Observations of high temperature impinging-jet boiling phenomena

A high-speed video camera and microphone were used to capture the flow behavior and boiling sound of a free-surface water jet impinging on a high temperature surface during quench cooling. It was found that depending on the superheat of the surface considerably different flow patterns appeared. For cases where the initial surface temperature was above about 300 °C an almost explosive pattern appeared. This was in contrast to slightly lower temperatures where a liquid sheet flow structure was apparent. The change in phenomena was accompanied by a sudden change in the boiling sound and an increase in the heat transfer rate.     

Laminar natural convection in an inclined complicated cavity with spatially variable wall temperature

Natural convection in two-dimensional enclosure with three flat and one wavy walls is numerically investigated. One wall is having a sinusoidal temperature profile. Other three walls including the wavy wall are maintained at constant cold temperature. This problem is solved by SIMPLE algorithm with deferred QUICK scheme in curvilinear co-ordinates. The tests were carried out for different inclination angles, amplitudes and Rayleigh numbers while the Prandtl number was kept constant. The geometrical configurations considered were namely one, two and three undulations.The results obtained show that the angle of inclination affects the flow and heat transfer rate in the cavity. With increase in amplitude, the average Nusselt number on the wavy wall is appreciably high at low Rayleigh number. Increasing the number of undulations beyond two is not beneficial. The trend of local Nusselt number is wavy.     

A new poly-Si TG-TFT with diminished pseudosubthreshold region: theoretical investigation and analysis

In this paper, we have proposed a new poly-Si triple-gate thin-film transistor (TG-TFT) where the front gate consists of two materials and three sections in order to reduce the OFF state leakage current without affecting the ON state voltage. We have used one and three grain-boundaries in the channel for analyzing the electrical characteristics of the poly-Si TG-TFT. The key idea in this paper is to make the dominant conduction mechanism in the channel to be controlled by the accumulation charge density modulation by the gate and not by the gate-induced grain barrier lowering. As a result, we demonstrate that the TG-TFT exhibits a highly diminished pseudosubthreshold region resulting in a substantial OFF state leakage current without any significant change in the ON voltage when compared to a conventional poly-Si TFT (C-TFT). Using two-dimensional and two-carrier device simulation, we have examined various design issues of the TG-TFT and provided the reasons for the improved performance.     

An Effective Power-Aware At-Speed Test Methodology for IP Qualification and Characterization

Advanced nanometer technologies have led to a drastic increase in operational frequencies resulting in the performance of circuits becoming increasingly vulnerable to timing variations. The increasing process spread in advanced nanometer nodes poses considerable challenges in predicting post-fabrication silicon performance from timing models. Thus, there is a great need to qualify basic building structures on silicon in terms of critical parameters before they could be integrated within a complex System-on-Chip (SoC). The work of this paper presents a configurable circuit and an associated power-aware at-speed test methodology for the purpose of qualifying basic standard cells and complex IP structures to detect the presence of timing faults. Our design has been embedded within test-chips used for the development of the 28 nm Fully Depleted Silicon On Insulator (FD-SOI) technology node. The relevant silicon results and analysis validate the proposed power-aware test methodology for qualification and characterization of IPs and provide deeper insights for process improvements.     

Energy Balanced Model for Lifetime Maximization in Randomly Distributed Wireless Sensor Networks

In this paper, an energy balanced model (EBM) for lifetime maximization for a randomly distributed sensor network is proposed. The lifetime of a sensor network depends on the rate of energy depletion caused by multiple factors, such as load imbalance, sensor deployment distribution, scheduling, transmission power control, and routing. Therefore, in this work, we have developed a mathematical model for analysis of load imbalance under uniform and accumulated data flow. Based on this analysis, we developed a model to rationalize energy distribution among the sensors for enhancing the lifetime of the network. To realize the proposed EBM, three algorithms—annulus formation, connectivity ensured routing and coverage preserved scheduling have been proposed. The proposed model has been simulated in ns-2 and results are compared with Energy-Balanced Transmission Policy and Energy Balancing and unequal Clustering Algorithm. Lifetime has been measured in terms of the time duration for which the network provides satisfactory level of coverage and data delivery ratio. EBM outperform both the existing models. In our model the variance of residual energy distribution among the sensors is lower than other two models. This validated the essence of energy rationalization hypothesized by our model.     

