An important factor affecting synergism on coprocessing of Taiheiyo coal with Athabasca oil sand bitumen

A series of mixtures of Japanese subbituminous Taiheiyo coal and Athabasca oil sand bitumen (AOB) with various coal concentrations (0–100 wt%) was coprocessed in a 70 ml autoclave at 420°C for 1 h in the presence of H₂ (50 kg/cm² at room temperature) and sulfided Ni---Mo/Al₂O₂ catalyst. The mixture containing 2 wt% coal produced the largest amount of hexane soluble fraction (HS) and the smallest amount of benzene insoluble fraction (BI). Thus, a synergistic liquid production occurred for this mixture with 2 wt% coal by suppressing the retrogressive reactions which proceeded for pure AOB. The HS obtained from mixtures with 2–30 wt% showed higher H/C ratios and lower heteroatom contents than those obtained from pure AOB and the mixtures with more than 30 wt% coal. The amounts of transferable hydrogen contained in the mixtures were estimated using anthracene as a hydrogen acceptor. The mixtures with 2–10 wt% coal contained higher amounts of donor hydrogen than pure AOB. The HS yield from the various mixtures was correlated with the amount of donor hydrogens contained in the mixtures, except for the mixture with 10 wt% coal. Thus, the important factor which results in synergism is suggested to be the amount of donor hydrogens contained in the feed mixtures.     

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO2 for no reduction by NH3

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO₂ for NO reduction by NH₃ was examined in a fixed-bed flow reactor. The deactivation of the catalyst was strongly dependent on reaction temperature. At high reaction temperatures over 300°C, the catalyst did not lose its initial activity up to 50 h of operation, regardless of SO₂ feed concentration from 500 to 20,000 ppm. However, at low reaction temperatures near 250°C, apparent deactivation did occur. Changes in the physicochemical properties such as surface area and sulfur content of deactivated catalyst well correlated with catalyst activity, depending upon reaction temperatures. The deactivation was due to pore blocking and/or filling by deactivating agents, which plugged and/or filled the pores of catalyst. The deactivating agents deposited on the catalyst surface were presumed to be (NH₄)₂SO₄ and/or (NH₄)HSO₄ from the results of TGA and ion-chromatography measurement.     

Interfacial chemistry and adhesive durability

The improved understanding of adsorption chemistry which has arisen from the development of new surface analytical techniques during the last twenty years has had a major effect on the understanding of catalytic reaction mechanisms. However, there are many other areas of technology where Interfacial chemistry has a determining role but where the understanding is much less developed. In this paper examples are presented of the role of interfacial chemistry in adhesion. In particular, It Is shown that modification of a surface to the extent of just a few atomic layers in depth can have dramatic effects on the performance of adhesive bonds, particularly when exposed to hostile environmental conditions. These examples will be used to highlight a need for greater fundamental understanding of the interfacial chemistry of adhesion and also other technologies where interface effects are dominant.     

New generation superabrasive tool with monolayer configuration

In recent years, chemically bonded single-layer diamond abrasive tools are getting preference over their galvanically bonded counterparts for many applications because of their outstanding performance. The chemical bonding is achieved by direct brazing of the diamond grit to a steel substrate with an active braze alloy. The present study has shown that the principle of chemical bonding can be extended to fabricate monolayer CBN-coated tools. It is further indicated that understanding of the influence of various construction parameters on the formation of the topography of the tool is required to prepare a good brazed tool. Various case studies are presented to show the influence of the topography of the working surface of such a tool, work material characteristics and grinding parameters on the behaviour of the tool in terms of cutting capability, force and power requirement, loading, grit wear and grit pull out.     

The effect of pack-aluminisation on the microstructure of MCrAlY and the performance of thermal barrier coatings

Plasma spraying and pack-aluminising processes were combined and applied to the nickel-base superalloy Mar-M247 to improve its cyclic oxidation resistance. The performance tests of duplex ZrO₂-8 wt.%Y₂O₃/MCrAlY thermal barrier coatings (TBCs) were conducted at 1050 °C, 1075 °C, 1100 °C, 1150 °C and 1200 °C. The results of the experiments in this study showed that TBC specimens with the aluminised MCrAlY bond coat exhibited higher cyclic lives (except for the Ni-22Cr-10Al-1Y bond coat), at all the temperatures tested, than specimens on which the bond coat was not aluminised. The microstructures of the Co-29Cr-6Al-1Y, Co-32Ni-21Cr-8Al-0.5Y and Ni-22Cr-10Al-1Y bond coats with or without aluminising treatment were examined in detail using a scanning electron microscope equipped with an electron probe microanalyzer.     

Energy dissipation via radiative recombination and vibronic relaxation in σ-delocalized silicon backbone network polymers

The nature of ultrafast energy dissipation in poly(n-hexylsilyne), a prototypical σ-delocalized alkysilicon network polymer, is explored. This disordered silicon backbone material exhibits strong near-UV to visible band-edge absorption and a high quantum yield of visible emission. The time evolution of the emission band is studied over four decades of time using time-resolved luminescence as a probe. The data indicate that while there is an ‘intrinsic’ Stokes shift after photoexcitation due to kinetic energy relaxation (<10ps), thermalization within a dense band of vibronic states via intramolecular phonon-assisted hopping on a nanosecond timescale is the dominant mechanism for excited-state decay. The data can be understood in terms of theoretical predictions for energy relaxation in disordered materials.     

Gel chromism and anomalous luminescence in poly(3-alkylthiophene)

The absorption spectrum of poly(3-alkylthiophene) gel changes drastically in association with a volume instability upon changing the solvent composition and also the temperature. In the expanded state in chloroform and at high temperature, the photoluminescence is much enhanced compared with the shrunken state in ethanol and at low temperature. This gel chromism and anomalous luminescence are discussed in terms of the change of effective conjugation length induced by the steric hindrance and the dynamics of the photoexcited species.     

Photoinduced bidirectional phase transitions in single crystals of polydiacetylenes

Photoinduced phase transitions have been observed between the two phases in single crystals of polydiacetylenes with side-groups of alkylurethanes. The threshold of the excitation intensity for the photochromism is extremely low, one absorbed photon per 140 repeated backbone units, indicating a collective nature of the photoconversion. The excitation spectra for the converted fraction clearly show that the photoinduced phase transition is mediated by photogeneration of polaronic species and not of singlet excitons.     

Nitrogen plasma source ion implantation of AISI S1 tool steel

Significant economic savings can be achieved by improving the wear lifetime of precision manufacturing tools through nitrogen-ion implantation. This near-ambient temperature, surface modification process preserves dimensional integrity and surface finish while eliminating delamination problems that are often associated with overlay coatings. Conventional ion implantation is a line-of-sight process which requires elaborate manipulation and masking to uniformly implant components of complex shapes. A recently developed process, plasma source ion implantation (PSII), circumvents this line-of-sight restriction and makes ion implantation more attractive economically. In this article, the effects of PSII of nitrogen at a target bias of 50 kV, to a dose of 0.3 × 10¹⁸ atoms/cm² on the surface microstructure and mechanicalproperties of AISI S1 tool steel are presented.