Prony methods in NMR spectroscopy

The Prony method and a modified Prony method (MPM), developed to improve the performance of this technique at low signal-to-noise ratio, are described and applied to analysis of magnetic resonance spectroscopy (MRS) signals. Furthermore, the way in which results from MPM can be used as prior information in a Bayesian model is also described. First, analysis on simulated data is used to establish the methods' limits of reliability. Their performance with respect to peak identification and quantification of nuclear magnetic resonance parameters are then assayed on real data. Results of application of the methods to ¹H-MRS signals from cultured cells are discussed and compared with those deriving from application of fast Fourier transform. © 1997 John Wiley & Sons, Inc. Int J Imaging Syst Technol, 8, 565–571, 1997     

A GC–MS study of the addition reaction of aryl amines with acrylic monomers

Previous studies have shown that the interaction of carboxylic acid groups with the amine functionalities of aryl amines, especially secondary and tertiary aryl amines, can lead to the free-radical polymerization of acrylic monomers such as methyl methacrylate. In this study, the Michael addition reaction of primary and secondary aryl amines with acrylic monomers such as acrylic acid (AA) was investigated. Equivalent amounts of either p-toluidine (PT) or N-phenylglycine (NPG) and AA were combined in polar solvents such as ethanol. The reactions were conducted at ambient (23°C) or near-ambient (37–60°C) temperatures. Samples (about 3–5 mg) of these products were then trimethylsilylated with a solution consisting of 0.4 mL of bis(trimethylsilyl)trifluoroacetamide (BSTFA) and 0.4 mL of acetonitrile by heating for 30 min at 140°C under N₂. These derivatives were characterized by gas chromatography–mass spectrometry (GC–MS). The GC–MS analyses suggest that 1 mol of the primary amine PT had reacted with 2 mol of AA to yield the expected N-p-tolyliminodipropionic acid. Similarly, the secondary amine NPG added to 1 mol of AA yielded the corresponding mixed iminodiacid, N-phenyliminoacetic–propionic acid. It would appear that the Michael reaction of primary and secondary amines with acrylic monomers may offer a general, facile synthetic route to a variety of tertiary amines. Aryl amino acids of the type synthesized in this study may find use in a number of dental applications, e.g., as surface-active adhesive agents and as polymerization initiators or activators. © 1998 John Wiley & Sons, Inc. J Appl Polm Sci 67:1545–1551, 1998     

Impact of work on women at midlife.

Examined the impact of employment status on the self-esteem, psychological well-being, and physical health of 389 middle-aged (40–59 yrs old) women (206 employed outside the home and 183 homemakers). Ss completed a number of scales of psychological well-being (including the Rosenberg Self-Esteem Scale and the Lack of Depression Scale) from the national survey, The Survey of Modern Living, conducted in 1976. Results indicate that working Ss at midlife had higher self-esteem and less psychological anxiety than homemakers. Working Ss also reported being in better physical health than homemakers. Findings suggest that work may act as a stabilizing force for women during critical periods throughout the life cycle. (14 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Performance and degradation of high temperature polymer electrolyte fuel cell catalysts

An investigation of carbon-supported Pt/C and PtCo/C catalysts was carried out with the aim to evaluate their stability under high temperature polymer electrolyte membrane fuel cell (PEMFC) operation. Carbon-supported nanosized Pt and PtCo particles with a mean particle size between 1.5 nm and 3 nm were prepared by using a colloidal route. A suitable degree of alloying was obtained for the PtCo catalyst by using a carbothermal reduction. The catalyst stability was investigated to understand the influence of carbon black corrosion, platinum dissolution and sintering in gas-fed sulphuric acid electrolyte half-cell at 75 °C and in PEMFC at 130 °C. Electrochemical active surface area and catalyst performance were determined in PEMFC at 80 °C and 130 °C. A maximum power density of about 700 mW cm⁻² at 130 °C and 3 bar abs. O₂ pressure with 0.3 mg Pt cm⁻² loading was achieved. The PtCo alloy showed a better stability than Pt in sulphuric acid after cycling; yet, the PtCo/C catalyst showed a degradation after the carbon corrosion test. The PtCo/C catalyst showed smaller sintering effects than Pt/C after accelerated degradation tests in PEMFC at 130 °C.     

An experimental study of simulated plasma-covered slots on cylinders and cones

The effect of a plasma on the radiation characteristics of slot and gap apertures located on cylinders and cones has been studied by means of a plasma simulation technique. The relative index of refraction of less than unity between the plasma and free space was maintained for the model by an analog tank in which free space was represented by a high dielectric constant liquid and plasma by a lower dielectric material. The antenna pattern of an axial slot on a cylinder with a simulated plasma covering had good agreement with theory for radiation in the equatorial plane, as did the antenna pattern for a simulated plasma-covered, center-fed, cylindrical antenna. The experimental pattern of a cavity-fed circumferential slot on a cone-hemisphere covered with simulated plasma is also presented.     

Investigation of low cost carbonaceous materials for application as counter electrode in dye-sensitized solar cells

The structural and morphologic properties of different carbonaceous materials were studied by X-ray diffraction (XRD), Brunauer–Emmet–Teller (BET) porosimetry and transmission electron microscopy (TEM) analyses. The electrochemical behaviour of these powders used as counter electrode in dye-sensitized solar cells (DSSCs) was investigated by polarization experiments and electron impedance spectroscopy. Results were compared with DSSC using Pt as counter electrode. All DSSCs based on the carbonaceous materials showed conversion efficiencies higher than those equipped with Pt. Among the various carbon materials investigated, Acetylene Black in conjunction with graphite showed the best performance. This was interpreted from the physico-chemical analysis as due to a compromise between pores accessibility for the I₃ ^? reactant presents in electrolyte and appropriate surface graphiticity index of this carbonaceous material. A high degree of graphitization for the carbon black was found to enhance electron conduction and charge transfer properties.     

