New look on relay selection strategies for full-duplex multiple-relay NOMA over Nakagami-m fading channels

Wireless Networks - By removing the orthogonal use of radio-resources, non-orthogonal multiple access (NOMA) has been introduced to improve the spectral efficiency of fifth generation (5G) and...     

Quantum‐Tunneling Metal‐Insulator‐Metal Diodes Made by Rapid Atmospheric Pressure Chemical Vapor Deposition

A quantum‐tunneling metal‐insulator‐metal (MIM) diode is fabricated by atmospheric pressure chemical vapor deposition (AP‐CVD) for the first time. This scalable method is used to produce MIM diodes with high‐quality, pinhole‐free Al₂O₃ films more rapidly than by conventional vacuum‐based approaches. This work demonstrates that clean room fabrication is not a prerequisite for quantum‐enabled devices. In fact, the MIM diodes fabricated by AP‐CVD show a lower effective barrier height (2.20 eV) at the electrode–insulator interface than those fabricated by conventional plasma‐enhanced atomic layer deposition (2.80 eV), resulting in a lower turn on voltage of 1.4 V, lower zero‐bias resistance, and better asymmetry of 107.     

Optimization of an RFID location identification scheme based on the neural network

An indoor localization technology is increasingly critical as location‐aware applications evolve. Researchers have proposed several indoor localization technologies. Because most of the proposed indoor localization technologies simply involve using the received signal strength indicator value of radio‐frequency identification (RFID) for indoor localization, radio‐frequency interference, and environmental factors often limit the accuracy of localization results. Therefore, this study proposes an accurate RFID localization based on the neural network (ARL‐N²), a passive RFID indoor localization scheme for identifying tag positions in a room, combining a location identification based on dynamic active RFID calibration algorithm with a backpropagation neural network (BPN). The proposed scheme composed of two phases: in the training phase, an appropriate BPN architecture is constructed using the training data derived from the coordinates of reference tags and the coordinates obtained using the localization algorithm. By contrast, the online phase involves calculating the tracking tag coordinates and using these values as BPN inputs, thereby enhancing the estimated location. A performance evaluation of the ARL‐N² schemes confirms its high localization accuracy. The proposed method can be used to locate critical objects in difficult‐to‐find areas by creating minimal errors and applying and economical technique. Copyright © 2013 John Wiley & Sons, Ltd.     

Low-power-consumption and high-gain CMOS distributed amplifiers using cascade of inductively coupled common-source gain cells for UWB systems

A distributed amplifier with new cascade inductively coupled common-source gain-cell configuration is presented. Compared with other existing gain-cell configurations, the proposed cascade common-source gain cell can provide much higher transconductance and, hence, gain. The new distributed amplifier using the proposed gain-cell configuration, fabricated via a TSMC 0.18-/spl mu/m CMOS process, achieves an average power gain of around 10 dB, input match of less than -20 dB, and noise figure of 3.3-6.1 dB with a power consumption of only 19.6 mW over the entire ultra-wideband (UWB) band of 3.1-10.6 GHz. This is the lowest power consumption ever reported for fabricated CMOS distributed amplifiers operating over the whole UWB band. In the high-gain operating mode that consumes 100 mW, the new CMOS distributed amplifier provides an unprecedented power gain of 16 dB with 3.2-6-dB noise figure over the UWB range.     

Very large temperature-induced absorptive loss in high Te-containing chalcogenide fibers

The change in the absorption loss relative to room temperature of the infrared (IR)-transmitting Ge/sub 15/As/sub 35/Se/sub (50-x)/Te/sub x/ glass fibers in the temperature range of -110/spl deg/C/spl les/T/spl les/110/spl deg/C was investigated. The attenuation increased significantly at T/spl ges/40/spl deg/C. This is mainly attributed to thermally activated free carriers associated with the semimetallic character of the Te atom. For /spl lambda//spl les/4.2 /spl mu/m, the loss due to electronic and free-carrier absorption was strongly affected by temperature. In the wavelength region of 5-11 /spl mu/m, the loss was mainly due to free-carrier absorption. Beyond /spl lambda//spl ges/11 /spl mu/m, multiphonon absorption dominated the loss spectrum at T/spl les/60/spl deg/C while free-carrier absorption contributed mainly to the total loss at T/spl ges/80/spl deg/C.     

