Fast Ion Transport in Li-Rich Alloy Anode for High-Energy-Density All Solid-State Lithium Metal Batteries

All-solid-state Li batteries (ASSLBs) with solid-polymer electrolytes are considered promising battery systems to achieve improved safety and high energy density. However, Li dendrite formation at the Li anode under high charging current density/capacity has limited their development. To tackle the issue, Li-metal alloying has been proposed as an alternative strategy to suppress Li dendrite growth in ASSLBs. One drawback of alloying is the relatively lower operating cell voltages, which will inevitably lower energy density compared to cells with pure Li anode. Herein, a Li-rich Li₁₃In₃ alloy electrode (LiRLIA) is proposed, where the Li₁₃In₃ alloy scaffold guides Li nucleation and hinders Li dendrite formation. Meanwhile, the free Li can recover Li's potential and facilitate fast charge transfer kinetics to realize high-energy-density ASSLBs. Benefitting from the stronger adsorption energy and lower diffusion energy barrier of Li on a Li₁₃In₃ substrate, Li prefers to deposit in the 3D Li₁₃In₃ scaffold selectively. Therefore, the Li–Li symmetric cell constructed with LiRLIA can operate at a high current density/capacity of 5 mA cm⁻²/5 mAh cm⁻² for almost 1000 h.     

An Improved Multifactor User Authentication Scheme for Wireless Sensor Networks

Wireless Personal Communications - Wireless Sensor Networks (WSNs) are used to collect and transmitted the data in various applications from normal to those which requires significant security...     

Nanowire encapsulation with polymer for electrical isolation and enhanced optical properties

Light management and electrical isolation are essential for the majority of optoelectronic nanowire (NW) devices.Here,we present a cost-effective technique,based on vapor-phase deposition of parylene-C and subsequent annealing,that provides conformal encapsulation,anti-reflective coating,improved optical properties,and electrical insulation for GaAs nanowires.The process presented allows facile encapsulation and insulation that is suitable for any nanowire structure.In particular,the parylene-C encapsulation functions as an efficient antireflection coating for the nanowires,with reflectivity down to ＜1％ in the visible spectrum.Furthermore,the parylene-C coating increases photoluminescence intensity,suggesting improved light guiding to the NWs.Finally,based on this process,a NW LED was fabricated,which showed good diode performance and a clear electroluminescence signal.We believe the process can expand the fabrication possibilities and improve the performance of optoelectronic nanowire devices.     

Development and gamma-scintigraphy study of Hibiscus rosasinensis polysaccharide-based microspheres for nasal drug delivery

Objective: This work describes the application of natural plant polysaccharide as pharmaceutical mucoadhesive excipients in delivery systems to reduce the clearance rate through nasal cavity.

Methods: Novel natural polysaccharide (Hibiscus rosasinensis)-based mucoadhesive microspheres were prepared by using emulsion crosslinking method for the delivery of rizatriptan benzoate (RB) through nasal route. Mucoadhesive microspheres were characterized for different parameters and nasal clearance of technetium-99m (^99mTc)-radiolabeled microspheres was determined by using gamma-scintigraphy.

Results: Their Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) studies showed that the drug was stable during preparation of microspheres. Aerodynamic diameter of microspheres was in the range 13.23?±?1.83–33.57?±?3.69?µm. Change in drug and polysaccharide ratio influenced the mucoadhesion, encapsulation efficiency and in-vitro release property. Scintigraphs taken at regular interval indicate that control solution was cleared rapidly from nasal cavity, whereas microspheres showed slower clearance (p?Conclusion: Natural polysaccharide-based microspheres achieved extended residence by minimizing effect of mucociliary clearance with opportunity of sustained delivery for longer duration.     

