K-winner networks.

A special class of mutually inhibitory networks is analyzed, and parameters for reliable K-winner performance are presented. The network dynamics are modeled using interactive activation, and results are compared with the sigmoid model. For equal external inputs, network parameters that select the units with the larger initial activations (the network converges to the nearest stable state) are derived. Conversely, for equal initial activations, networks that select the units with larger external inputs (the network converges to the lowest energy stable state) are derived. When initial activations are mixed with external inputs, anomalous behavior results. These discrepancies are analyzed with several examples. Restrictions on initial states are derived which ensure accurate K-winner performance when unequal external inputs are used.     

Langmuir-Blodgett deposited cadmium gate inverted InP-GaInAs modulation-doped field-effect transistors

We report on the Langmuir-Blodgett film deposition and plasma etching of cadmium distearate on n-Gao.47Ino.53As to form a high-barrier-height Schottky barrier. Using this technique to form the gate electrode, we fabricated a 1?m-gate-length inverted InP-GalnAs modulation-doped field-effect transistor (MODFET) with an extrinsic transconductance of 170mS/mm and a cutoff frequencyfT of 19 GHz.     

Intercomparison of scanning probe microscopes

Comparison measurements on reference standards are reported in which 13 partners with different instruments took part. A set of prototype standards which had been produced and calibrated within a European project were used for the measurements. Here, results of measurements on a 240 nm step height standard and a two-dimensional lateral standard with a nominal pitch of 1 μm are reported.     

Parameter extraction on MOSFET transistors using a new optimised fit strategy

Classical parameter-extraction programs rely on the minimisation of the relative current deviation. However, since, especially for analogue applications, the slope of the IDS/VDS curve in the saturation region is at least equally important, a new fit strategy has been developed. This new fit strategy extracts a parameter set which optimises the current residual as well as the slope residual at every point.     

Half-bridge inverter using 4H-SiC gate turn-off thyristors

This paper reports on the first demonstration of a half-bridge power inverter constructed from silicon carbide gate turn-off thyristors (GTOs) operated in the conventional GTO mode. This circuit was characterized with input bus voltages of up to 600 VDC and 2 A (peak current density of 540 A/cm²) with resistive loads using a pulse-width modulated switching frequency of 2 kHz. We discuss the implications of the thyristor's electrical characteristics and the circuit topology on the overall operation of the half-bridge circuit. This work has determined the conservative critical rate of rise value of the off-state voltage to be 200 V/μs in these devices     

Opposed jet flames of lean or rich premixed propane-air reactants versus hot products

Several opposed jet flames, produced by a lean H₂-air jet opposing a rich or lean C₃H₈-air jet, are investigated. Spontaneous Raman spectroscopy is used for major species concentration and temperature measurements along the opposed jet centerline. The hot products of the H₂-air flame simulate the burnt gases of strong-burning near-stoichiometric reactants as they impinge upon a weak-burning lean or rich hydrocarbon-fueled reactant mix, a situation encountered in stratified charge operation of direct injection spark ignition engines. In addition the H₂-air flame hot products facilitate experimental data interpretation through the absence of carbon-bearing species. Good agreement between numerical and experimental data are obtained for a rich (equivalence ratio, φ = 1.25) C₃H₈-air jet versus a lean (φ = 0.4) H₂-air jet. Two lean C₃H₈-air jets (φ = 0.64 or 0.60), versus the φ = 0.4 H₂-air jet, are also investigated. For both of these flames, the amount of CO₂ production strongly depends upon φ, with the φ = 0.64 flame having a peak CO₂ mole fraction an order of magnitude higher than for the φ = 0.60 flame, and the C₃H₈ flames burning either as a normal flame (high CO₂) or as a “negative flame speed” flame producing little CO₂ and then only through diffusion of C₃H₈ into the hot products jet. The numerically predicted and experimental CO₂ profiles agree well for the positive flame speed flame, but the large discrepancy between predicted and measured peak CO₂ in the negative flame speed flame suggests modeling improvements are needed for this type of flame.     

Using bald eagles to indicate the health of the Great Lakes' environment

The bald eagle (Haliaeetus leucocephalus) is one of the most studied birds of North America, and a great amount of natural life‐history information, including the response of various stressors on the eagles' ability to reproduce, are well known. In Michigan, the eagle has been chosen to track the trends of bioaccumulative compounds of concern across watersheds in the state. The state has been divided into major watersheds, and 20% of these are surveyed each year. A control area in northern Minnesota, Voyageurs National Park, is also sampled annually. We report here on the methods used, the preliminary results of the 1999 field season, and how differences in mercury concentrations varied over a 10‐year period. Mercury in feathers of nestling eagles declined over time only in Lakes Michigan and Huron, but have not decreased among other subpopulations in Michigan. Concentrations of polychlorinated biphenyls (PCBs) and 4,4′‐DDE in blood plasma from nestling eagles have declined over time for most subpopulations; however, they remain greater for breeding areas associated with the Great Lakes' food web. Sea eagles of the genus Haliaeetus are a good sentinel species to track trends in bioaccumulative compounds in aquatic systems.     

Harper-dorn creep and specimen size

Under conditions typical of Harper-Dorn (H-D) creep the statistical slip-length may become comparable to, or even exceed, the specimen diameter (a size effect). It is demonstrated that a consequence of such a size effect is that the rates of dislocation storage and dynamic recovery are reduced and the static recovery rate will exceed the dynamic one. Under such conditions, the analysis shows that the creep rate will scale linearly with the applied stress, a characteristic of H-D creep. This article is based on a presentation made in the workshop entitled “Mechanisms of Elevated Temperature Plasticity and Fracture,” which was held June 27–29, 2001, in San Diego, CA, concurrent with the 2001 Joint Applied Mechanics and Materials Summer Conference. The workshop was sponsored by Basic Energy Sciences of the United States Department of Energy.