Impact of breakfast on daily energy intake - an analysis of absolute versus relative breakfast calories

Objective  

The role of breakfast energy in total daily energy intake is a matter of debate. Acute feeding experiments demonstrated that high breakfast energy leads to greater overall intake supported by cross-sectional data of a free-living population. On the other hand, a large intraindividual analysis has indicated that a high proportion of breakfast to overall intake is associated with lower daily energy intake. To evaluate these apparently contradictory results in greater detail both ways of analysis were applied to the same data set of dietary records.     

Carbon nanowalls deposited by inductively coupled plasma enhanced chemical vapor deposition using aluminum acetylacetonate as precursor

Well aligned carbon nanowalls, a few nanometers thick, were fabricated by continuous flow of aluminum acetylacetonate (Al(acac)₃) without a catalyst, and independent of substrate material. The nanowalls were grown on Si, and steel substrates using inductively coupled plasma-enhanced chemical vapor deposition. Deposition parameters like flow of argon gas and substrate temperature were correlated with the growth of carbon nanowalls. For a high flow of argon carrier gas, an increased amount of aluminum in the film and a reduced lateral size of the carbon walls were found. The aluminum is present inside the carbon nanowall matrix in the form of well crystallized nanosized Al₄C₃ precipitates.     

Emergent membrane-affecting properties of BSA-gold nanoparticle constructs

By adsorbing bovine serum albumin (BSA) on gold nanoparticles (Aunps) with diameters 30 nm and 80 nm, different degrees of protein unfolding were obtained. Adsorption and adlayer conformation were characterized by UV-vis spectroscopy, ζ-potential measurements, steady-state and time-resolved fluorescence. The unfolding was also studied using 1-anilino-8-naphthalene sulfonate (ANS) as an extrinsic probe, showing that BSA unfolds more on 80 nm Aunp than on 30 nm Aunp. Langmuir monolayer studies using two distinct methods of introducing the BSA and BSA-Aunp constructs accompanied with Brewster Angle Microscopy (BAM) and Digital Video Microscope (DVM) imaging demonstrated that BSA-Aunp constructs induce film miscibility with L-α-phosphatidylethanolamine not seen for BSA or Aunp alone. The changes induced by partial unfolding clearly give better film-penetration ability, as well as disruption of liquid crystalline domains in the film, thereby inducing film miscibility. Gold or protein only does not possess the nanoscale film-affecting properties of the protein-gold constructs, and as such the surface-active and miscibility-affecting characteristics of the BSA-Aunp represent emergent qualities.     

Entwicklung einer leistungsstarken Mikrorektifikationsapparatur für analytische und präparative Anwendungen

In this contribution it is reported about the realization of efficient micro rectification equipment (MRA), which can be operated intermittently or continuously and be used both for analytical as well as for preparative separations of mixtures of liquid substances. Different binary systems were separated. A theoretical separation stage number of 12 was obtained together with a height equivalent to one theoretical plate of 1.08 cm. Compared to the state of microtechnology this can be regarded as an excellent progress.     

Katalysatoruntersuchungen an einer Technikumsanlage für Biomasse‐Kleinfeuerungen

In addition to the reduction of particulate matter, a catalytic supported emission reduction in small scale biomass combustion systems can also enable a conversion of toxic organic components into carbon dioxide and water. For catalyst investigations under practical conditions a special test facility was designed. The results show that products of incomplete combustion like carbon monoxide from stoves can be reduced by catalytic processes. Further developments and studies are necessary to achieve the targeted emission limits.     

Bacterial Catabolism of Biphenyls: Synthesis and Evaluation of Analogues

A series of alkylated 2,3‐dihydroxybiphenyls has been prepared on the gram scale by using an effective Directed ortho Metalation–Suzuki–Miyaura cross‐coupling strategy. These compounds have been used to investigate the substrate specificity of the meta‐cleavage dioxygenase BphC, a key enzyme in the microbial catabolism of biphenyl. Isolation and characterization of the meta‐cleavage products will allow further study of related processes, including the catabolism of lignin‐derived biphenyls.     

Imazalil Degradation upon Applying Ozone—Transformation Products,Kinetics, and Toxicity of Treated Aqueous Solutions

The elimination of the pesticide imazalil (IMZ) spiked into ultrapure water as well as into wastewater applying ozone (O₃) and the identification of transformation products was investigated. O₃ under hydroxyl radical suppression conditions reacted rapidly with the aliphatic double bond or the imidazole ring in IMZ, yielding several transformation products by partial oxidation. The structures of four oxidation products not yet described were characterized and identified after liquid chromatography coupled with high resolution, high mass accuracy, mass and tandem mass spectrometry (LC/MS and -MSⁿ) in ultrapure water. For two identified transformation products, generated via direct ozone attack on IMZ, formation pathways were proposed. In wastewater, only two of those transformation products were observed. Kinetics studies for the reaction of IMZ with O₃, evaluated by the competition kinetic method, resulted in a second-order rate constant k_O3,IMZ ～ (1.02 ± 0.03)?×?10⁵ M^?1 s^?1 at pH 6.6 ± 0.2, indicating that IMZ is completely transformed during the ozonation process. Tests of acute toxicity were performed applying a solution of IMZ in ultrapure water or treated wastewater to Daphnia magna. In both cases the decrease of toxicity was observed after ozone treatment.     

Spherulite Growth Rate in Polypropylene/Silica Nanoparticle Composites: Effect of Particle Morphology and Compatibilizer

Spherical and tube‐like (TL) silica nanoparticles were melt blended with an isotactic polypropylene (PP) matrix and its effect on the isothermal spherulite growth rate was analyzed by polarized optical microscope. The addition of low amount (≈1 wt.‐%) of either 15 nm spherical or TL particles raises the spherulite growth rate and the nucleation density of spherulites. Samples prepared with silica spheres of 80 nm otherwise do not show any change in the crystallization behavior. By adding a compatibilizer, both the nucleation density and the spherulite growth rate of the pure polymer are increased. Noteworthy, although the nanoparticles do not further increase the nucleation density of the PP/compatibilizer blend, independent of its form and size, they cause a decrease in its spherulite growth rate.

     

Water sorption in poly(vinyl alcohol) membranes: An experimental and numerical study of solvent diffusion in a crosslinked polymer

The development of reliable mathematical models for mass transport in crosslinked polymers and their thorough experimental validation are of substantial interest in the design of technical membrane processes or the assessment of polymer performance when applications such as functional films and protective coatings are concerned.The present study aims at the joint experimental and numerical characterisation of mass transport during water vapour sorption into physically crosslinked poly(vinyl alcohol) membranes. A mathematical model comprising both phase equilibrium and the respective mass transport mechanisms is proposed and verified by means of in situ sorption kinetic measurements. Drawing on the independent determination of equilibrium solvent uptake, the comparison of model calculations and experimental sorption data demonstrates that water transport in the crosslinked polymer membrane is successfully described by pure Fickian diffusion with a simple exponential expression for the solvent diffusion coefficient to account for its pronounced concentration dependency, allowing the latter to be specified quantitatively.