Vitamin A microencapsulation within poly(methyl methacrylate)‐g‐polyethylenimine microspheres: Localized proton buffering effect on vitamin A stability

To stabilize vitamin A in a cosmetic/dermatological formulation, we present here a new encapsulation method based on polymer microspheres having a localized “proton‐buffering” capacity. Poly(methyl methacrylate)‐g‐polyethylenimine (PMMA‐g‐PEI) was prepared by direct condensation grafting of PEI onto poly(methyl methacrylate‐co‐methyl acrylic acid). The reaction was confirmed by FT‐IR analysis showing the amide vibration at 1,550 cm^?1. Elemental analysis indicated that the weight content of the grafted PEI was 1.6% (w/w). Vitamin A was encapsulated into PMMA‐g‐PEI microspheres by using an oil‐in‐water (O/W) single emulsion method. The presence of PEI moiety dramatically improved the chemical stability of vitamin A in microspheres. Vitamin A encapsulated within PMMA‐g‐PEI microspheres maintained 91% of its initial activity after 30‐day incubation at 40°C, while only maintaining 60% within plain PMMA microspheres. This study demonstrates that proton‐buffering within hydrophobic polymer matrix is a useful strategy for stabilizing “acid‐labile” active ingredients. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 517–522, 2004     

Flaw-Tolerance and R-Curve Behavior of Liquid-Phase-Sintered Silicon Carbides with Different Microstructures

β-SiC powder containing 6 wt% A1₂O₃ and 4 wt% Y₂O₃ as sintering additives was pressureless sintered at 2000°C for 1 h (AYE-SiC) and 3 h (AYP-SiC). AYE-SiC consisted of an equiaxed grain structure and AYP-SiC exhibited a micro-structure with platelike grains as a result of grain growth related to β→α phase transformation during sintering, R -curve behavior and flaw tolerance for these silicon carbides were evaluated by the indentation-strength technique. For comparison, the R -curve behavior of conventional sintered, boron- and carbon-doped SiC (SS-SiC) was evaluated. AYE-SiC and AYP-SiC exhibited rising R -curve behavior with toughening exponents of m = 0.042 and m = 0.135, respectively. AYP-SiC exhibited better flaw tolerance and more sharply rising R -curve behavior than AYE-SiC. The more sharply rising R -curve behavior and the better flaw tolerance of AYP-SiC were attributed mainly to grain bridging of crack faces by platelike grains. Because of the high degree of transgranular fracture, SS-SiC exhibited a flat R -curve despite a microstructural feature with platelike grains.     

Morphology and activity of nanosized NdCl3 catalyst for 1,3‐butadiene polymerization

The binary lanthanide catalyst for 1,3‐butadiene was invented for 40 years ago. However, it has not been employed in commercial application due to its poor solubility and low activity. Nanosized neodymium chloride (NdCl₃) was prepared in tetrahydrofuran (THF) medium through dissolution, chelation, and colloidal formation steps. Anhydrous NdCl₃ was dissolved in THF, and ca. 1.5 THF molecules were coordinated. In the colloidal formation step, THF was slowly replaced with the addition of cyclohexane, and pale blue nuclei, nanosize below 200 nm, were formed. The structural studies for NdCl₃ · xTHF using X‐ray powder diffraction (XRD) and scanning electron microscope (SEM) indicate that high ordered crystallinity is decreased with reduced particle size from trigonal prismatic to porous sphere structure. Nano NdCl₃, obtained as colloidal state in cyclohexane, was activated with Al(iBu)₃ and Al(iBu)₂H at room temperature and employed for 1,3‐butadiene solution polymerization. The nanosized Nd catalysts showed high activity (1.0 ～ 1.3 × 10⁵ g/Nd mol · h), which is comparable to that of the ternary neodymium catalyst Nd(neodecanoate)₃/AlEt₂Cl/Al(iBu)₃. The microstructures of polybutadiene, cis, trans, and vinyl, are about 96.0, 3.5, and 0.5%, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1279–1283, 2005     

Novel positive‐working aqueous‐base developable photosensitive polyimide precursors based on diazonaphthoquinone‐capped polyamic esters

Novel positive‐working aqueous‐base developable photosensitive polyimide (PSPI) precursors based on partially diazonaphthoquinone (DNQ)‐capped polyamic esters bearing phenolic hydroxyl groups and a DNQ photosensitive compound (PIC‐3) were developed. The partially DNQ capped polyamic esters were prepared from an esterification reaction of 1,2‐naphthoquinone diazide‐5‐sulfonyl chloride with the polyamic esters. The partially DNQ capped polyamic esters decreased the dark film loss effectively in the aqueous‐base developer and were able to make thicker film resists compared to the uncapped polyamic esters. The 25 mol % DNQ‐capped BisAPAF–PMDA polyamic ester and BisAPAF–ODPA polyamic ester containing 25 wt % PIC‐3 photosensitive compound showed a sensitivity of 176 and 185 mJ/cm², and a contrast of 1.68 and 1.02, respectively, in a 3‐μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 5 μm was obtained from both PSPI precursor compositions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2293–2300, 2003     

