Inkjet‐Printed Nanocavities on a Photonic Crystal Template

The last decade has witnessed the rapid development of inkjet printing as an attractive bottom‐up microfabrication technology due to its simplicity and potentially low cost. The wealth of printable materials has been key to its widespread adoption in organic optoelectronics and biotechnology. However, its implementation in nanophotonics has so far been limited by the coarse resolution of conventional inkjet‐printing methods. In addition, the low refractive index of organic materials prevents the use of “soft‐photonics” in applications where strong light confinement is required. This study introduces a hybrid approach for creating and fine tuning high‐Q nanocavities, involving the local deposition of an organic ink on the surface of an inorganic 2D photonic crystal template using a commercially available high‐resolution inkjet printer. The controllability of this approach is demonstrated by tuning the resonance of the printed nanocavities by the number of printer passes and by the fabrication of photonic crystal molecules with controllable splitting. The versatility of this method is evidenced by the realization of nanocavities obtained by surface deposition on a blank photonic crystal. A new method for a free‐form, high‐density, material‐independent, and high‐throughput fabrication technique is thus established with a manifold of opportunities in photonic applications.     

Use of an amorphous iron oxide hydrated as catalyst for hydrogen peroxide oxidation of ferulic acid in water

The abatement of ferulic acid (FA), a polyphenolic constituent of olive mill wastewater, is studied in the pH range 5.0-7.0 by using hydrogen peroxide and an amorphous iron oxide as catalyst. The effect of pH, catalyst load, hydrogen peroxide and substrate starting concentrations is assessed during the investigation. A suitable reaction scheme is developed and used to build a mathematical model which satisfactorily describes the system's behavior. Kinetic constants for the proposed scheme as well as the total active site concentration of the catalyst in the studied pH range are estimated. The occurrence of internal mass-transfer limitation for the adopted granulometric fraction of the catalyst is demonstrated.     

Hybrid composite scaffolds prepared by sol–gel method for bone regeneration

This study reports the synthesis and characterization of hydroxyapatite (HA)/polycaprolactone (PCL) hybrid composite materials synthesized by sol–gel method. The fabrication of scaffolds was performed by salt-leaching technique using NaCl as porogen agent. In the first step, the physico-chemical characterization of composite material was performed to evaluate the composition and the interaction between the organic/inorganic phases. In the second step, optimized scaffolds were bioactivated on the surface. The combined effect of scaffold morphology and surface bioactivity is ideal for bone tissue engineering, supporting bone cells adhesion, proliferation and differentiation. Here, a combined strategy involving biomimetic approach, using a supersaturated Simulated Body Fluid (SBF), and salt-leaching technique has been developed to grow hydroxyapatite in composite scaffolds able to regenerate the natural bone.     

Manganese-induced growth of GaAs nanowires

GaAs nanowires have been grown on SiO2 and GaAs by molecular beam epitaxy using manganese as growth catalyst. Transmission electron microscopy shows that the wires have a wurtzite-type lattice and that alpha-Mn particles are found at the free end of the wires. X-ray absorption fine structure measurements reveal the presence of a significant fraction of Mn-As bonds, suggesting Mn diffusion and incorporation during wire growth. Transport measurements indicate that the wires are p-type, as expected from doping of GaAs with Mn.     

Hydraulic Jumps on Rough Beds

This paper presents the results of an experimental investigation on the hydraulic jump on horizontal rough beds. Experiments were carried out to study the effect of bed roughness on both the sequent depth ratio and the roller length. The investigation allowed the writers to positively test the reliability of a new solution of the momentum equation for the sequent depth ratio as a function of the Froude number and the ratio between the roughness height and the upstream supercritical flow depth. The applicability of some empirical relationships for estimating the roller length was also tested.     

Nanostructured Ag platforms as biosensors of nucleobase chains

Nanostructured Ag platforms have been obtained by simple chemical procedure and characterized by AFM (atomic force microscopy) measurements, for use in biosensing by means of SERS (surface-enhanced Raman scattering) spectroscopy. The SERS efficiency of these substrates has been verified by microRaman measurements on small RNA chains with different nucleobase content, showing sensitivity near attomole level. It is our opinion that these metal substrates may be widely used as appropriate sensors for detecting biomolecules in many applications concerning medical diagnostics, pharmacological research and nanomaterials technology.     