High-mobility low band-to-band-tunneling strained-Germanium double-gate heterostructure FETs: Simulations

Large band-to-band tunneling (BTBT) leakage currents can ultimately limit the scalability of high-mobility (small-bandgap) materials. This paper presents a novel heterostructure double-gate FET (DGFET) that can significantly reduce BTBT leakage currents while retaining its high mobility, making it suitable for scaling into the sub-20-nm regime. In particular, through one-dimensional Poisson-Schrodinger, full-band Monte Carlo, and detailed BTBT simulations, the tradeoffs between carrier transport, electrostatics, and BTBT leakage in high-mobility sub-20-nm Si-strained SiGe-Si (high germanium concentration) heterostructure PMOS DGFETs are thoroughly analyzed. The results show a dramatic (>100/spl times/) reduction in BTBT and an excellent electrostatic control of the channel while maintaining very high drive currents and switching frequencies in these nanoscale transistors.     

Fuzzy sliding-mode controllers with applications

This paper concerns the design of robust control systems using sliding-mode control that incorporates a fuzzy tuning technique. The control law superposes equivalent control, switching control, and fuzzy control. An equivalent control law is first designed using pole placement. Switching control is then added to guarantee that the state reaches the sliding mode in the presence of parameter and disturbance uncertainties. Fuzzy tuning schemes are employed to improve control performance and to reduce chattering in the sliding mode. The practical application of fuzzy logic is proposed here as a computational-intelligence approach to engineering problems associated with sliding-mode controllers. The proposed method can have a number of industrial applications including the joint control of a hydraulically actuated mini-excavator as presented in this paper. The control hardware is described together with simulated and experimental results. High performance and attenuated chatter are achieved. The results obtained verify the validity of the proposed control approach to dynamic systems characterized by severe uncertainties     

A wavelet-based interpolation-restoration method for superresolution (wavelet superresolution)

Superresolution produces high-quality, high-resolution images from a set of degraded, low-resolution images where relative frame-to-frame motions provide different looks at the scene. Superresolution translates data temporal bandwith into enhanced spatial resolution. If considered together on a reference grid, given low-resolution data are nonuniformly sampled. However, data from each frame are sampled regularly on a rectangular grid. This special type of nonuniform sampling is called interlaced sampling. We propose a new wavelet-based interpolation-restoration algorithm for superresolution. Our efficient wavelet interpolation technique takes advantage of the regularity and structure inherent in interlaced data, thereby significantly reducing the computational burden. We present one- and two-dimensional superresolution experiments to demonstrate the effectiveness of our algorithm.This work was supported in part by the National Science Foundartion Grant CCR-9984246.     

A Backside-Illuminated Image Sensor With 200 000 Pixels Operating at 250 000 Frames per Second

In this paper, a high-speed image sensor with very high sensitivity is developed. The high sensitivity is achieved by introduction of backside illumination and charge-carrier multiplication (CCM). The high frame rate is guaranteed by installing the in situ storage image sensor (ISIS) structure on the front side. A test sensor of the BSI-ISIS has been developed and evaluated. It is shown that an image with a very low signal level embedded under the noise floor is recognizable by activating the CCM.     

LCD motion blur reduction: a signal processing approach.

Liquid crystal displays (LCDs) have shown great promise in the consumer market for their use as both computer and television displays. Despite their many advantages, the inherent sample-and-hold nature of LCD image formation results in a phenomenon known as motion blur. In this work, we develop a method for motion blur reduction using the Richardson-Lucy deconvolution algorithm in concert with motion vector information from the scene. We further refine our approach by introducing a perceptual significance metric that allows us to weight the amount of processing performed on different regions in the image. In addition, we analyze the role of motion vector errors in the quality of our resulting image. Perceptual tests indicate that our algorithm reduces the amount of perceivable motion blur in LCDs.