Latent Thermal Storage for Solar Cooling Applications: Materials Characterization and Numerical Optimization of Finned Storage Configurations

ABSTRACT

The present paper presents the development of a thermal energy storage system for application with non-concentrating solar plants using phase change materials (PCMs). The outcomes of an experimental analysis on commercial PCMs and laboratory-grade chemical compounds suitable for latent heat storages in a temperature range of 80–100°C is presented, with main focus on to the enthalpy and the cycle stability of the materials. Particularly, a first evaluation of possible degradation mechanisms in hydrated salts was investigated by means of nuclear magnetic resonance spectroscopy. The best performing materials have been implemented in a numerical model, based on the enthalpy method, used for the design of a thermal storage system. The configuration of the system, starting from a simple shell-and-tube layout, has been optimized by inserting asymmetric fin-and-tubes and the results with two selected materials have been compared. The analysis has shown that the most promising materials are the commercial ones belonging to the classes of paraffinic materials and hydrated salts and that, with the designed configuration, it is possible to store up to 200 kJ/m³ and get a peak power during discharge of about 1.5 kW.     

精密模拟技术中速度、噪声等性能胜过数字技术

我经常会从文章中看到：模拟技术正在被淘汰，一切都应是数字技术。最近，我参与了一个设计项目，它表明这种观点在许多情况下并不适用。     

Optimization and diagnostic accuracy of computerized tomography with tridimensional spiral technique in the study of craniostenosis

INTRODUCTION: Conventional Computed Tomography (CT) with three-dimensional (3D) reconstructions is considered the most complete and accurate imaging modality to diagnose craniosynostosis. However, the introduction of Spiral CT (SCT) opened new possibilities for 3D studies of the skull in pediatric patients with craniosynostosis. The purpose of our study is two fold: first, to optimize the scanning and imaging parameters to obtain diagnostic images in a single spiral scan; second, to assess the diagnostic accuracy of such images in the identification of normal and abnormal cranial vault sutures. MATERIAL AND METHODS: Seventy-eight pediatric patients (age range: 1-35 months; mean: 11.8 months) with craniosynostosis were submitted to SCT of the head. The images were acquired with the following parameters: 3- and 5-mm nominal slice thickness, 5-6 mm/s table feed (pitch 1-2), 165 mAs and 120 kV. Two different algorithms and increases were used for image reconstructions. A first set of images was reconstructed with 2-mm increases and a soft tissue algorithm: these images were used for brain studies and for 3D reconstructions. A second set of slices was reconstructed with 5-mm increases and a bone algorithm to visualize the sutures of the axial plane. The 3D images were processed with the Shaded Surface Display software with threshold values ranging 120-150 HU. All images were acquired with a single spiral scan lasting less than 30 seconds. Two blinded radiologists analyzed the 3D and the planar images independently to evaluate the course and depth of each cranial suture. The sensitivity, specificity and diagnostic accuracy of both 3D and planar SCT images were evaluated. The frequency of artifacts (the Lego effect, boiled egg, pseudoforamina, movement, and chainsaw artifacts) and their influence on the final diagnosis were studied on 3D SCT images. RESULTS: The diagnostic accuracy rates of 3D SCT images, by suture, were: sagittal 90.7%, metopic 100%, left lamboid 90.9%, right lamboid 93.9%, left coronal 85.7%, right coronal 91.1%. The diagnostic accuracy rates of the axial images, by suture, were: sagittal 90.7%, metopic 95.5%, left lamboid 86.4%, right lamboid 90.9%, left coronal 83.7%, right coronal 91.1%. The interobserver agreement on 3D images was: sagittal 91.1%, metopic 100%, left lamboid 88.9%, right lamboid 91.1%, left coronal 88.9%, right coronal 84.4%. The Lego effect artifact was the most frequent one (82%) and affected image evaluation in 6.3% of cases. CONCLUSIONS: Our results prove that 3D SCT is a very accurate technique for identifying normal and abnormal sutures and presents many advantages over conventional 3D CT in the examination of pediatric patients with craniosynostosis. The quality of 3D SCT images was adequate and the artifacts did not affect the final diagnostic yield significantly.     

Amorphous Calcium Phosphate-Based Bioactive Polymeric Composites for Mineralized Tissue Regeneration

Amorphous calcium phosphate (ACP), a postulated precursor in the formation of biological hydroxyapatite, has been evaluated as a filler phase in bioactive polymeric composites that utilize dental monomers to form the matrix phase on polymerization. In addition to excellent biocompatibility, these composites provided sustained release of calcium and phosphate ions into simulated saliva milieus. In an effort to enhance the physicochemical and mechanical properties and extend the utility of remineralizing ACP composites to a greater variety of dental applications, we have focused on: a) hybridizing ACP by introducing silica and/or zirconia, b) assessing the efficacy of potential coupling agents, c) investigating the effects of chemical structure and compositional variation of the resin matrices on the mechanical strength and ion-releasing properties of the composites, and d) improving the intrinsic adhesiveness of composites by using bifunctional monomers with an affinity for tooth structure in resin formulations. Si- and Zr-modified ACPs along with several monomer systems are found useful in formulating composites with improved mechanical and remineralizing properties. Structure-property studies have proven helpful in advancing our understanding of the remineralizing behavior of these bioactive composites. It is expected that this knowledge base will direct future research and lead to clinically valuable products, especially therapeutic materials appropriate for the healing or even regeneration of defective teeth and bone structures.