Preparation of eicosapentaenoic acid concentrates from sardine oil by Bacillus circulans lipase

An extracellular lipase derived from Bacillus circulans, isolated from marine macroalga, Turbinaraia conoides, was used to prepare n-3 polyunsaturated fatty acid (PUFA) concentrates from sardine oil triglycerides. The enzyme was purified 132-fold with specific activity of 386 LU/mg. The purified lipase was able to enrich sardine oil with 37.7 ± 1.98% 20:5n-3 and 5.11 ± 0.14% 18:3n-3 in the triglyceride fraction after 3 h of hydrolysis. Lower hydrophobic constants of n-3 fatty acids (18:3n-3_logP = 5.65; 20:5n-3_logP = 5.85, respectively) than n-6 (20:4n-6_logP = 6.16) resulted in higher hydrolytic resistance of the former toward lipase, leading to their enrichment in the triglyceride fraction. Lipase-catalysed hydrolysis of sardine oil for 3 h, followed by urea complexation, provided free fatty acids containing 51.3 ± 4.65% 20:5n-3. The purified methyl ester of 20:5n-3 (68.29 ± 2.15%) from the urea concentrate was attained by chromatography on argentated neutral alumina.     

Direct incorporation of vanadium into three-dimensional KIT-6: 1. Optimization of synthesis conditions

Three dimensional (3-D) cubic KIT-6 with directly incorporated vanadium was hydrothermally synthesized by using Pluronic P123 and n-butanol as the structure-directing mixture, tetraethyl orthosilicate (TEOS) as the silica source and NH₄VO₃ as the vanadium source. The molar composition was varied in the range of 0.017 P123/0.08–2.4 V/1.0–2.0 TEOS/1.31–1.70 BuOH/1.83–3.00 HCl/195 H₂O. The orderness of mesopore structure was estimated by X-ray diffraction, N₂ adsorption, and TEM analysis. The effects of the amount of HCl, TEOS and BuOH on the structure of KIT-6 were discussed. The time and temperature for the synthesis of KIT-6 were also optimized. The amount of vanadium content influenced the framework structure and crystallinity of the Ia3d phase significantly.     

Direct incorporation of vanadium into three-dimensional KIT-6: 2. Reactivity test for styrene oxidation

The direct incorporation of vanadium into the three-dimensional (3-D) cubic Ia3d mesostructure designated as V-KIT-6 was prepared, and the material obtained therein showed a very high specific surface area of ∼1,000 m²/g with tunable pore diameters in a narrow distribution of sizes, ∼5.7 to 6.0 nm. The coordination and nature of the V sites in V-KIT-6 were characterized by ⁵¹V-spin-echo NMR analysis. It shows that after calcination, the V⁴⁺ species are totally oxidized to the V⁵⁺ state with 4- and 6-coordinated V-O environments in a highly dispersed state with much less crystalline V₂O₅ formation. The calcined V-KIT-6 materials showed excellent catalytic activity in the direct oxidation of styrene using tert-butyl hydroperoxide (TBHP) as an oxidant.     

Development of optoelectronic-based pulsed current sensor to detect the poor laser discharge condition

A current transformer (CT)-based sensor has been developed to detect poor discharge conditions in copper vapour laser. The optoelectronic-based pulsed current sensor architecture involves the optical transmitter–receiver HFBR, high-frequency current transformer, and fiber optic link. The CT has been designed and calibrated to ensure generation of an optical signal at the current threshold crossover. Bandwidth analysis of the CT is carried out using the bode plot. The optoelectronic inter-conversion of the pulsed voltage of the CT and transmission via fiber optic link provides the non-contact current sensing and remote signal processing of the signal. This study discusses the details of the sensor.     

Growth by SR method and characterization of hippuric acid single crystals

The potential organic nonlinear optical material of hippuric acid (HA) has been grown by novel unidirectional solution growth method using dimethyl formamide (DMF) as the solvent. The crystal system has been identified and lattice dimensions have been measured from the single crystal X-ray diffraction analysis. The crystalline perfection has been evaluated by high resolution X-ray diffraction (HRXRD) technique and found that the crystal quality is reasonably good. However, it contains a low angle structural grain boundary. The relative second harmonic generation (SHG) has been tested using Kurtz powder technique and found to be 1.54 times higher than that of potassium dihydrogen phosphate (KDP) single crystal. Its optical character has been assessed by UV-Vis. analysis and found that there is no absorption in the entire visible region.     

