Managing requirements specifications for product lines - An approach and industry case study

Software product line development has emerged as a leading approach for software reuse. This paper describes an approach to manage natural-language requirements specifications in a software product line context. Variability in such product line specifications is modeled and managed using a feature model. The proposed approach has been introduced in the Swedish defense industry. We present a multiple-case study covering two different product lines with in total eight product instances. These were compared to experiences from previous projects in the organization employing clone-and-own reuse. We conclude that the proposed product line approach performs better than clone-and-own reuse of requirements specifications in this particular industrial context.     

Ride comfort optimization of a city bus

Ride comfort optimization of a city bus is considered in this article, using stiffness and related damping of the power unit mounts as design variables. The response of the bus, due to road irregularities, is calculated in the time domain by using a finite element (FE) model describing the complete vehicle. The body of the bus is condensed, using a substructuring technique, in order to reduce the simulation times. Operational deflection shapes (ODS) have been used to compare measured and calculated vibrations and some corrections of the FE model have been done. The response, i.e. acceleration, at three locations in the bus has been frequency-weighted according to the comfort standard ISO 2631:1997. The resulting root mean square (RMS) values of these responses are then used in the objective functions in the optimization procedure. The computational results show that it is possible to increase the ride comfort. However, the improvement of the ride comfort is probably too small to have a substantial subjective impact on the passenger in the bus. The results show that the objective function, regarding the overall ride comfort in the bus, has local optima. Received October 10, 1999     

Thermal diffusivity measurements of some synthetic CaO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> slags

In an attempt to systematize the knowledge of the heat conduction of liquid silicates, the effective thermal diffusivities of some synthetic slags containing CaO, Al₂O₃, and SiO₂ have been measured, using the three-layer laser-flash method on a differential scheme in the temperature range of 1625 to 1825 K. The effective thermal diffusivities measured, which are a combination of the phononic and photonic heat-transfer mechanisms, were found to increase with increasing temperature for all the presently investigated slags. The slag compositions were chosen in such a way that the changes in the effective thermal diffusivities would reflect the changes in the structure of the slags. It was observed that, at a CaO/Al₂O₃ molar ratio of 4.42, an increase of the SiO₂ content had very little effect on the effective thermal diffusivity values. On the other hand, addition of SiO₂ to a slag with the CaO/Al₂O₃ molar ratio of 2.59 resulted in a significant increase in the effective thermal diffusivity. The addition of Al₂O₃ to slags with a constant CaO/SiO₂ molar ratio resulted in a marked increase in the effective thermal diffusivity. Both these trends indicate that there might be an influence of the network formation in silicate melts on the effective thermal diffusivity.     

In-plane contributions to phase contrast in intermittent contact atomic force microscopy

Contrast in the phase response of intermittent-contact atomic force microscopy (IC-AFM) reveals in-plane structural and mechanical properties of polymer monolayers. This result is unexpected, as IC-AFM has previously only been considered as a probe of out-of-plane properties. Until now, AFM measurements of nanoscale in-plane properties have employed contact mode techniques. In-plane property measurements are possible with intermittent contact AFM because there is a small but significant component of tip motion parallel to the sample surface. This in-plane component of tip displacement is virtually universal in AFM, implying that oscillating-tip techniques generally are sensitive to in-plane material properties. We present a simple Hertzian model of intermittent-contact AFM that includes such an in-plane displacement.     

How Small Is a Point Load? A Preliminary Study of the Deformation and Failure of Cartons Subjected to Non‐Uniform Loads

Consumer packaging made from carton board is subjected to a variety of loads as it moves through the value chain. Packaging designers need tools for predicting the strength of packages under these loading conditions. For evenly distributed loads, there are methods for measuring and estimating compression resistance that can provide useful guidance. For loads concentrated to a small area, little work has been published. The aim of this preliminary study is to aid the development of a future test method for point loads by investigating how the size of the load application site influences the mechanical behaviour of the package. Rigid spheres of a range of sizes were used to compress packages. Small spheres gave rise primary damage in the form of a vertical yield line and secondary damage in the form of a parabolic yield line. Larger spheres produced a series of parabolic yield lines of increasing size. No vertical yield line appeared for the larger spheres. The larger spheres showed a stiffness transition at a displacement that could be estimated by considering the geometry of the test. Copyright © 2017 John Wiley & Sons, Ltd.     

Interface engineering of short-period Ni/V multilayer X-ray mirrors

Low-energy ion-assisted magnetron sputter deposition has been used for the synthesis of highly reflective Ni/V multilayer soft X-ray mirrors. A low ion energy and a high ion-to-metal flux ratio were employed in order to stimulate the adatom mobility while minimizing ion-induced intermixing at the interfaces. An analytic model, based on the binary collision approximation, was used in order to gain insight into low-energy ion–surface interactions as a function of ion energy and ion-to-metal flux ratio. The model predicted a favorable region in the ion energy-flux parameter space where only surface atomic displacements are stimulated during growth of Ni and V for multilayers. For a series of Ni/V multilayer mirrors with multilayer periods about Λ = 1.2 nm, grown with a continuous ion assistance using energies in the range 7–36 eV and with ion-to-metal flux ratios Φ_Ni = 4.7 and Φ_V=20.9, specular and diffuse X-ray scattering analyses revealed that ion energies of 27–31 eV produced the best trade-off between reduced interfacial roughness and intermixing. However, it was also concluded that an interface mixing of about ± 1 atomic distance is unavoidable when a continuous flux of assisting ions is used.

