Bimetallic Au–Cu, Ag–Cu/CrAl3O6 Catalysts for Methanol Synthesis

The influence of silver and gold addition on the activity and physicochemical properties of supported Cu/CrAl₃O₆ catalysts was the aim of this work. The reduction of CrAl₃O₆ support shows only one reduction stage attributed to Cr (VI) species reduction originating from previously oxidized binary oxide. Supported copper catalysts reduce in one or two stages depending on copper concentration representing the reduction of copper oxide—CuO, copper oxide chemically combined with Cr(III) oxide as copper chromite—CuCr₂O₄ and Cr(VI) species originating from surface chromate ions CrO₄ ^2?. Additionally, the introduction of silver into supported copper catalysts Cu/CrAl₃O₆ can led to the appearance of silver chromate phase. XRD investigations of support CrAl₃O₆ alone, supported copper and gold and silver promoted copper supported catalysts calcined at 400, 700 and 900 °C indicated the presence of highly amorphous alumina γ-Al₂O₃ like structure network in which some of cationic locations of aluminum were occupied by chromium atoms and small quantities of α-Cr₂O₃ phase. Additionally, for copper, silver–copper, and gold–copper supported catalysts the following oxide phases were distinguished: monometallic oxides CuO, Ag₂O, binary oxides CuAl₂O₄, Ag₂CrO₄, CuCr₂O₄ and even ternary oxide CuAlCrO₄. In the case of gold promoted copper supported catalysts metallic gold phase was detected. Activity tests carried out for these catalysts show that the most active was 20 wt.% Cu/CrAl₃O₆ catalyst. Promotion of copper catalysts by silver improves the activity in methanol synthesis, what can be assigned to silver chromate formation. The analogical gold chromate like formation was not confirmed.     

Thermal stability of expanded perlite modified by mullite

Results of the thermal stability of expanded perlite modified by mullite are presented. Mullite was formed from alumino-silicate gel by sol–gel method. This method allowed us to obtain very homogenous and reactive gel and phase formation of mullite took place at relatively low temperatures. Expanded perlite modified with alumino-silicate gel after firing above the temperature of mullite formation had better thermal stability and durability during heating. The thermal stability of this material was examined up to 1400 °C.     

Fatigue strength of welded joints in austenitic Cr-Ni steels

Abstract

High quality corrosion resistant Cr-Ni steels are used in many branches of industry. Constructors are faced with the problem of correctly dimensioning statically and dynamically loaded parts, but have little data available for dynamically loaded welded constructions of high alloy austenitic steels. To close this gap fatigue strength tests were carried out on three different steels and five different welded joints.     

Aromatic Bis[aminomethylidenebis(phosphonic)] Acids Prevent Ovariectomy-Induced Bone Loss and Suppress Osteoclastogenesis in Mice

Osteoporosis is a skeletal disease associated with excessive bone turnover. Among the compounds with antiresorptive activity, nitrogen-containing bisphosphonates play the most important role in antiosteoporotic treatment. In previous studies, we obtained two aminomethylidenebisphosphonates—benzene-1,4-bis[aminomethylidene(bisphosphonic)] (WG12399C) acid and naphthalene-1,5-bis[aminomethylidene(bisphosphonic)] (WG12592A) acid—which showed a significant antiproliferative activity toward J774E macrophages, a model of osteoclast precursors. The aim of these studies was to evaluate the antiresorptive activity of these aminobisphosphonates in ovariectomized (OVX) Balb/c mice. The influence of WG12399C and WG12592A administration on bone microstructure and bone strength was studied. Intravenous injections of WG12399C and WG12592A bisphosphonates remarkably prevented OVX-induced bone loss; for example, they sustained bone mineral density at control levels and restored other bone parameters such as trabecular separation. This was accompanied by a remarkable reduction in the number of TRAP-positive cells in bone tissue. However, a significant improvement in the quality of bone structure did not correlate with a parallel increase in bone strength. In ex vivo studies, WG12399C and WG12592A remarkably bisphosphonates reduced osteoclastogenesis and partially inhibited the resorptive activity of mature osteoclasts. Our results show interesting biological activity of two aminobisphosphonates, which may be of interest in the context of antiresorptive therapy.     

