Effect of pulse time on surface characteristics and corrosion resistance during pulse electrochemical polishing

Pulse electrochemical polishing (PECP) was used to improve the mechanical properties,such as surface roughness and corrosion resistance,of conductive metallic materials.PECP can provide a smooth,bright,reflective,and deburred surface that exhibits superior corrosion resistance.In this work,stainless steel was used as the anode,and copper was used as the cathode due to their low electrical resistances.The surface roughness of the PECP sample was measured by atomic force microscopy (AFM).A scanning electron microscope (SEM) was used to observe surface characteristics,and an Auger electron spectroscope (AES) was used to analyze the metallurgical composition and thickness of the passive film.The aim of this research was to compare the corrosion resistance rates of the unprocessed and PECP-processed stainless steel.     

Evaluation of microstructure and mechanical properties of Mg-xCe-0.5Zn alloys by nano-indentation

The microstructure and mechanical properties of Mg-xCe-0.5Zn(x=0.5,1.5,2.5,molar fraction,%) alloys were examined using a nano-indentation technique.The alloys were fabricated using a vacuum induction melting method under an argon atmosphere. The microstructures of Mg-xCe-0.5Zn alloys mainly consist ofα-Mg and eutectic Mg12Ce phase.The volume fraction and size of the eutectic Mg12Ce phase increase with increasing Ce contents.Nano-indentation test results show that the indentation hardness and elastic modulus of the eutectic Mg12Ce phase are higher than those of theα-Mg matrix.In addition,the mean indentation hardness and elastic modulus of the Mg-xCe-0.5Zn alloys increase with the Ce addition amount increasing.     

Influence of alloying elements on microstructure and microhardness of Mg-Sn-Zn-based alloys

The phase evolution in （88%-91%）Mg-8%Sn-l%Zn-X （X=A1, Mn and/or Ce） system was analyzed via CALPHAD method and simulations were used in precise selection of the chemical composition. The influence of the addition of different alloying elements such as A1, Mn and Ce on the microstructure and microhardness of Mg-8%Sn-l%Zn-based alloys was investigated. Combined addition of A1 and Mn shows features distinct from separate addition of A1 or Mn. Additions of l%AI and l%Mn to base alloy result in the formation of massive A1-Mn phase in a-Mg matrix grains. Addition of Ce element can refme the second eutectic precipitates and form intermetallic compounds with Sn. Fine rod-like Sn-Ce phase presents mainly on the grain boundaries and plays a role in inhibiting grain growth. The effects of alloying elements on Vickers microhardness and indentation size effect of base alloy were examined.     

钛沉积工艺制备TiN/cBN和TiC/金钢石涂层颗粒(英文)

用钛熔盐沉积及热处理工艺分别制备碳化钛涂覆的立方碳化硼颗粒(TiN/cBN)及碳化钛涂覆的金刚石颗粒(TiC/金刚石)。将cBN或金刚石颗粒分别与钛粉和KCl、NaCl和K2TiF6熔盐混合。将所得混合物在Ar气氛中加热至900°C,然后在H2气氛中于1000°C进行热处理。采用扫描电镜、X射线衍射和聚焦离子束技术对所制得颗粒进行表征。结果表明:cBN和金刚石颗粒表面已覆盖了纳米钛层。对Ti/cBN和TiC/金刚石涂层颗粒进行热处理后,颗粒表面沉积的Ti层与cBN和金刚石颗粒发生了原位化学反应,分别转化为钛化合物TiN和TiC。     

船用5052-O铝合金在海水中的力学和电化学性能(英文)

采用电化学实验和SEM表面形貌观察,对船用5052-O铝合金在海水中的腐蚀保护电位进行优化,以克服诸如点蚀、腐蚀、应力腐蚀开裂和氢脆等行为的发生。在外加电流阴极保护的条件下,最优的保护电位范围为-1.3V～-0.7V。在此电位下,试样的腐蚀电流密度较低,经恒电位实验后,试样表面形貌保持得较好。     

CLASSIFICATION OF ON-LINE POULTRY CARCASSES WITH BACKPROPAGATION NEURAL NETWORKS1

A transportable system equipped with an overhead shackle conveying line and a visible/near-infrared (Vis/NIR) spectrophotometer system was assembled and used at a poultry slaughter plant. The reflectance spectra of each poultry carcass hung on the moving shackle was measured with a stationary fiber optic probe, which was set 2 to 5 cm away from the carcass, depending on the size. Reflectance spectra of wholesome and unwholesome poultry carcasses on the moving shackle, set at 60 or 90 birds/min, were measured, either under room light or in a dark environment. The scanning time for each carcass was 0.32 s. Most of the unwholesome poultry carcasses for this study were septicemic and air-sacculitic. The average accuracy in classifying wholesome and unwholesome carcasses was above 94%. All the misclassified carcasses were air-sacculitic. With a shackle speed of 90 birds/min, the highest average accuracy was obtained when the reflectance was measured in the dark (97.5%). The results showed that the accuracy of classification could be improved with the maintenance of a consistent lighting environment. All results indicated the Vis/NIR spectrophotometer system would be a highly accurate, robust tool for on-line, real-time classification of wholesome and unwholesome carcasses.     