多流形判别分析在人脸识别中的研究

局部保持投影LPP(Locality Preserving Projection)是一种有效的非线性降维方法,能够使投影降维后的数据与原输入空间中的相似局部结构保持一致,但是该方法没有充分利用类间样本点的权重等重要信息。为了解决这个问题,提出基于Fisher准则的多流形判别分析FMMDA(Fisher Multi-Manifold Discriminant Analysis)方法。结合Fisher准则训练样本类内拉普拉斯图和样本均值类间拉普拉斯图,既保持了原样本的相似局部结构,又充分地利用了不同类别之间的权重。在ORL及Yale人脸库上验证了该方法的有效性。与其他几种最先进的方法相比,FMMDA方法取得了更好的识别效果。     

心内膜三维几何模型交互式网格切割算法研究

针对心内膜三维标测系统中心内膜模型网格切割模块,提出一种新的交互式网格切割算法。系统在载入心内膜三维几何模型后初始化切割平板模型,由用户交互移动切割平板和旋转切割平板的法线。借助矩阵变换,针对心内膜三维几何模型实现能反映用户切割意图和保持网格细节特征的网格切割,而且切割平板可以消除锯齿效应。实验对比结果证明,该算法对于心内膜三维几何模型可以实现令用户满意的实时无锯齿交互式网格切割。     

THERMAL CONVECTIVE INSTABILITY IN TRANSLUCENT POROUS MEDIA WITH RADIATIVE HEAT TRANSFER

The onset of thermal convection in a translucent porous layer is considered. Attention is focused on the effect of radiative heat transfer on the critical Rayleigh-Darcy number and the convection cell shape. If we consider the contribution of radiative heat transfer, the basic temperature profile is non-linear and the thermal convective instability is influenced by the ratio of conduction to radiation heat flux, the temperatures at the boundary surfaces, and radiative parameters such as wall emissivity, scattering albedo and extinction coefficient as well as the usual Rayleigh-Darcy number. Effects of these parameters on the onset of convective instability are investigated with the help of linear stability theory employing the Darcy's law and the radiative transport equation simplified by the P₁ approximation. The increased effective thermal conductivity due lo the radiation inhibits the onset of convection and causes increased critical Rayleigh-Darcy number and decreased convection cell size. The results of the present work may be exploited to find out the optimal diameter of aerogel pellets and the air pressure in the double pane window filled with the translucent silica aerogel granules to suppress natural convection.     

Effect of molecular weight on two smectic polyesters

The liquid crystalline transitions of two kinds of smectic polyesters with different molecular weights were investigated by DSC, polarized microscopy and X-ray diffraction. The molecular weight affects the transitions significantly for these two kinds of polyesters. With a high enough molecular weight, both poly (pentamethylenep,p-bibenzoate) and poly(hexamethylenep,p-bibenzoate) exhibit an enantiotropic smectic phase, but the two endothermic transition peaks of the DSC heating curve seem to overlap. The polyesters tend to exhibit a monotropic smectic phase as the molecular weight decreases. From the DSC cooling curve, the isotropic-smectic transition can be seen more clearly. As the molecular weight decreases, the smectic order decrease significantly. The molecular weight affects the transitions in a different way for these two different kinds of polyesters.     

Synthesis and characterization of new aromatic polyimides containing well‐defined conjugation units

A series of aromatic polyimides composed of well‐defined conjugation units were synthesized form 5,5′‐bis(4‐aminophenyl)‐2,2′‐bifuryl (PFDA) and 2,2′‐bis(furyl) benzidine (FurylBZ) with various dianhydrides. The synthesized polyimides emit blue to green light with a quantum yield of 7.3–14.9%, depending on the polymer backbone. In particular, PFDA‐based polymers exhibit extremely narrow photo‐luminescence. The structure, thermal stability, refractive index and dielectric properties of the polymer films were also determined.     

Solid circulation characteristics in an internally circulating fluidized bed with orifice-type draft tube

Effects of superficial gas velocities to a draft tube, to an annulus section and particle size on the solid circulation rate (G,) have been determined in an internally circulating fluidized bed (0.28 m I.D. × 2m high) with an orifice type draft tube. The solid circulation rate from the draft tube to an annulus section increases with increasing gas velocities to the draft tube(U _d ) and annulus section (U_a) and consequent increase in pressure drop across the orifice (ΔP_or). However, the values ofG _s decrease by 7–21% with increasing particle size from 86 to 288 μm. The pressure drop across the orifice increases with increasingU _d andU _a . However, ΔP_or decreases by 5–23% with increasing particle size. To predictG _s in an internally circulating fluidized bed, a correlation is proposed as a function of ΔP_or This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement Korea University.