Potential-time measurements on mild steel in etch primer solutions

Experiments were carried out in a two pack system; polyvinyl butyral, zinc tetroxychromate in one pack, and phosphoric acid in the other with an isopropanol solvent in both packs. This study examines the functions of the phosphoric acid and the chromate containing pigment separately by utilising the feature that the alcohol dispersed components have sufficient conductivity to carry out potential-time measurements in the wet components before and during mixing.     

Addressing substrate coupling in mixed-mode ICs: simulation andpower distribution synthesis

This paper describes new techniques for the simulation and power distribution synthesis of mixed analog/digital integrated circuits considering the parasitic coupling of noise through the common substrate. By spatially discretizing a simplified form of Maxwell's equations, a three-dimensional linear mesh model of the substrate is developed. For simulation, a macromodel of the fine substrate mesh is formulated and a modified version of SPICE3 is used to simulate the electrical circuit coupled with the macromodel. For synthesis, a coarse substrate mesh, and interconnect models are used to couple linear macromodels of circuit functional blocks. Asymptotic Waveform Evaluation (AWE) is used to evaluate the electrical behavior of the network at every iteration in the synthesis process. Macromodel simulations are significantly faster than device level simulations and compare accurately to measured results. Synthesis results demonstrate the critical need to constrain substrate noise and simultaneously optimize power bus geometry and pad assignment to meet performance targets     

Photonic packet switches: architectures and experimentalimplementations

Photonic packet switches offer high speed, data rate and format transparency, and flexibility required by future computer communications and cell-based telecommunications networks. In this paper, we review experimental progress in state-of-the-art photonic packet switches with an emphasis on all-optical guided-wave systems. The term all-optical implies that the data portion of a packet remains in optical format from the source to the destination. While the data remain all-optical, both optical and optoelectronic techniques have been used to process packet routing functions based on extremely simple routing protocols. An overview of the design issues for all-optical photonic packet switching is given and contrasted with electronic packet switch implementations. Low-level functions that have been experimentally implemented include routing, contention resolution, synchronization, and header regeneration. System level demonstrations, including centralized photonic switching and distributed all-optical multihop networks, will be reviewed     

ACT3: a high-speed, high-precision electrical impedance tomograph

Presents the design, implementation, and performance of Rensselaer's third-generation adaptive current tomograph, ACT3. This system uses 32 current sources and 32 phase-sensitive voltmeters to make a 32-electrode system that is capable of applying arbitrary spatial patterns of current. The instrumentation provides 16 b precision on both the current values and the real and reactive voltage readings and can collect the data for a single image in 133 ms. Additionally, the instrument is able to automatically calibrate its voltmeters and current sources and adjust the current source output impedance under computer control. The major system components are discussed in detail and performance results are given. Images obtained using stationary agar targets and a moving pendulum in a phantom as well as in vivo resistivity profiles showing human respiration are shown     

Modified FSS response from two sided and closely coupled arrays

A demonstration is presented of a way in which an affected FSS response can be achieved using a two sided structure of dipole arrays sharing the same dielectric layer. Even with these simple elements the results produced resonances well below the grating lobe region, and consequently the instability of these with oblique angles of incidence (up to 75°) was less than 1%. The key to this work was the high coupling between the arrays that was achieved by a relative displacement     

QDA-a method for systematic informal program analysis

Formal verification of program properties may be infeasible or impractical, and informal analysis may be sufficient. Informal analysis involves the informal acceptance, by inspection, of the validity of program properties or steps in an analysis. Informal analysis may also involve abstraction. Abstraction can be used to eliminate details and concentrate on more general properties. Abstraction will result in informal analysis if it includes the use of undefined properties. A systematic, informal method for analysis called QDA (Quick Defect Analysis) is described. QDA is a comments analysis process based on facts and hypotheses. Facts are used to create an abstract program model, and hypotheses are selected, nonobvious program properties which are identified as needing verification. Hypotheses are proved from the facts that define an abstraction. QDA is hypothesis-driven in the sense that only those parts of an abstraction that are needed to prove hypotheses are created. The QDA approach was applied to a previously well tested operational flight program (OFP). The QDA method and the results of the OFP experiment are presented. The problems of incomplete or unsound informal analysis are analyzed, the relationship of QDA to other analysis methods is discussed, and suggested improvements to the QDA method are described     

Red blood cell glutathione status in patients with gastrointestinal malignancies treated with 5-fluorouracil

As an alternative to surgical splenectomy, partial splenic embolization was performed in seven children for hypersplenism manifested by splenomegaly, thrombocytopenia, leukopenia, and erythrocyte hemolysis. Within a few days, platelet and leukocyte counts rose significantly in all patients and were maintained in six of seven patients during a follow-up period of 9 to 69 months. Spleen size and abdominal distention also decreased significantly in all children. There were no infectious complications.     

Studies on the action of interleukin-1 on term human fetal membranes and decidua

The present study describes the development of an enzyme-linked immunosorbent assay capable of quantifying serum antibody of all four canine IgG subclasses. A panel of subclass-restricted and subclass-specific monoclonal antibodies was used to measure IgG subclasses in the serum of healthy dogs, as well as in dogs with a range of clinical diseases. The subclasses have been redefined as IgG1, IgG2, IgG3 and IgG4 based on a comparison with the relative concentration and electrophoretic mobilities of human IgG subclasses. In serum samples from healthy dogs, the concentration of IgG1 (mean, 8.17 +/- 0.95 mg ml-1) and IgG2 (mean, 8.15 +/- 3.16 mg ml-1) were very similar and considerably higher than the levels of IgG3 (mean, 0.36 +/- 0.43 mg ml-1) and IgG4 (mean, 0.95 +/- 0.45 mg ml-1). There was no apparent difference in the level of subclasses between the different breeds comprising this normal population. Sera from dogs with a range of immune-mediated or inflammatory diseases all had markedly elevated levels of IgG2 (more than 13 mg ml-1), but IgG1 decreased (less than 4 mg ml-1) to levels below the normal range.     

Seismic response of structures with supplemental damping

This paper presents a review of supplemental damping devices used for the control of the seismic response of structures. The mechanical properties of these devices are discussed and considerations in the design of energy absorbing systems are presented.