EXPERIMENTAL ESTIMATION OF A SCALING EXPONENT FOR TIP VORTEX CAVITATION VIA ITS INCEPTION TEST IN FULL- ANDMODEL-SHIP

Tip vortex cavitation noise of marine propeller became primary concerns to reduce hazardous environmental impacts from commercial ship or to keep the underwater surveillance of naval ships. The investigations of the tip vortex and its induced noise are normally conducted through the model test in a water cavitation tunnel. However the Reynolds number of model-test is much smaller than that of the full-scale, which subsequently results in the difference of tip vortex cavitation inception. Hence, the scaling law between model-and full-scales needs to be identified prior to the prediction and assessment of propeller noise in full scale. From previous researches, it is generally known that the incipient caivtation number of tip vortex can be represented as a power of the Reynolds number. However, the power exponent for scaling, which is the main focus of this research, has not been clearly studied yet. This paper deals with the estimation of scaling exponent based on tip vortex cavitation inception test in both full-and model-scale ships. Acoustical measurements as well as several kind of signal processing technique for an inception criterion suggest the scaling exponent as 0.30. The scaling value proposed in this study shows slight difference to the one of most recent research. Besides, extrapolation of model-ship noise measurement using the proposed one predicts the full-scale noise measurement with an acceptable discrepancy.     

Solubility of Salmon Myosin as Affected by Conformational Changes at Various Ionic Strengths and pH

The relationship between solubility and conformational changes of salmon ( Oncorhynchus tshawytscha ) myofibrillar proteins at various ionic strengths and pH was investigated using myosin as a model system. Solubility of myosin increased with increased KCl concentration up to 0.5M. Further increasing salt concentration resulted in a gradually reduced solubility. In the absence of salt, myosin was slightly soluble at pH>7 or <4. The increased solubility correlated with the increased surface hydrophobicity and relative sulfhydryl content as well as the decreased α-helicity. At KCl >1.0M, myosin regained its helix structure with a concomitant loss of solubility due to the dominant hydrophobic interaction among nonpolar amino acid residues.     

PURIFICATION OF CELLULASE FROM FUSARIUM MONILIFORME AND ITS APPLICATION TO THE PRODUCTION OF RED BEAN STARCH PRECIPITATE

To investigate the effect of cellulase on increase of recovery of red bean starch precipitate, cellulases from Fusarium moniliforme were purified and applied to the production of red bean starch precipitate. Oneã-glucosidase, two filter paper degradation enzymes (FPase), one endo-ã-glucanase (endo-Cx) and one exo-ã-glucanase (exo-Cx) were purified by ammonium sulfate fractionation, gel filtration and ion-exchange chromatography. Optimum temperature and time of submersion of red beans for reduction of hardness was 50°C and 2 h. Maximum sedimentation rate of starch was obtained when the red bean was incubated in a mixture of 0.004 units/mL of FPase and 0.3 units/mL of CMCase, and maximum recovery of red bean starch precipitate was obtained with 0.004 units/mL of FPase and 0.2 units/mL of CMCase. Enzyme treatment reduced suspended solids about 40% in waste water compared with control. A little hydrolysis in cell wall, intercellular space and interstarch granular space was observed.     

A Study of the Heat Transfer Characteristics of an FC-72(C6F14) Two-Phase Closed Thermosyphon with Helical Grooves on the Inner Surface

This study is a fundamental work performed to obtain basic information about designing two-phase closed thermosyphons with a working fluid of FC-72 (C₆F₁₄). FC-72 is a kind of alternative refrigerant designed to be chemically safe and more environmentally friendly than any other conventional CFC refrigerants.

To obtain experimental data on operational performances of a FC-72 two-phase closed thermosyphon, an experimental model was designed and manufactured with a micro fin groove copper tube with an outside diameter of 22.2 mm for its container, on which a series of operational performance tests were conducted. Its maximum capacity of heat transport rate was designed to be about 300–400 W. The focus was given to investigate the effects of such parameters as micro fin grooves and fill charge ratios on operational performances of the FC-72 two-phase closed thermosyphon. The experimental data on phase change heat transfer coefficients and heat transport limitations were compared with some corresponding correlations, and a couple of measures that would help to predict operational performances were suggested with some physical explanations.