Thermodynamic analysis of afterburning of detonation products in confined explosions

Abstract

In the paper, an attempt is undertaken to apply the thermodynamic theory of closed combustion, proposed by A. K. Oppenheim and co-workers, to analyse the process of afterburning of the detonation products of condensed explosives in a chamber filled with air. The principal assumptions of the theory are presented and the problem of combustion of fuel in a closed volume is formulated. The relations between thermodynamic parameters and fuel consumption are determined from the laws of conservation of volume, mass and energy. These relations are used to estimate the rate and heat effect of afterburning of the detonation products of some explosives in a steel chamber of 150 dm³ volume. The influence of assumed degree of mixing of the combustion products and air on the mean pressure in the chamber is discussed.     

Sensitivity and performance properties of tex explosives

Abstract

Some sensitivity and performance properties of TEX were studied experimentally and theoretically. The TEX sensitivity to electrostatic spark was determined and tests for transportation were performed. The detonation properties, like the critical diameter, detonation pressure and Gurney energy were determined. Moreover, the detonation velocities of TEX-based cast explosives were compared with those of similar NTO-based ones.     

Changes in chemical composition during development of grass pea (Lathyrus sativus L.) seeds

The level of chemical components was determined in seeds of grass pea (Lathyrus sativus L.), cv. Krab, harvested at a dry matter content between 25.9 and 49.6 g/100 g of the raw material, and divided into five degrees of maturity. The results presented suggest that, in general, with an increasing maturity of seeds, the level of the following components increased if related to fresh matter: starch, dietary fibre, acids, total and protein nitrogen, total amino acids and sulphur amino acids, ash and its alkalinity, magnesium, calcium, total phosphorus and phytic phosphorus, and thiamine. The following components were reduced: vitamin C, riboflavin, carotenoids, beta-carotene, and chlorophylls. No such regularity could be found with respect to the accumulation of sugars, essential amino acids, and iron. By expressing the results in dry matter, increases were noted in starch, protein nitrogen, and thiamine. The content of sugars, total nitrogen, total amino acids, essential and sulphur amino acids, ash and its alkalinity, magnesium, phosphorus, vitamin C, riboflavin, carotenoids, beta-carotene, and chlorophylls were reduced while that of dietary fibre, iron, calcium, and phytic phosphorus varied.     

Determination ofp-cymene-2,3-diol, thymol, and carvacrol in different foodstuffs

p-Cymene-2,3-diol, carvacrol and thymol are components of thyme that exhibit antioxidant activities. The concentration of each substance was determined in different foodstuffs containing thyme extract. The stabilities ofp-cymene-2,3-diol, carvacrol and thymol were examined by heating lard containing thyme extract at temperatures from 80 °C to 160 °C.     

Tribochemical Conversions of Zinc Dialkyldithiophosphate (ZDDP) Under Extremely Different Pressure Conditions

The authors performed ball-on-disk and four-ball tests. The former gave much less severe conditions than the latter. A ZDDP-containing package, blended with a mineral base oil, was tested. Completely different mechanisms of ZDDP conversions were observed. During ball-on-disk tests, ZDDP undergoes partial tribochemical decomposition. It results in a modification of the surface of test specimens—organic compounds are produced and zinc atoms diffuse into the surface. During four-ball tests, advanced structural decomposition of ZDDP takes place—S and P take part in tribochemical reactions. Probably inorganic compounds are produced, whereas there is a lack of a layer of organic ones adsorbed on the surface. The generation of inorganic compounds results from chemical reactions of decomposed ZDDP with the surface of steel specimens as well as diffusion of some elements (e.g. S) into the surface. Good antiseizure properties of such inorganic structures help to improve the tribological characteristics under severe test conditions.