Neural Network Method for Solving Partial Differential Equations

A method is presented to solve partial differential equations (pde's) and its boundary and/or initial conditions by using neural networks. It uses the fact that multiple input, single output, single hidden layer feedforward networks with a linear output layer with no bias are capable of arbitrarily well approximating arbitrary functions and its derivatives, which is proven by a number of authors and well known in literature. Knowledge about the pde and its boundary and/or initial conditions is incorporated into the structures and the training sets of several neural networks. In this way we obtain networks of which some are specifically structured. To find the solution of the pde and its boundary and/or initial conditions we have to train all obtained networks simultaneously. Therefore we use an evolutionary algorithm to train the networks. We demonstrate the working of our method by applying it to two problems.     

SUSANS With Polarized Neutrons

Super Ultra-Small Angle Neutron Scattering (SUSANS) studies over wave vector transfers of 10^–4 nm^–1 to 10^–3 nm^–1 afford information on micrometer-size agglomerates in samples. Using a right-angled magnetic air prism, we have achieved a separation of ≈10 arcsec between ≈2 arcsec wide up- and down-spin peaks of 0.54 nm neutrons. The SUSANS instrument has thus been equipped with the polarized neutron option. The samples are placed in a uniform vertical field of 8.8 × 10⁴ A/m (1.1 kOe). Several magnetic alloy ribbon samples broaden the up-spin neutron peak significantly over the ±1.3 × 10^–3 nm^–1 range, while leaving the down-spin peak essentially unaltered. Fourier transforms of these SUSANS spectra corrected for the instrument resolution, yield micrometer-range pair distribution functions for up- and down-spin neutrons as well as the nuclear and magnetic scattering length density distributions in the samples.     

Influence of surface roughness on friction and scuffing behaviour of cast iron under sparse lubrication

Friction and scuffing behaviour of grey cast iron as influenced by the surface roughness under sparse lubrication conditions is studied. The studies are carried out on a three-shoe-on-disc machine under the conditions of parallel sliding. The experiments were conducted at three oil supply rates of 0.10, 0.22 and 0.36 μg/cm² per contact obtained through a mist oiling system and with specimens of cast iron shoes of different roughness values, Ra, between 0.04 and 2.0 μm against a 0.55% C steel disc. In a step load procedure, the friction torque at the end of each load step and the scuffing load are the major parameters measured. Results of friction and scuffing behaviour as a function of roughness and oil supply rates have been discussed.     

Non-traditional machining processes by means of velocity shear instability in plasma

The material removal within different machining process can be performed in distinct modalities. One of the modality is based on the effect of impact phenomenon. In this paper theoretical model of non-traditional machining process based on impact phenomenon is discussed. The material is removed from the surface due to the impact of ions. The velocity of ions is equal to the velocity at which the electrostatic ion-cyclotron instability driven by parallel flow velocity shear generated by massive ions takes place. The main ways for the material removal as consequence of the impact phenomenon are the microcracking, microcutting, melting and vaporizing of small quantities from the work-piece surface layer.     

Hydrogenation behavior on 30 nm vanadium thin films with two different adhesion conditions

The influence of a thin polycarbonate de-adhesion layer on the hydrogen concentration is studied on 30 nm vanadium films deposited on glass substrates, using electrochemical hydrogenography in an optical microscopy and scanning tunneling microscopy. It is shown that the optical reflection provides information about the de-adhesion morphology (buckles) while the optical transmission signal gives information about concentration and film thickness changes. Artificially patterned samples allow simultaneous studying adhered and de-adhered film parts, for similar mean concentrations. The optical data clearly show a different hydrogen behavior of the two parts. Data interpretation suggests higher local hydrogen content in the adhered film parts than for the detached films parts. Strong changes in the optical transmission of the adhered film parts can be attributed to strong morphological changes at the film surface. These changes are mainly attributed to grain sliding processes in the vanadium film.     

CAMO: A context-aware movie ontology generated from LOD and movie databases

Multimedia Tools and Applications - An ontology is a formal representation of domain knowledge as a set of concepts and their relationships in structured format. Besides various applications,...