Synthesis,characterization, and drug release properties of poly(N-isopropylacrylamide) gels prepared in methanol–water cononsolvent medium

Poly(N-isopropylacrylamide) (PNIPAM) hydrogels were simply prepared by free radical polymerization in different methanol–water mixture. A scanning electron microscopy study revealed that the freeze-dried hydrogels were macroporous. The swelling ratios in water at 20°C of the resulting hydrogels followed the order: X_0.43>X_0.21>X_0.76 ≈ X_0.57>X_0.31>X_0.13>X_0.06>X₀, where X_m denotes a gel prepared in a methanol–water mixture with m mole fraction of methanol (x_m). Below the lower critical solution temperature, the swelling ratio values of all of the hydrogels gradually decreased with the increase in the temperature. The complete collapse of the PNIPAM chain of all the gels occurred at about 38°C, whereas the same was observed at about 35°C for the conventional gel prepared in water. The swelling ratio values of all the PNIPAM gels in the methanol–water mixtures with different x_m values at 20°C passed through a minimum in the cononsolvency zone. The deswelling rates of the hydrogels decreased in the following order: X_0.43> X_0.31> X_0.21> X_0.57> X_0.76 ≈ X_0.13> X_0.06> X₀. The reswelling rates of these hydrogels decreased in the following order: X₀> X_0.31> X_0.06 ≈ X_0.13 > X_0.76> X_0.57> X_0.21> X_0.43. The release rates of the Tramadol Hydrochloride drug at 37°C from the drug-loaded hydrogels were almost same for all of the hydrogels. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Impact of Electron Beam on Storage Protein Subunits,In Vitro Protein Digestibility and Trypsin Inhibitor Content in Soybean Seeds

The present investigation was carried out to study the effect of 4.8, 9.2, 15.3 and 21.2 kGy of electron beam (EB)-irradiation on major storage proteins viz. glycinin (11S) and β-conglycinin (7S), in vitro protein digestibility (IVPD), and trypsin inhibitor (TI) content in seeds of three soybean genotypes. Densitometry of SDS-PAGE protein profile revealed significant (P < 0.05) reduction in α’, α and β subunits of 7S fraction at all doses. This reduction was higher (P < 0.05) than the decline observed in acidic and basic subunit of 11S fraction. Basic subunit registered significant (P < 0.05) increase at specific doses in two genotypes. All the doses induced significant (P < 0.05) increase in IVPD, and the increase due to 9.2, 15.3 and 21.2 kGy was higher (P < 0.05) compared to 4.8 kGy dose. The impact on TI content was genotype-dependent. The study showed a higher (P < 0.05) decline in the concentration of 7S fraction compared to 11S fraction and improvement in IVPD of soybean seeds due to exposure to EB-irradiation, which may influence the functional and nutritional value of soy products processed from them.     

Synthesis of alkyne‐terminated xanthate RAFT agents and their uses for the controlled radical polymerization of N‐vinylpyrrolidone and the synthesis of its block copolymer using click chemistry

Two new alkyne‐terminated xanthate reversible addition‐fragmentation chain‐transfer (RAFT) agents: (S)‐2‐(Propynyl propionate)‐(O‐ethyl xanthate) (X₃) and (S)‐2‐(Propynyl isobutyrate)‐(O‐ethyl xanthate) (X₄) were synthesized and characterized and used for the controlled radical polymerization of N‐vinylpyrrolidone (NVP). X₃ showed better chain transfer ability in the polymerization at 60°C. Molecular weight of the resulted polymer increased linearly with the increase in monomer loading. Kinetics study with X₃ showed the pseudo‐first order kinetics up to 67% monomer conversion. Molecular weight (M_n) of the resulting polymer increased linearly with the increase in the monomer conversion up to around 67%. With the increase in the monomer conversion, polydispersity of the corresponding poly(NVP)s initially decreased from 1.34 to 1.32 and then increased gradually to 1.58. Chain‐end analysis of the resulting polymer by ¹H‐NMR and FTIR showed clearly that polymerization started with radical forming out of xanthate RAFT agent. Living nature of the polymerization was also confirmed from the successful homo‐chain extension experiment and the hetero‐chain extension experiment involving synthesis of poly(NVP)‐b‐polystyrene amphiphilic diblock copolymer. Formed alkyne‐terminated poly(NVP) also allowed easy conjugation to azide‐terminated polystyrene by click chemistry to prepare well‐defined poly(NVP)‐b‐polystyrene block copolymers. Resulting polymers were characterized by GPC, ¹H‐NMR, FTIR, and thermal study. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

