The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Virtual reality systems and research on the perception, simulation and presentation of environmental change

The ability of evolving data visualization techniques (e.g. video image-capture technology) to portray realistically both the sensuous and connotative properties of the molar environment and change within the environment has produces an abundance of environmental perception studies using various visualization technologies. Future growth in the application of these technologies to environmental change perception research requires consideration of three sets of issues: (1) the nature of the perceptual experiencing of environment; (2) simulation of thise experience; and (3) presentation of environmental displays to people engaged in the studies.     

Cost-benefit analysis of the use of TBT: the case for a treatment approach

The current climate of hostility towards the use of tributyltin (TBT) as an active ingredient in ship anti-fouling paint appears to be based on a very biased assessment of its environmental impact. While many national and international regulatory agencies are moving towards further restriction, and a complete ban is under active discussion, a number of factors appear to have been ignored. The economic impact of a ban on TBT when no adequate substitute exists could be substantial. Environmentally, consequences would include a substantial increase in the consumption of fossil fuel, with corresponding increases in carbon dioxide and sulphur dioxide emissions; the construction of more vessels; the transfer of ship-building, ship-repairing and ship-breaking activities from well-regulated to unregulated or under-regulated areas in the developing world; and a shift from sea transport to less environmentally acceptable forms of transport. Experience in Europe and other parts of the developed world shows that existing restrictions, where they are properly enforced, are probably adequate to alleviate the environmental damage associated with TBT. Some existing legislation acts to inhibit the search for effective substitutes. The environmental benefits of TBT have been ignored. Little thought has been given to a technical, rather than a legislative solution to controlling TBT inputs to the environment. A method is described for treating TBT-contaminated wastewaters, which has been successfully tested in prototype at full scale. Legislative measures against TBT will do nothing to address the problem of the existing backlog of contaminated material, nor even to permit the IMO proposal for the removal of TBT from all ships by 2008 to be successfully concluded in an environmentally safe manner, since no provision has been made for the disposal of the existing TBT; most probably it will be dumped in environmentally sensitive, unregulated areas in the developing world.     

SEM-EDX analysis in the source apportionment of particulate matter on Hypogymnia physodes lichen transplants around the Cu smelter and former mining town of Karabash, South Urals, Russia

Scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDX) of particulate matter on lichen transplant thalli (Hypogymnia physodes) was assessed as a complementary technique to wet chemical analysis for source apportionment of airborne contaminants. Transplants (2 month exposure) stationed in the Cu smelter and former mining town of Karabash were compared with those from a control site 30 km south. Particulate matter in Karabash samples (715 analyses) showed higher levels of S, Pb, Cu, Sn and Zn compared with the control (598 analyses). Complex element associations among the particles confounded detailed mineralogical identifications, and therefore a simplified particle classification scheme was devised for source apportionment. Karabash samples contained high levels of particles classified as mining-related (MRP), and these were also identified in control samples, indicating wide spatial dispersion from the smelter and highlighting the sensitivity of the method. It was noted that MRP <2.5-microm diameter were poorly represented on lichen surfaces suggesting this may limit the usefulness of Hypogymnia transplants as proxies when assessing human health impacts from airborne particulates. Analyses of the lichen thallus surface (away from surface particulates) revealed high levels of Cu, Zn, Fe and Pb associated with organics in the Karabash samples compared with the control, with a proportionate loss of K, interpreted as being due to a stress-related increase in cell membrane permeability. This type of analysis may provide a novel SEM-EDX-based method for assessing lichen vitality. The techniques developed are presented and further implications of the study are discussed.     

Dissolution of copper, tin, and iron from sintered tungsten-bronze spheres in a simulated avian gizzard, and an assessment of their potential toxicity to birds

The rates of dissolution of copper, tin, and iron from sintered tungsten-bronze spheres (51.1%W, 44.4%Cu, 3.9%Sn, 0.6%Fe, by mass) were measured in an in vitro simulated avian gizzard at pH 2.0, and 42C. Most of the spheres had disintegrated completely to a fine powder by day 14. Dissolution of copper, tin, and iron from the spheres was linear over time; all r>0.974; all P<0.001. The mean rate of release of copper, tin, and iron was 30.4 mg, 2.74 mg, and 0.38 mg per g tungsten-bronze per day, respectively. These rates of metal release were compared to those in published studies to determine whether the simultaneous ingestion of eight spheres of 3.48 mm diameter would pose a toxic risk to birds. The potential absorption rates of iron and tin (0.54 mg Fe/day, and 3.89 mg Sn/day) from eight tungsten-bronze spheres of total mass 1.42 g would not prove toxic, based on empirical studies of tin and iron ingestion in waterfowl. The release of 43.17 mg copper/day from eight tungsten-bronze spheres, while exceeding the daily copper requirements of domesticated birds, is far below the levels of copper known to cause copper toxicosis in birds. We conclude that sintered tungsten-bronze material made into gunshot, fishing weights, or wheel balance weights, would not pose a toxic risk to wild birds when ingested.     

The characterisation of friction stir welding process effects on stiffened panel buckling performance

The introduction of advanced welding methods as an alternative joining process to riveting in the manufacture of primary aircraft structure has the potential to realise reductions in both manufacturing costs and structural weight. However, welding processes can introduce undesirable residual stresses and distortions in the final fabricated components, as well as localised loss of mechanical properties at the weld joints. The aim of this research is to determine and characterise the key process effects of friction stir welding assembly methods on stiffened panel static strength performance. Utilising experimentally validated finite element modelling methods, it is demonstrated that welding induced residual stresses have a significant influence, and that collapse behaviour is less sensitive to advanced process effects and process effect magnitudes than panel initial buckling behaviour.     

The acute effect of bunker C oil and an oil dispersant on: 1 Serum glucose, serum sodium and gill morphology in both freshwater and seawater acclimated rainbow trout (Salmo gairdneri)

Bunker C oil and an oil dispersant were tested for physiological stress on both freshwater and saltwater acclimated rainbow trout. Both compounds tended to reduce serum glucose levels with Bunker C causing the more significant decrease (P < 0.08), indicating a possible dysfunction of the kidney. The freshwater treatment group showed a significant decrease in sodium levels (P < 0.01) when treated with a dispersant, while under similar conditions, saltwater acclimated fish show a very marked increase in serum sodium concentrations (P < 0.025). Those fluctuations in sodium levels are resultant from direct interference with the energy activated sodium transport systems of the gills. Microphotographs of gill filaments and lamellae show severe damage caused by the dispersant and dispersant/oil mixture with less impairment resultant from Bunker C exposure.     

Biodegradation of urea in river waters under controlled laboratory conditions

The biodegradation of urea in river waters has been evaluated under laboratory conditions. Urea will degrade to ammonia at a rate depending on the bacterial state of the river water and on the water temperature. Under normal conditions no breakdown may be expected to occur at temperatures below 8°C for 14 days contact. In river waters with a high suspended solids content, simulating extreme winter river conditions, a maximum breakdown of 3–6 per cent daily of the original urea levels was found for temperatures not exceeding 8°C during the first 7 days contact.