Combustion of Ytterbium Metal

Ytterbium metal powder burns with a luminous vapor phase diffusion flame in oxygen. Consolidated stoichiometric mixtures with both polytetrafluoroethylene and hexachloroethane upon ignition yield intense luminous flames. With UV/Vis spectroscopy of the combustion flames Yb, YbO, YbCl, and YbF species have been identified contributing to the selective emission in the green spectral range. The flame temperatures of ytterbium combustion in oxygen and with halocarbon based oxidizers are in the same range as for comparable magnesium based systems.     

Combination of tagging and tissue phase mapping to accelerate myocardial motion measurements in three directions

Object

Until now, a three-directional velocity field has mostly been obtained by velocity encoding in three directions, which is very time-consuming and hence not usually used in clinical routine. We show the feasibility of combining in-plane tagging with through-plane tissue phase mapping (TPM) to encode a three-directional velocity field at 3 T with reduced overall acquisition time.

Materials and methods

Assessment of a three-directional velocity field was performed for 10 healthy volunteers. The motion patterns obtained by use of five different sequences including three-directional TPM, TPM in the through-plane direction, TPM in the through-plane direction with horizontal or vertical tagging lines, and TPM in the through-plane direction combined with a tagging grid were evaluated and compared.

Results

A three-dimensional velocity field can be obtained in approximately half the acquisition time by combining through-plane TPM with in-plane tagging. Although the velocity information is derived by different means, differences between the information obtained by three-directional TPM encoding and the suggested technique are only minor.

Conclusion

The combination of tagging and TPM enables assessment of the three-directional velocity field in nearly half the time taken when the conventional three-directional TPM sequence is used.     

Powder Injection Molding – An innovative manufacturing method for He-cooled DEMO divertor components

At Karlsruhe Institute of Technology (KIT), a He-cooled divertor design for future fusion power plants has been developed. This concept is based on the use of modular cooling fingers made from tungsten and tungsten alloy, which are presently considered the most promising divertor materials to withstand the specific heat load of 10 MW/m². Since a large number of the finger modules (n > 250,000) are needed for the whole reactor, developing a mass-oriented manufacturing method is indispensable. In this regard, an innovative manufacturing technology, Powder Injection Molding (PIM), has been adapted to W processing at KIT since a couple of years. This production method is deemed promising in view of large-scale production of tungsten parts with high near-net-shape precision, hence, offering an advantage of cost-saving process compared to conventional machining.The complete technological PIM process for tungsten materials and its application on manufacturing of real divertor components, including the design of a new PIM tool is outlined and, results of the examination of the finished product after heat-treatment are discussed. A binary tungsten powder feedstock with a solid load of 50 vol.% was developed and successfully tested in molding experiments. After design, simulation and manufacturing of a new PIM tool, real divertor parts are produced. After heat-treatment (pre-sintering and HIP) the successful finished samples showed a sintered density of approximately 99%, a hardness of 457 HV0.1, a grain size of approximately 5 μm and a microstructure without cracks and porosity.     

Coatings on Glass–Ceramic Granules for Dental Restorative Biomaterials

Two methods for coating glass–ceramic granules have been tested: self-assembly in aqueous solutions and the fluidized-bed technique. Both methods have been successfully used to produce nanocoatings on leucite–fluoroapatite glass–ceramic granules. Two chemical substances were developed for the experiments: (a) a combination of inorganic and organic compounds, (b) organic compounds alone, preferably comb polymers. Both groups of materials positively influenced the sintering properties of the glass–ceramics, because they suppressed tearing. The glass–ceramics were used to produce powder compacts for veneering materials, which would be used on metal frameworks (primarily multiunit dental bridges). With regard to the processing of the aqueous slurry, coatings with inorganic and organic substances are preferred.     

Heat Transfer Coefficients for Turbulent Flow in Concentric Annular Ducts

On the basis of a large number of experimental data from the literature, correlations were developed for the heat transfer coefficient for turbulent flow in concentric annular ducts. A proven correlation for heat transfer in circular tubes was extended by factors that take into consideration the effect of the diameter ratio of the annulus and the different boundary conditions for heating or cooling.     

The Berlin Brain-Computer Interface: EEG-based communication without subject training.

The Berlin Brain-Computer Interface (BBCI) project develops a noninvasive BCI system whose key features are 1) the use of well-established motor competences as control paradigms, 2) high-dimensional features from 128-channel electroencephalogram (EEG), and 3) advanced machine learning techniques. As reported earlier, our experiments demonstrate that very high information transfer rates can be achieved using the readiness potential (RP) when predicting the laterality of upcoming left- versus right-hand movements in healthy subjects. A more recent study showed that the RP similarily accompanies phantom movements in arm amputees, but the signal strength decreases with longer loss of the limb. In a complementary approach, oscillatory features are used to discriminate imagined movements (left hand versus right hand versus foot). In a recent feedback study with six healthy subjects with no or very little experience with BCI control, three subjects achieved an information transfer rate above 35 bits per minute (bpm), and further two subjects above 24 and 15 bpm, while one subject could not achieve any BCI control. These results are encouraging for an EEG-based BCI system in untrained subjects that is independent of peripheral nervous system activity and does not rely on evoked potentials even when compared to results with very well-trained subjects operating other BCI systems.