Epoch Extraction by Phase Modelling of Speech Signals

Epochs are instants of significant excitation of vocal-tract system in speech production process. In this paper, we attempt to extract information about epochs from phase spectra of speech signals. The phase spectrum of speech is modelled as the response of an allpass (AP) filter, and the resulting error signal is used for epoch extraction. The parameters of AP model are estimated by imposing sparsity constraints on the error signal. The error signal, thus obtained, exhibits prominent peaks at epoch locations. The epochal candidates obtained from the error signal are refined using a dynamic programming algorithm. The performance of the proposed method is consistent across genders and is comparable with the state-of-the-art methods.     

Color Characterization and Balancing by a Nonlinear Line Attractor Network for Image Enhancement

A novel method to map high dynamic range scenes to low dynamic range images utilizing the concept of color characterization, enhancement, and balancing is described in this letter. Each pixel of the image is first characterized by extracting the relationship of the red, green, and blue components along with its corresponding neighbors using a nonlinear line attractor network to form an associative memory. Then, the illumination enhancement process is performed using a hyperbolic tangent function to provide dynamic range compression to each pixel in the image. The slope of the hyperbolic tangent function is controlled using a parameter that is determined by the local and global statistics of the image to facilitate the change of the intensity level. A color balancing process restores the original color characteristics of the image based on learned associative memory matrices which eliminate image distortion due to improper recombination of red, green and blue components after enhancement. Experiments conducted on images captured at extremely uneven lighting environments show that the proposed method outperforms other image enhancement algorithms.     

Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich

Drilling and fastening of hybrid materials in one-shot operation reduces cycle time of assembly of aerospace structures. One of the most common problems encountered in automatic drilling and riveting of multimaterial is that the continuous chips curl up on the body of the tool. Drilling of carbon fiber reinforced plastic (CFRP) is manageable, but when the minute drill hits the aluminium (Al) or titanium (Ti), the hot and continuous chips produced during machining considerably damage the CFRP hole. This study aims to solve this problem by employing nano-coated drills on multimaterial made of CFRP and aluminium alloy. The influence of cutting parameters on the quality of the holes, chip formation and tool wear were also analyzed. Two types of tungsten carbide drills were used for the present study, one with nano-coating and the other, without nano coating. The experimental results indicated that the shape and the size of the chips are strongly influenced by feed rate. The thrust force generated during drilling of the composite plate with coated drills was 10–15% lesser when compared to that generated during drilling with uncoated drills; similarly, the thrust force in the aluminium alloy was 50% lesser with coated drills when compared to thrust force generated without coated drills. Thus, the use of nano-coated drills significantly reduced the surface roughness and thrust force when compared with uncoated tools.     

Investigation on structural,optical, thermal,mechanical and dielectric properties of l-proline cadmium chloride monohydrate single crystals: An efficient NLO material

In the present work, we have grown single crystals of l-proline cadmium chloride monohydrate (LPCCM) by slow evaporation solution technique (SEST) at room temperature and recorded their live growth kinetics with the help of inverted microscope. Crystal size at various stages of growth and its corresponding morphology was also recorded. Powder X-ray diffraction (PXRD) analysis of LPCCM single crystals confirmed the orthorhombic structure. Respective values of crystallite size, strain and dislocation density have been calculated using PXRD data. Metal complex coordination of the single crystal is studied by FTIR spectroscopic. The optical properties of the grown crystals were investigated through UV–VIS spectroscopic studies and shows that the crystals have very low absorption in entire characterized wavelength range 200–800 nm. The optical band gap was calculated and found to be ∼5.6 eV. Optical constants of the material is determined by theoretical calculations. The chemical etching study was also carried out to study the density of defects in the grown crystals. The photoluminous excitation and emission spectra and thermal property by TGA/DTA curve were recorded. Further, the mechanical properties have been studied using Vicker's microhardness tester as well as many parameters such as fracture toughness (K_c), Brittleness index (B_i) and yield strength (σ_ν) are presented. Dielectric studies have been carried out with varying frequency and temperatures.