Principles and protocols for power control in wireless ad hoc networks

Transmit power control is a prototypical example of a cross-layer design problem. The transmit power level affects signal quality and, thus, impacts the physical layer, determines the neighboring nodes that can hear the packet and, thus, the network layer affects interference which causes congestion and, thus, affects the transport layer. It is also key to several performance measures such as throughput, delay, and energy consumption. The challenge is to determine where in the architecture the power control problem is to be situated, to determine the appropriate power level by studying its impact on several performance issues, to provide a solution which deals properly with the multiple effects of transmit power control, and finally, to provide a software architecture for realizing the solution. We distill some basic principles on power control, which inform the subsequent design process. We then detail the design of a sequence of increasingly complex protocols, which address the multidimensional ramifications of the power control problem. Many of these protocols have been implemented, and may be the only implementations for power control in a real system. It is hoped that the approach in this paper may also be of use in other topical problems in cross-layer design.     

Adaptive DFE Multiuser Receiver for CDMA Systems using Two-Step LMS-Type Algorithm: An Equalization Approach

This paper presents an adaptive decision feedback equalizer (DFE) based multiuser receiver for code division multiple access (CDMA) systems over smoothly time-varying multipath fading channels using the two-step LMS-type algorithm. The frequency-selective fading channel is modeled as a tapped-delay-line filter with smoothly time-varying Rayleigh-distributed tap coefficients. The receiver uses an adaptive minimum mean square error (MMSE) multiuser channel estimator based on the reduced Kalman least mean square (RK-LMS) algorithm to predict these tap coefficients (Kohli and Mehra, Wireless Personal Communication 46:507–521, 2008). We propose the design of adaptive MMSE feedforward and feedback filters by using the estimated channel response. Unlike the previously available Kalman filtering algorithm based approach (Chen and Chen, IEEE Transactions on Signal Processing 49:1523–1532, 2001), the incorporation of RK-LMS algorithm reduces the computational complexity of multiuser receiver. The computer simulation results are presented to show the substantial improvement in its bit error rate performance over the conventional LMS algorithm based receiver. It can be inferred that the proposed multiuser receiver proves to be robust against the nonstationarity introduced due to channel variations, and it is also beneficial for the multiuser interference cancellation and data detection in CDMA systems.     

WDTF: A Technique for Wireless Device Type Fingerprinting

In this Work, a technique for wireless device type fingerprinting has been introduced. The technique utilizes the information that revealed as a result of the homogeneity in devices of the same make and the heterogeneity in devices of a different make. The diversity in devices of different make is due to different device hardware compositions and the variations in their management capabilities. We apply the statistical technique on network traffic to create unique, reproducible device signatures. We demonstrate the efficacy of our technique on network traffic captured in different scenarios. We have used a total of 300 devices types representing a wide range of device classes. In the experiment, we have used more than 1.5 GB of filtered traffic for analysis and performance evaluation. We measure the performance of the technique by considering the accuracy of device type detection. The results obtained are promising with a higher detection rate than its counterparts.     

Construction and generation of OCDMA code families using a complete row-wise orthogonal pairs algorithm

A new code construction algorithm for incoherent Multi-Dimensional Optical Code Division Multiple Access (MD-OCDMA) for asynchronous fiber optic communication is proposed. We refer multi-dimensionality to two-dimensional (2D) wavelength–time or space–time domains and three-dimensional (3D) space–wavelength–time domains. The application of the algorithm in constructing 2D multiple pulses per row codes and 3D multiple pulses per plane codes is given. The performance of the codes is discussed. In the applications discussed, this construction ensures a maximum crosscorrelation of 1 between any two codes. The proposed codes have complete 1D code allocation, which increases the cardinality. The performance of some codes in literature is compared with the proposed codes. The analyzed performance measure is bit error rate due to multiple access interference for different numbers of active users. The performance analysis shows that the proposed 2D construction offers very low bit error rate at lower spectral efficiency when compared with other 2D constructions. A comparison of the proposed 3D construction with existing 3D constructions shows lower bit error rate for equivalent code dimension. New integrated optic designs for the generation of OCDMA codes using titanium indiffused lithium niobate technology are explored, which can enable compact encoders and decoders for computer communications.