Influence of cut layer on cutting

The contact of the chip with the tool’s front surface in cutting is analyzed by numerical modeling. The high-pressure zones and buildup at the tool’s contact surface are studied. The influence of plastic instability of the chip surface and vortex deformation modes on tool wear is considered.     

Modification of the surface of GaAs and observation of surface enhanced Raman scattering after the diffusion of indium

The results of studies of the surface of GaAs in the presence of indium and phosphorus surfactants are reported. It is shown that, as a result of their diffusion (annealing) at a temperature of 650–670°C, clusters enriched with indium are formed in the GaAs surface region. The clusters can be seen as bright spots in an image obtained by a scanning electron microscope with the use of an in-lens detector. At the same time, studies of the morphology of this surface with an atomic-force microscope show a decrease in the root-meansquare roughness of the surface after annealing (diffusion), which is indicative of the incorporation of In atoms into the GaAs crystal lattice. The clusters are responsible for changes in the Raman spectra. Specifically, an increase in the signal intensity due to surface-enhanced Raman scattering and a shift of the vibration frequency in the surface region are observed. It is found that cluster formation is defined by the crystallographic orientation of the surface and by the technological conditions of surface preparation.     

Analysis of errors in determining the coordinates of acoustic-emission sources in sheet-steel structures

The main factors influencing the error in determining the coordinates of acoustic-emission (AE) sources have been analyzed. A model that allows determination of the spatial distribution of errors of the coordinates of AE sources has been developed. The dependences of the errors caused by the main influencing factors—the difference of the sensitivities of AE channels, the dimensions of the acoustic antenna, and the dispersion and amplitude of AE pulses—have been determined.     

Development of methods for the decrease in instability of recycling water of conjugated closed-circuit cooling system of HPP

On Russian HPPs, conjugated closed-circuit cooling systems, where purge water is used as initial for water-treatment facilities, are widespread. For this reason, it is impossible to use general methods for the stabilization treatment of recycling water in order to prevent scale formation in the units of a system, namely, turbine condensers and cooling towers. In this paper, the methods for the decrease in the instability of recycling water using the methods of chemical engineering, such as stabilization and synchronization of flows and organization of recycles, are suggested. The results of an industrial experiment on the implementation of stabilization treatment of recycling water by the organization of recycle are given. The experiment was carried out on Kazan CHPP-3. The flow scheme involved the recycle of chemically purified water (CPW) for the heat network make-up to the closed-circuit cooling system. The experiment was carried out at three stages with the gradual change of the consumption of the recycle, namely, 0, 50, and 100 t/h. According to the results of experiments, the reliable decrease in the rate of the sedimentation was recorded on the units of the system, namely, turbine condenser and chimney-type cooling tower. This is caused by two reasons. Firstly, this is periodic excessive concentration of recycling water due to the nonstationary character of inlet and outlet flows. Secondly, this is seasonal (particularly, in the summer period) exceeding of the evaporation coefficient. As a result of stabilization and synchronization of flows and organization of recycles, the quality of clarified and chemically purified water for the heat network make-up increases and the corrosion of iron- and copper-containing structural materials decreases. A natural decrease in temperature drop on the operating turbine condensers is mentioned.     

Change in internal friction in coated specimens during wear

The present paper is devoted to the laws of change in the vibration decrement in the process of wear of high-strength coatings and the effect of its restoration in heating of coated specimens damaged to various degrees under friction. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 5–7, May, 1998.     

Bioactive coatings based on nanodiamond-modified epoxy siloxane sols for stone materials

Using a sol-gel process, we have prepared bioactive organic-inorganic hybrid coatings based on epoxy siloxane sols modified with detonation nanodiamond. The microstructure of the coatings was studied by scanning electron microscopy. The coatings were tested—under both laboratory and urban conditions—for bioactivity against the mold fungi most frequently encountered in the air in large cities. The results suggest that such coatings are potentially attractive for protecting historic monuments from biodeterioration.     

Radiation-epidemiological studies of thyroid cancer incidence in Russia after the Chernobyl accident (estimation of radiation risks, 1991-2008 follow-up period)

This study presents an analysis of the thyroid cancer incidence in the population of the most contaminated territories of Bryansk, Kaluga, Oryol and Tula oblasts affected by the Chernobyl accident. The follow-up period is 1991-2008, and the cohort size is 309 130 people. For that period 978 thyroid cancer cases were detected. The excess relative risk per 1 Gy (ERR/Gy) is found to be statistically significant for children and adolescents (0-17 y of age) at the time of the Chernobyl accident (ERR/Gy=3.22; 95 % confidence interval (1.56; 5.81). In boys, the ERR/Gy was higher than in girls -6.54 and 2.24, respectively. A statistically significant decrease in ERR/Gy with time since exposure, by a factor of 0.37 per 10 y, was observed for the whole cohort and for boys separately, but not for girls. No radiation risks of a thyroid cancer among people of 18 y of age at exposure and older were found.     

Influence of annealing on magnetic, relaxation and structural properties of composite and multilayer films

This work is devoted to the research of influence of annealing to ferromagnetic resonance (FMR) properties of films of the A, B series with the compositions of (Co45-Fe45-Zr10)x(Al2O3)y, multilayer films of the D series with compositions {[(Co45-Fe45-Zr10)x(Al2O3)y]-[alpha-Si]}120 and revealing their relationship with the nanostructure characteristics. The films were obtained in an argon atmosphere (the A, D series) and with addition of oxygen (the B series). All samples were deposited on substrates by the ion-beam sputtering method and were annealed. The resonant fields and width of ferromagnetic resonance (FMR) line were measured before and after annealing. The changes in the FMR field and width of the line at varying temperatures of annealing for the composite and multilayer films are analyzed in the work. The character of changes in the structural characteristics of films at different annealing temperatures is determined.     

Solid oxide fuel cell composite cathodes based on perovskite and fluorite structures

This work presents the results related to the functionally graded fluorite (F)-perovskite (P) nanocomposite cathodes for IT SOFC. Nanocrystalline fluorites (GDC, ScCeSZ) and perovskites (LSrMn, LSrFNi) were synthesized by Pechini method. Nanocomposites were prepared by the ultrasonic dispersion of F and P powders in isopropanol with addition of polyvinyl butyral. Different techniques for deposition and sintering of functionally graded cathode materials were applied including traditional approaches as well as original methods, such as radiation-thermal sintering under electron beam or microwave radiation. Morphology, microstructure and elemental composition of nanocomposites was characterized by XRD and HRTEM/SEM with EDX. Even for dense composites, the sizes of perovskite and fluorite domains remain in the nanorange providing developed P-F interfaces. Oxygen isotope heteroexchange and conductivity/weight relaxation studies demonstrated that these interfaces provide a path for fast oxygen diffusion. The redistribution of the elements between P and F phases in nanocomposites occurs without formation of insulating zirconate phases. Button-size fuel cells with nanocomposite functionally graded cathodes, thin YSZ layers and anode Ni/YSZ cermet (either bulk or supported on Ni-Al foam substrates) were manufactured. For optimized composition and functionally graded design of P-F nanocomposite cathodes, a stable performance in the intermediate temperature range with maximum power density up to 0.5 W cm⁻² at 700 °C in wet H₂/air feeds was demonstrated.