of 25% ultimate strain. It should be emphasized that most of the environmental conditions reported in the literature produce minor deterioration of a single composite property, and the assessment of such effect on this single property becomes unreliable because of a large property variation. Therefore, in this paper we use multiple mechanical properties as performance indices for damage evaluation. Based on findings from this work, it is concluded that freeze-thaw cycling between 4.4 and ?17.8°C alone and up to 1,250 h and 625 cycles caused very insignificant or no change in the flexural strength, storage modulus, and loss factor of the FRP specimens conditioned in dry air, distilled water, and saltwater. Small reductions in storage modulus (about 1% or less) were observed when specimens were prestrained and subjected to 250 freeze-thaw cycles in distilled water and saltwater. Changes in flexural strength were statistically insignificant, since they were within the data scatter.     

On a stochastic sensor selection algorithm with applications in sensor scheduling and sensor coverage

In this note we consider the following problem. Suppose a set of sensors is jointly trying to estimate a process. One sensor takes a measurement at every time step and the measurements are then exchanged among all the sensors. What is the sensor schedule that results in the minimum error covariance? We describe a stochastic sensor selection strategy that is easy to implement and is computationally tractable. The problem described above comes up in many domains out of which we discuss two. In the sensor selection problem, there are multiple sensors that cannot operate simultaneously (e.g., sonars in the same frequency band). Thus measurements need to be scheduled. In the sensor coverage problem, a geographical area needs to be covered by mobile sensors each with limited range. Thus from every position, the sensors obtain a different view-point of the area and the sensors need to optimize their trajectories. The algorithm is applied to these problems and illustrated through simple examples.     

Model for oxygen transfer in rotating biological contactor

Rotating biological contactor is being widely used for wastewater treatment but there is an apparent lack of knowledge about the rate at which oxygen transfer occurs, in physical and biological system. In this study the transfer of oxygen from air to water by a rotating disc air-liquid contactor in physical system is investigated. The oxygen transfer model suggested by Kim and Molof, Water Sci. Technol. 14 (1982) 569, was modified and the developed model is termed as modified Kim and Molof model. The model was calibrated by using available data in literature and validated by experiments conducted in this study. The effect of significant physical parameters was integrated into a single term and is termed as volume renewal number. The modified Kim and Molof model was compared with the other available models. The coefficient of determination (R(2)) for the modified Kim and Molof model obtained is 0.95 which is much higher than in the other available models. Thereby the model is expected to estimate oxygen transfer more accurately. Further, a simplified linear model between K(L)a and the volume renewal number is proposed. Both modified Kim and Molof and linear model estimate the overall oxygen transfer coefficient (K(L)a) accurately.     

Pulse oximetry theory and calibration for low saturations

Pulse oximetry is a widely used technique in biomedical optics, but currently available pulse oximeters rely on empirical calibration approaches, which perform poorly at low saturations. We present an exact solution for pulse oximetry and show how this can be used as the basis for the development of a semiempirical calibration approach that may be useful, especially at low saturations and variable probe geometries. This new approach was experimentally tested against traditional empirical calibration techniques on transmission pulse oximetry for monitoring of fetal sheep using a minimally invasive spiral probe. The results open the way for the development of more accurate pulse oximetry.