ANN-Based Protection Scheme for Power Transformer

The implementation of a pattern recognizer for power system diagnosis can provide great advancement in the protection field. The work reported in this paper demonstrates the use of an Artificial Neural Network (ANN) as a pattern classifier for differential relay operation in the protection scheme for power transformer protection. The proposed relay takes care of maloperation due to inrush current, overexcitation, and ensures operation during internal fault. The off-line experimental result presented in this paper shows that a FeedForward Neural Network (FFNN) can be considered as an attractive alternative method to make the discrimination among normal, magnetizing inrush, overexcitation, and internal fault currents in a digital relay implementation. Results showing the performance of the protection scheme indicate that it is fast and reliable.     

Conjunctive Management of Large-Scale Pressurized Water Distribution and Groundwater Systems in Semi-Arid Area with Parallel Genetic Algorithm

This study develops a production well management model for the conjunctive management of water resources in semi-arid areas. The management model integrates a large-scale pressurized water distribution system and a three-dimensional groundwater model under an optimization framework. The well pump operations optimization problem is formulated as a Boolean integer nonlinear programming (BINLP) problem to optimize the periodic 24-h pump on/off operations over a 1-week operation horizon. The management model considers multiple objectives and is solved by a parallel genetic algorithm (PGA) to overcome the difficulty of solving the BINLP problem. The PGA significantly reduces computation time for a case study in Chandler, Arizona. The Chandler water distribution model is built based on EPANET, and the Chandler three-dimension groundwater model is developed using MODFLOW. The high performance computing (HPC) of the genetic algorithm makes it possible to obtain 24-h real-time operations in the 7-day forecast model. The tank reliability, resilience, and vulnerability (R-R-V) are evaluated to infer the system reliability. The Pareto curve provides compromise solutions between the two competing objectives of energy reduction and pressure violation reduction.     

Identification Scheme for Fractional Hammerstein Models With the Delayed Haar Wavelet

The parameter identification of a nonlinear Hammerstein-type process is likely to be complex and challenging due to the existence of significant nonlinearity at the input side. In this paper, a new parameter identification strategy for a block-oriented Hammerstein process is proposed using the Haar wavelet operational matrix(HWOM). To determine all the parameters in the Hammerstein model, a special input excitation is utilized to separate the identification problem of the linear subsystem from the complete nonlinear process. During the first test period, a simple step response data is utilized to estimate the linear subsystem dynamics. Then, the overall system response to sinusoidal input is used to estimate nonlinearity in the process. A single-pole fractional order transfer function with time delay is used to model the linear subsystem. In order to reduce the mathematical complexity resulting from the fractional derivatives of signals, a HWOM based algebraic approach is developed. The proposed method is proven to be simple and robust in the presence of measurement noises. The numerical study illustrates the efficiency of the proposed modeling technique through four different nonlinear processes and results are compared with existing methods.     

Carboxymethylation of Cassia tora gum

The preparation of carboxymethyl (CM)–Cassia tora gum (CTG) with monochloroacetic acid and sodium hydroxide was investigated under different reaction conditions. The carboxymethylation reaction was studied with respect to the degree of substitution of CM–CTG. The variables studied were the concentration of reactants, methanol–water ratio (solvent), reaction time, and reaction temperature. Carboxymethylation of CTG increased its solubility in cold water and the stability of its paste to microorganisms. Regardless of the degree of substitution of these products, their aqueous solutions were characterized by non‐Newtonian pseudoplastic behavior. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3216–3219, 2003