Effect of evaporation time on the pervaporation characteristics through homogeneous aromatic polyamide membranes. II. Pervaporation performances for ethanol/water mixture

Pervaporation of ethanol/water mixtures through symmetric dense aromatic polyamide membranes was investigated. The membrane structure was controlled by varying the solvent evaporation time before gelation. The membranes were water-selective and the selectivity increased with an increase in the solvent evaporation time. On the other hand, the water flux as well as the ethanol flux decreased with an increase in the evaporation time. These results were consistent with the morphology change of the membrane which takes place with solvent evaporation: the decrease in the channel size. The effects of the downstream pressure on the pervaporation performances were also studied for membranes with different solvent evaporation times. the ethanol concentration in the permeate side increased with an increase in the downstream pressure to certain point, showed a maximum there, then decreased thereafter. The water flux decreased with an increase in the downstream pressure for all membranes studied; the dependence was expressed by a parabolic curve in the lower pressure range. The ethanol flux also decreased with an increase in the downstream pressure for the membrane with shorter evaporation time, while this flux was slightly affected by the downstream pressure for the membrane with longer evaporation time. © 1996 John Wiley & Sons, Inc.     

Effect of tanniniferous Terminalia chebula extract on rumen biohydrogenation, ∆(9)-desaturase activity, CLA content and fatty acid composition in longissimus dorsi muscle of kids

Conjugated linoleic acid, a fatty acid found in milk fat and ruminant meat is one of the functional food components. Modifying fatty acid composition so as to increase CLA and other beneficial PUFA/MUFA level and reducing SFA levels might be a key to enhance the neutraceutical and therapeutic value of ruminant-derived food products. In the present experiment, the effect of supplementation of polyphenol rich Terminalia chebula plant extract at different concentrations (1.06 g/kg and 3.18 g/kg of body weight in T1 and T2 groups, respectively) was investigated on fatty acid composition of rumen fluid, plasma, intramuscular fat and Δ9-desaturase activity in longissimus dorsi muscle of crossbred kids. Total MUFA and PUFA content in muscle were enhanced by 25 and 35%, respectively, whereas SFA was reduced by 20% thereby improving the desaturation index. Δ9-desaturase activity also increased by 47% resulting in an enhancement of total CLA content (58.73%) in muscle.     

Studies of nanocomposites based on carbon nanomaterials and RTV silicone rubber

The mechanical and electrical properties were investigated for nanocomposites based on carbon nanotubes (CNTs) and conductive carbon black (CB). Solution room‐temperature‐vulcanized silicone rubber was used as a matrix. Vulcanizates based on CNTs and CB was prepared by solution mixing. With the addition of 2 phr of CNTs to the rubber matrix, the Young's modulus increased by 272% and reached as high as ～706% at 8 phr, whereas the modulus increased only 125% for CB specimens at 10 phr. Similarly, the electrical properties at 5 phr content of CNT were ～0.7 kΩ against ～0.9 kΩ at 20 phr CB. The Kraus plot from equilibrium swelling tests shows that the high properties for CNT specimens are due to high polymer–filler interfacial interactions, the small particle size that improves the distribution of the filler in a highly exfoliated state, and high electrical connective networks among the filler particles. These improvements can especially influence medical products such as feeding tubes, seals and gaskets, catheters, respiratory masks and artificial muscles. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44407.     

Electron transfer reaction and mechanism of oxidation of Inosine

Electrochemical oxidation of Inosine has been studied in the phosphate buffers of pH range 3.3-10.9 at pyrolytic graphite electrode. In the entire pH range a single well-defined oxidation peak (I_a) was observed, when the sweep was initiated in the positive direction. In the reverse sweep no cathodic peak was obtained. The peak potential of the oxidation peak was dependent on pH and shifted to less positive potential with increase in pH. The kinetics of the UV absorbing intermediate was followed spectrophotometrically and the decay occurred in a pseudo first order reaction having k values in the range 0.50-0.92 × 10⁻³ s⁻¹ in the entire pH range studied. The value of n was found to be 2.95 ± 0.3. The products of oxidation were silylated and characterized by using GC-Mass. Two tetramers having CC, CN, NN, CON and COOC linkages were identified. A plausible mechanism for the electrooxidation of Inosine has been suggested.     

Low-Temperature Sintering of La(Ca)CrO3 Powder Prepared through the Combustion Process

Ultrafine La(Ca)CrO₃ (LCC) powder was prepared through the glycine–nitrate gel combustion process. It was shown for the first time that the use of relatively inexpensive CrO₃ as a starting material for chromium has potential for the bulk preparation of sinter-active LCC powder. As-prepared powder, when calcined at 700°C, resulted in LCC along with a small amount of CaCrO₄. The calcined powder was found to be composed of soft agglomerates with a particle size of ≈70–290 nm. The cold pressing and sintering of the calcined powder at 1200°C resulted in the mono-phasic La_0.7Ca_0.3CrO₃ with density ≈98% of its theoretical value. This is the lowest sintering temperature ever reported for La_0.7Ca_0.3CrO₃. The conductivity of the sintered La_0.7Ca_0.3CrO₃ at 1000°C was found to be ≈57 S/cm in air. The sintering and electrical behavior achieved for La_0.7Ca_0.3CrO₃ may find application as an interconnect material for high-temperature solid oxide fuel cells if problems with chemical expansion and poor conductivity in fuel can be overcome.