The thalamic low-threshold Ca²⁺ potential: a key determinant of the local and global dynamics of the slow (<1 Hz) sleep oscillation in thalamocortical networks

During non-rapid eye movement sleep and certain types of anaesthesia, neurons in the neocortex and thalamus exhibit a distinctive slow (<1 Hz) oscillation that consists of alternating UP and DOWN membrane potential states and which correlates with a pronounced slow (<1 Hz) rhythm in the electroencephalogram. While several studies have claimed that the slow oscillation is generated exclusively in neocortical networks and then transmitted to other brain areas, substantial evidence exists to suggest that the full expression of the slow oscillation in an intact thalamocortical (TC) network requires the balanced interaction of oscillator systems in both the neocortex and thalamus. Within such a scenario, we have previously argued that the powerful low-threshold Ca(2+) potential (LTCP)-mediated burst of action potentials that initiates the UP states in individual TC neurons may be a vital signal for instigating UP states in related cortical areas. To investigate these issues we constructed a computational model of the TC network which encompasses the important known aspects of the slow oscillation that have been garnered from earlier in vivo and in vitro experiments. Using this model we confirm that the overall expression of the slow oscillation is intricately reliant on intact connections between the thalamus and the cortex. In particular, we demonstrate that UP state-related LTCP-mediated bursts in TC neurons are proficient in triggering synchronous UP states in cortical networks, thereby bringing about a synchronous slow oscillation in the whole network. The importance of LTCP-mediated action potential bursts in the slow oscillation is also underlined by the observation that their associated dendritic Ca(2+) signals are the only ones that inform corticothalamic synapses of the TC neuron output, since they, but not those elicited by tonic action potential firing, reach the distal dendritic sites where these synapses are located.     

Steel Thermo‐Fluid‐Dynamics at Tundish Drainage and Quality Features

In steelmaking and casting, transient operations are very critical for product quality and process regularity. This holds especially for the tundish. Typical drawbacks can occur at ladle change, where, for example, refilling high flow rates induce flow short‐circuits risky for dispersed oxides (“inclusions”) dragging towards the strands. At drainage, vortices formation can affect steel cleanliness via slag entrapment. Such topics were investigated for an industrial tundish with computational fluid dynamics validated tools. The focus was given on a multi‐strand layout more prone to unevenness features. As a matter of fact, the different steel path to reach different strands causes often too high temperature differences and different strand cleanliness levels. Strands closer to the tundish center, are generally hotter and less clean; the others, slightly colder but cleaner. Multiphase models, together with advanced meshing techniques and validated boundary conditions, were used to describe tundish refilling and drainage. Within the operating conditions of concern, a bath height of 300 mm was found as a best compromise between the need of avoiding slag entrapment through vortices and to have maximum yield. Once applied into operating practice, no rejection for cleanliness or customer claims were achieved. As refers to temperature loss from ladle to tundish, a drop at strands of about 2 and of 4°C from tundish inlet to strand, in agreement with plant data over about 700 heats and literature experiments under the same operating conditions, were found.     

Localised boundary air layer and clothing evaporative resistances for individual body segments

Evaporative resistance is an important parameter to characterise clothing thermal comfort. However, previous work has focused mainly on either total static or dynamic evaporative resistance. There is a lack of investigation of localised clothing evaporative resistance. The objective of this study was to study localised evaporative resistance using sweating thermal manikins. The individual and interaction effects of air and body movements on localised resultant evaporative resistance were examined in a strict protocol. The boundary air layer's localised evaporative resistance was investigated on nude sweating manikins at three different air velocity levels (0.18, 0.48 and 0.78 m/s) and three different walking speeds (0, 0.96 and 1.17 m/s). Similarly, localised clothing evaporative resistance was measured on sweating manikins at three different air velocities (0.13, 0.48 and 0.70 m/s) and three walking speeds (0, 0.96 and 1.17 m/s). Results showed that the wind speed has distinct effects on local body segments. In contrast, walking speed brought much more effect on the limbs, such as thigh and forearm, than on body torso, such as back and waist. In addition, the combined effect of body and air movement on localised evaporative resistance demonstrated that the walking effect has more influence on the extremities than on the torso. Therefore, localised evaporative resistance values should be provided when reporting test results in order to clearly describe clothing local moisture transfer characteristics. PRACTITIONER SUMMARY: Localised boundary air layer and clothing evaporative resistances are essential data for clothing design and assessment of thermal comfort. A comprehensive understanding of the effects of air and body movement on localised evaporative resistance is also necessary by both textile and apparel researchers and industry.     

Hall mobility in doped Si:H,Cl films

The Hall mobility μ_H in phosphorus- and boron-doped Si:H, Cl films was measured in the temperature range 130–300 K.The conductivity is markedly influenced by the doping, and the activation energies of both the Hall mobility and the conductivity as functions of the temperature are much lower in doped samples than in undoped samples. The process tends to become unactivated at higher doping levels.