Hydrogen bonding,miscibility, crystallization,and thermal stability in blends of biodegradable polyhydroxyalkanoates and polar small molecules of 4‐tert‐butylphenol

The hydrogen bonding, miscibility, crystallization, and thermal stability of poly(3‐hydroxybutyrate) (PHB)/4‐tert‐butylphenol (BOH) blends and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(3HB‐3HHx)]/BOH blends were investigated by Fourier transform infrared (FTIR) spectroscopy, solid‐state¹³C‐NMR, differential scanning calorimetry, wide‐angle X‐ray diffraction (WAXD), and thermogravimetric analysis. The results of FTIR spectroscopy and solid‐state¹³C‐NMR show that intermolecular hydrogen bonds existed between the two components in the blends and that the interaction was caused by the carbonyl groups in the amorphous phase of both polyesters and the hydroxyl groups of BOH. With increasing BOH content, the chain mobility of both the PHB and P(3HB‐3HHx) components was improved. After the samples were quenched, the detected single glass‐transition temperatures decreased with composition, indicating that both PHB/BOH and P(3HB‐3HHx)/BOH were miscible blends in the melt. Moreover, as BOH content increased, the melting temperatures of PHB and P(3HB‐3HHx) clearly decreased, which implied that their crystallization was suppressed by the addition of BOH. Although the crystallinity of PHB and P(3HB‐3HHx) components decreased with increasing BOH content in the blends, their crystal structures were hardly affected after they were blended with BOH, which was further proven by WAXD results. In addition, the thermal stability of PHB was improved by a smaller amount of BOH.     

金属铝诱导法低温制备多晶硅薄膜

以氢气稀释的硅烷（SiH4）和硼烷（B2H6）为气源,利用等离子体增强化学气相沉积法（PECVD）制备出p型a-Si薄膜.采用铝诱导晶化技术对不同厚度的铝膜对a-Si薄膜晶化的影响进行了研究.实验中发现,铝膜溅射为10 s的非晶硅薄膜样品在450℃下退火10 min后,p型a-Si结构仍为非晶态,铝膜溅射为20 s的非晶硅薄膜在450℃下退火20 min后,p型a-Si薄膜开始晶化为polySi薄膜,并且铝膜厚度越厚,则a-Si薄膜晶化程度越强.     

Viscoelastic Behavior, Thermodynamic Compatibility, and Phase Equilibria in Block Copolymer-Based Pressure-Sensitive Adhesives

The viscoelastic behavior, thermodynamic compatibility, and phase equilibria in block copolymer-based pressure-sensitive adhesives were investigated. The block copolymers investigated were: (1) polystyrene-block-polybutadiene-block-polystyrene (SBS) copolymer (KRATON® D-1102, Shell Development Company) and (2) polystyrene-block-polyisoprene-block-polystyrene (SIS) copolymer (KRATON® D-1107, Shell Development Company). The tackifying resins investigated were: (1) WINGTACK® 86 (Goodyear Tire & Rubber Company) and (2) PICCOTAC® 95BHT (Hercules Inc.). Samples of various compositions were prepared by a solution-casting method with toluene as solvent. Measurements of dynamic storage modulus (G'), dynamic loss modulus (G'), and loss tangent (tan δ) were taken, using a Rheometrics Mechanical Spectrometer. It was found that: (1) both WINGTACK 86 and PICCOTAC 95BHT were equally effective in decreasing the plateau modulus (G^O_N), and increasing the glass transition temperature (T_g) of the polyisoprene midblock of KRATON 1107; and (2) WINGTACK 86 was very effective in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102, whereas PICCOTAC 95BHT was not. The observed difference between WINGTACK 86 and PICCOTAC 95BHT in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102, whereas PICCOTAC 95BHT was not. The observed difference between WINGTACK 86 and PICCOTAC 95BHT in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102 (perhaps to SBS block copolymers in general) is explained by the values of the interaction parameter for WINGTACK 86 and KRATON 1102, and for PICCOTAC 95BHT and KRATON 1102. The interaction parameter was determined, using the piezoelectric quartz sorption method. Phase diagrams were constructed for the four block copolymer/tackifying resin systems investigated, using information obtained from both dynamic viscoelastic measurements and optical microscopy. It was found that when mixed with KRATON 1102, PICCOTAC 95BHT formed separate domains whereas WINGTACK 86 did not over the range of concentrations and temperatures investigated. This confirms the evidence obtained from two other independent experimental techniques, namely, dynamic viscoelastic measurements and the piezo-electric sorption method. We have concluded from the present study that PICCOTAC 95BHT is not as an effective tackifying resin as WINGTACK 86, when each is mixed with KRATON 1102. It is pointed out further that information on the order-disorder transition temperature T_r, which was determined from a rheological technique proposed by us, is valuable in determining optimal processing conditions for block copolymer-based pressure-sensitive adhesives.     

Effects of soaking soybeans in dilute acids on biologically active components

Soaking soybeans in dilute acids affected activities of lipoxygenase, trypsin inhibitor and urease. Effects of soaking time, acid concentration and soaking temperature were investigated. Lipoxygenase activity was completely eliminated by soaking in 0.3 M HC1 at either 23°C or 40°C for 8 hr. Less than 50% trypsin inhibitor remained and urease was inactivated to an acceptable level (0.04 ΔpH).     