To overcome this limitation, a sophisticated interface engineering technique was employed, where the first 0.3 nm of each layer was grown with a high-flux low-energy ion assistance and the remaining part was grown with a slightly higher ion energy. This method was demonstrated to largely eliminate the intermixing while maintaining the smoothening effect of ion assistance. Two Ni/V multilayer soft X-ray mirror structures, one with 500 periods designed for near-normal incidence and one 150 periods reflecting polarizer at the Brewster angle, were grown utilizing the interface engineering concept. Both the near-normal incidence reflectivity as well as polarizability were improved by a factor of 2 as compared to previously reported data for an X-ray energy of E = 511 eV.     

Effect of muscle,ageing time and modified atmosphere packaging conditions on the colour,oxidative and microbiological stability of packed beef

The objective of this study was to evaluate the influence of two different vacuum ageing times (7 and 14 days) and the impact of the modified atmosphere packaging (MAP) configuration (gas/product ratios: 0.5 and 1 and gas composition: 70% O₂ + 30% CO₂ and 40% O₂ + 30% CO₂ + 30% N₂) on the quality of fresh beef during subsequent storage at 4 °C. For this purpose, three separate experiments were performed. For each experiment, two different muscles (Longissimus dorsi and Biceps femoris) were sampled from four double‐muscled Belgian Blue beef carcasses. Next to colour, also the evolution in microbial load, pH, O₂ and CO₂ in the headspace and lipid oxidation at the meat surface were evaluated. A vacuum ageing for 14 days compared with 7 days resulted in a higher initial microbial load on the day of MAP packaging, which resulted finally in a significantly shorter shelf life. This ageing effect was less pronounced on the colour stability and lipid oxidation of the meat samples. No significant influence of the packaging configuration on any of the analysed parameters (colour, microbial load, pH and lipid oxidation at the meat surface) was observed.     

Effects on milk urea concentration,urine output,and drinking water intake from incremental doses of potassium bicarbonate fed to mid-lactation dairy cows

Large variation exists in the potassium content of dairy cow feeds and also within a feed type due to soil type and fertilization. Increased ration K concentration causes a subsequent increase in urinary volume and could be expected to also lower milk urea concentration. Six multiparous mid-lactation Swedish Red dairy cows, all fitted with rumen cannulas, were subjected to 3 different levels of K intake in a Latin square experiment with three 2-wk periods to evaluate the effects on concentrations of milk urea and rumen ammonia, urinary output, and drinking water intake. The treatments were achieved by K supplementation on top of a low-K basal ration fed at individual allowances fixed throughout the experiment. The basal ration, consumed at 20.2 kg of dry matter (DM)/d, provided 165 g of crude protein/kg of DM and consisted of grass silage, concentrates, and urea in the proportions 39.3:60.0:0.7 on a DM basis. Potassium bicarbonate supplementation was 0, 616, and 1,142 g/d, respectively, to give total ration K concentrations that were low (LO; 12 g/kg of DM), medium (MED; 23 g/kg of DM), or high (HI; 32 g/kg of DM). Production and composition of milk was not affected by treatment. A linear effect on milk urea concentration was detected, being 4.48, 4.18, and 3.77 mM for LO, MED, and HI, respectively, and a linear tendency for rumen ammonia concentration with 6.65, 6.51, and 5.84 mg of NH₃-N/dL for LO, MED, and HI, respectively. Milk urea concentration peaked about 3 h after the rumen ammonia peak from the morning feeding, at a level 1.3 mM over the baseline. Urinary urea excretion declined linearly (105, 103, and 98 g of urea-N/d for LO, MED, and HI, respectively). Linear increases occurred in urinary output (0.058 ± 0.001 kg of urine/g of K intake; no intercept; coefficient of determination = 0.997) and drinking water intake (65.9 ± 2.02 + 0.069 ± 0.004 kg of water/g of K intake; coefficient of determination = 0.95). Urinary K concentration leveled off at 12.4 g/L. Urinary creatinine excretion was not affected by K addition, but allantoin excretion increased linearly by 27% from LO to HI, suggesting increased rumen microbial growth. Rumen pH, acetate proportion of total volatile fatty acids, and digestibility of DM, organic matter, and neutral detergent fiber increased linearly with increasing potassium intake. We concluded that increased ration K concentration lowers milk urea concentration with a magnitude significant for the interpretation of milk urea values, but other sources of variation, such as sampling time relative to feeding, may be even more important.     

Exploration and exploitation in project-based organizations: Development and diffusion of knowledge at different organizational levels in construction companies

Management studies highlight the importance of an organization's capability to both exploit existing knowledge and technologies for short-term profits and also explore new knowledge and technologies to enhance long-term innovation. Although this paradox recently has received escalating interest in management research, studies dealing with project-levels and project-based organizations (PBOs) are scarce. This conceptual paper discusses how PBOs in the construction industry can manage the exploration/exploitation paradox at different organizational levels. Short-term project focus and decentralization inhibits learning from one point in time and space to another, making it easier to reap the benefits of exploitation than of exploration. Current structural and sequential separation of exploration and exploitation activities at business unit, project portfolio, and project levels do not solve the paradox, due to lack of integrating mechanisms. Hence, PBOs in the construction industry may suffer from inadequate extent of exploration, while the extent of exploitation is not reaching its potential. Cooperative procurement procedures can serve as a basis for facilitating both exploration and exploitation of knowledge and technologies in construction projects.