二氧化硅包覆CsPbI3纳米晶薄膜的制备

卤化钙钛矿型(ABX3)纳米材料是近几年兴起的光电新材料,由于全无机钙钛矿CsPbX3(X=Cl,Br,I)纳米晶体的稳定性差,严重阻碍了实际应用,但因其具有窄带隙,在太阳能电池领域有着重要的应用前景.本研究在CsPbI3纳米晶周围使硅酸四甲酯(TMOS)发生水解反应,形成CsPbI3@SiO2纳米晶体复合材料,促使甲苯悬浮液的稳定性显著提高,发光稳定性可增加到29 d.通过进一步以聚(苯乙烯-乙烯-丁二烯-苯乙烯)三嵌共聚物(SEBS)对复合材料进行包裹,得到具有良好透明性和可拉伸性的SEBS/CsPbI3@SiO2薄膜,在水中有保持24 h稳定荧光现象,在水中12 h能保持原有发光强度的53％,而未经二氧化硅包裹的SEBS/CsPbI3纳米晶薄膜在水中仅8 h就失去荧光.本研究不仅为CsPbX3的表面改性提供了一种新方法,有助于解决稳定性问题,而且以聚合物复合的薄膜具有可拉伸性,也可应用在柔性器件中,具有重要的应用价值.     

钨酸镁催化超声降解金橙Ⅱ研究

采用水热法合成了钨酸镁(MgWO4)半导体催化剂,并使用金橙II为有机污染物模型研究了其声催化降解性能.结果表明:MgWO4具有良好的声催化活性,可显著提升超声对有机污染物的降解效果,而且MgWO4具有优秀的可重复利用性能.同时,MgWO4催化超声降解金橙Ⅱ的机理研究表明,产生的活性物质如羟自由基(·OH)、超氧阴离子自由基(·O2-)和空穴(h+)是声催化降解金橙II的主要原因.以上研究结果表明MgWO4作为声催化剂用于处理有机染料废水具有良好的应用前景.     

非线性滤波在射线图像降噪增强中的应用

射线数字成像是当前射线检测与诊断技术发展的方向，图像降噪增强是提高射线成像检测灵敏度和分辨力的关键。重点探讨以排序滤波为代表的非线性滤波图像降噪增强方法，对射线图像的处理表明，线性滤波在降噪的同时会引起较大的边级模糊，而排序滤波不仅降低噪声且能保持图像细节，提高图像质量效果明显。     

热压变形对灰口铸铁石墨形态的影响

研究了灰口铸铁(HTl50)在900℃大压下量塑性变形后石墨的分布形态，结果表明：随着压下量的增加，石墨片逐渐趋于平行分布；变形过程中发生了碳的回溶，同时伴随着石墨片的断裂；石墨片体积分数及片间距随压下量的增加而逐渐减少。     

碳纳米管及稀土元素钇(Y)对高Ni含量Ti(C,N)基金属陶瓷组织与性能的影响

研究了不同含量的碳纳米管及0.8%稀土Y对高Ni含量Ti(C,N)基金属陶瓷组织性能的影响.将不同成分的试样分别于1400℃、1410 ℃、1420℃真空烧结,测试抗弯强度、洛氏硬度,观察背散射电子形貌、断口形貌并做能谱分析.结果表明,加入质量分数(下同)为0.8%Y及0.3%～1.0%的碳纳米管时,碳纳米管含量为0.5%的组织较均匀,芯壳结构明显,抗弯强度及硬度均较高.     

多关节机器人通用体系结构的研究

结合一个五自由度教学工业两用型机器人应用实例，构造出多关节机器人通用体系结构，包括总体原型、机械结构、关节传动链、伺服驱动元件、电气控制系统、关节坐标系及其运动学方程、通信协议和软件设计思路等。通过实际使用表明，本文提出的通用体系结构是实用的、合理的。     

Preparation and properties of nanosize MnZn ferrite from δ-FeOOH

Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.     

Analysis of Intermetallic Phases Formed on Surface Vapor Oxidized H13 Hot Work Steels in Molten Aluminum

In this paper, the author dipped surface vapor oxidized H13 steel specimens into 700℃ molten aluminum liquid for a certain period of time. Analyze the intermetallic phases formed on the H13 samples surface with optical microscope and X-ray diffraction method. The observation of immersion test sample's cross-section shows that Fe3O4 film will protect die substrate from molten aluminum erosion. The identification of the intermetallic phases reveals that they consist of 2parts, which is named as the composite layer and the compact layer. Further investigations are made in order to know the phase constituents of the 2 layers, they are Al8Fe2Si (outer composite layer), (AlCuMg) and Al5Fe2 (compact layer),respectively. The experimental results show that on the same specimen, a convex surface with bigger radius of curvature is more likely to be molten and the melting loss speed is also faster than a flat and smooth surface. The thickness of compact layer on a smooth surface is much bigger than that of the convex surface. Therefore, the author supposes the compact layer is favorable in stabilizing the die surface material from further melting loss, as their formation on the die surface, the melting loss speed will decrease.