Silane functionalization of perfluoroether oligomers for reaction management and morphology control of two‐phase epoxy networks

Mixtures of an epoxy resin, hardener, and acid functionalized perfluoroether oligomers will readily undergo phase separation during curing. However, the conditions to bring about the growth of nuclei into microscopic particles have hitherto been found only for systems cured with anhydrides. In the present study perfluoroether oligomers were functionalized by established procedures to introduce both carboxylic acid groups and alkoxysilane groups in sites within the chain extended segments. The presence of alkoxysilane groups together with the prereaction step with an excess epoxy resin, prior to the addition of the aromatic amine hardener, induced phase separation by a nucleation‐and‐growth mechanism. The dual functionality in the perfluoroether oligomer was even more beneficial when the alkoxysilane groups were hydrolyzed prior to the addition of the amine hardener. Under such circumstances the precipitation of the perfluoroether oligomer occurred quantitatively, as indicated by the complete absence of any plasticization effects in the epoxy matrix. From electron microscopy examinations, thermal analysis, and measurements of mechanical properties it was possible to deduce a plausible mechanism for the formation of the typical core‐shell aggregates within the precipitated particles for these systems, which could also be applied to other systems, such as those using carboxylic‐acid‐terminated butadiene acrylonitrile oligomers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1036–1049, 2005     

A resilience optimization approach for workforce-inventory control dynamics under uncertainty

The presence of uncertainties in manufacturing systems and supply chains can cause undesirable behavior. Failure to account for these in the design phase can further impair the capability of systems to respond to changes effectively. In this work, we consider a dynamic workforce-inventory control problem wherein inventory planning, production releases, and workforce hiring decisions need to be made. The objective is to develop planning rules to achieve important requirements related to dynamic transient behavior when system parameters are imprecisely known. To this end, we propose a resilience optimization model for the problem and develop a novel local search procedure that combines the strengths of recent developments in robust optimization technology and small signal stability analysis of dynamic systems. A numerical case study of the problem demonstrates significant improvements of the proposed solution in controlling fluctuations and high variability found in the system’s inventory, work-in-process, and workforce levels. Overall, the proposed model is shown to be computationally efficient and effective in hedging against model uncertainties.     

Conceptual and basic designs of the Mobile Harbor crane based on topology and shape optimization

The Mobile Harbor (MH) has been recently proposed as a novel maritime cargo transfer system that can move to a container ship anchored in the deep sea and handle containers directly at sea with the aid of a stabilized MH crane. Because this system operates under at-sea conditions, the MH crane must be designed to support an inertia load and wind force, as well as its self-weight. The wave-induced motions of the MH, e.g. rolling, pitching, and heaving, generate a significant amount of inertia load, which has not been considered in the design of conventional quayside cranes installed on stable ground. Wind force is also a critical design factor due to the higher wind velocity in the open sea. In addition to the aforementioned structural rigidity, mass minimization is also important in the structural design of MH cranes because it reduces the overturning moment and therefore enhances ship stability. In this paper, the sensitivities of the design-dependent loads (i.e. self-weight, inertia load, and wind force) are derived with respect to the design variables, and then a topology optimization is conducted with the derived sensitivities in order to obtain a conceptual design. Then, the conceptual design is elaborated into a three-dimensional basic design through shape optimization with design regulations for offshore cranes. Through the integrated design process with the topology and shape optimizations, a conceptual and basic design is successfully obtained for the MH crane.     

Partition coefficient of diglycerides in crystallization of palm oil

Crystallization of palm oil with and without solvent was carried out over a temperature range of 10–25°C. The yields of olein, the diglyceride contents, and compositions of the stearin and olein phases were determined by thin-layer and gas-liquid chromatography. The three major diglycerides, analyzed as C₃₂, C₃₄, and C₃₆, are mainly dipalmitoyl glycerol, palmitoyloleoyl glycerol, and dioleoyl glycerol. In crystallization without solvent, C₃₂ (PP) had a strong affinity for the stearin fraction and C₃₆ diglycerides concentrated in the olein phase. The partition coefficient of diglycerides between the olein and stearin phases was temperature-dependent and was influenced by the type of solvent used. Although solvent enhances the diglyceride partition into the olein phase, partitioning is more effective at low temperatures and with acetone as the solvent for fractionation.     

模型驱动的装备保障优化决策支持系统

以数据、模型、用户界面等要素为基础,提出了以优化模型为驱动的装备保障优化决策支持系统设计思路,拓展设计了系统总体功能结构.构建了包含算法库、模型库和应用库的模型库,引入了脚本模型,以顺序、选择或循环结构程序组合优化模型,实现复杂装备保障决策问题的求解和决策.实例应用表明系统极大地提高了部队装备精确保障能力.     

无线环境下基于多流优先级的并行多路传输

在无线异构网络环境下提出一种基于多流优先级的并行多路传输方案。该方案基于并行多路传输协议CMT-SCTP,并利用了SCTP的多流特性和部分可靠特性。针对数据的重要性和时间敏感度,设计优先级数据调度算法;同时提出基于路径质量的数据分发机制,进一步保证数据的有效传输。在NS-2中的仿真结果表明,该方案能够有效提高数据传输的吞吐量,减少时延,保证较好的数据传输性能。