Inclined hot-wire response equations for a flow field having a dominant tangential velocity component

Modified sets of response equations have been derived for a single inclined hot-wire probe introduced in various orientations in a flow field having a dominant tangential velocity component. By means of these equations, the components of the three dimensional mean velocity vectors, the turbulence intensity and the Reynolds stresses can be easily determined at any location in a swirling flow which is stationary with time. This method is particularly applicable to the characterization of the flow field in chemical processing equipment where this type of swirling flow is increasingly being used. It has been successfully applied to a study of the flow field in a spray-drying chamber, in the course of which good reproducibility and consistency of results were obtained.     

Behavioral and physiological responses of cabbage looper,Trichoplusia ni (Hübner), to steam distillates from resistant versus susceptible soybean plants

Soybean plant volatiles, extracted as steam distillates, significantly affected the behavior and biology of the cabbage looper,Trichoplusia ni (Hübner) (Lepidoptera: Noctuidae). Distillates from the susceptible Davis variety attractedT. ni larvae and female adults, whereas those from resistant PI 227687 plants repelled them. When mixed in an artificial diet, steam distillates from PI 227687 plants caused mortality of first-instar larvae. Adults emerging from pupae topically treated with 5 g of such PI 227687 extractable showed developmental abnormalities. Larval feeding was significantly less on Davis leaves treated with PI 227687 volatiles as compared to solvent (acetone) or such Davis extractables. However, Davis volatiles on PI 227687 leaves did not increase larval feeding. HPLC analyses of steam distillates from susceptible Davis versus resistant PI 227687 indicated differences.     

Predicting N mineralized in a Georgia Coastal Plain field

The N mineralized from soil organic matter provides an important portion of N available for crop production. The objective of this study was to determine the amount of spatial variability in N mineralization potential in a field and to evaluate three different methods that might be used to estimate this variability. The three methods tested included predicting the N mineralized from surface soil properties as well as from a biological and a chemical procedure. Three soils varying in N mineralization potential were selected for the study from a field in the Georgia Coastal Plain. The N mineralized from these soils was determined by an N balance of unfertilized and cropped plots. The amount of N mineralized could not be reliably predicted from surface soil organic C, although surface soil clay concentration was positively correlated with the N mineralized. The N mineralized that was predicted using mineralization parameters determined by aerobic incubation, adjusted daily for soil water content and temperature, was approximately 50% of the field measurements of N mineralized. The values of NH₄-N extracted with hot 2 M KCl were related significantly to N mineralized in the field (r²= 0.60) and also to the zero order rate constant of mineralization, k₀ (r²= 0.77), determined from the N mineralized in the aerobic laboratory incubation.     

Effect of test frequency and water content on localized crack-tip heating in nylon-6,6

Fatigue crack propagation (FCP) tests were conducted at various frequencies on nylon-6,6 specimens equilibrated over a range of moisture levels to determine the crack growth rates and the crack-tip temperatures as a function of water content. Frequency-sensitivity was correlated with the amount of crack-tip heating taking place, with crack-tip temperature being found to depend strongly on the estimated loss compliance, D″, of the material. The frequency-sensitivity of FCP in nylon was seen also to be affected by mean stress, suggesting that creep processes are often significant in FCP of nylon.     

Determination of the elastic component for polymeric melt under steady shear flow

Steady state shear flow in rectilinear coordinates can be generated by a direct shear rheometer. The rheological behavior of polymeric melts under shear flow can be characterized by the inception of steady shear flow and stress relaxation after cessation of steady shear flow. Experiments were performed for bisphenol A polycarbonate with various mol wts. The elastic components, such as the primary normal stress differences and the elastic recoverable shear strain of the polymeric melts, can be determined from the shear moduli. © 1993 John Wiley & Sons, Inc.     

Sex-specific activity of (R)-(−)- and (S)- (+)-1,7-dioxaspiro[5.5]undecane,the major pheromone ofDacus oleae

1,7-Dioxaspiro[5.5]undecane (olean), the major component of the female sex attractant pheromone blend of the olive fruit flyDacus oleae (Gmelin) was shown to be released as a racemate. The response of males and females to pure (R)-(–) and (S)-(+)-enantiomers was tested under laboratory and field conditions. Males in laboratory and field tests responded only to (R)-(–)-olean, which functions as a sex attractant. Females responded only to (S)-(+)-olean in laboratory tests but not in the field. There are indications that the latter enantiomer fuctions as a short-range arrestant throughout the day and as an aphrodisiac in the process of mating.Diptera: Tephritidae.     

The separation of solid fatty acids from liquid fatty acids by the formation of acid soaps. I. Tallow soaps

The formation of acid soaps has been used successfully for the separation of a mixture of fatty acids into high and low iodine value fractions. The acid soaps of saturated acid can be made to crystallize from water leaving their unsaturated counter parts in solution. Acid soaps of saturated fatty acids are well characterized compounds with the formula R-COOM.R-COOH, where R is a straight alkyl chain, and M is sodium, potassium or ammonium. Optimum crystallization conditions involve a soap concentration of 2–5%, pH adjustment to between 7.0 and 8.0, an initial crystallization temperature not below 25C, and a crystallization period of at least 4 hr during which time cooling to a final temperature of 5–10C must be gradual, and agitation gentle.     

Pressure reaction of maleic esters with vegetable oils

The reaction of dimethyl maleate and some related dienophiles with vegetable oils under pressure has been studied successfully. When safflower oil reacts with 100% excess maleate, sulfur dioxide catalyst, and hydroquinone inhibitor at 290° for 1hr., 80 to 90% yields of adduct fraction, based on linoleate, are obtained. Under the same conditions almost equally good yields result with either linseed or soybean oils. With safflower oil, dimethyl fumarate gave slightly lower yields. Di-n-butyl maleate gave even poorer yields, and much residue was formed. Paper II in a series entitled, “Reactions of Dienophiles with Vegetable Oils”. Presented at annual meeting, American Oil Chemists' Society, St. Louis, Mo., May 1–3, 1961. This is a laboratory of the Northern Utilization Research and Development Division, Agricultural Research Service, U.S. Department of Agriculture.