Statistical modeling of device mismatch for analog MOS integratedcircuits

A generalized parameter-level statistical model, called statistical MOS (SMOS), capable of generating statistically significant model decks from intra- and inter-die parameter statistics is described. Calculated model decks preserve the inherent correlations between model parameters while accounting for the dependence of parameter variance on device separation distance and device area. Using a Monte Carlo approach to parameter sampling, circuit output means and standard deviations can be simulated. Incorporated in a CAD environment, these modeling algorithms will provide the analog circuit designer with a method to determine the effect of both circuit layout and device sizing on circuit output variance. Test chips have been fabricated from two different fabrication processes to extract statistical information required by the model. Experimental and simulation results for two analog subcircuits are compared to verify the statistical modeling algorithms     

Double melting behavior of cyclic tris(ethylene terephthalate)

Summary Cyclic tris(ethylene terephthalate) (CTET) was separated from oligomeric extract of poly(ethylene terephthalate) by the conventional solvent separation method. The structure of CTET was characterized by differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy. It is shown that the double melting behavior of meltcrystallized CTET is attributed to the morphological change created by heat-treatment. The effect of the morphological change on the crystal structure of CTET was also examined.     

Impact of Aspen Log Storage with and without Protection on OSB Performance

Outdoor log storage without protection can change the mechanical and chemical properties of wood due to infection by various fungi. To understand how outdoor log storage affects the wood and, subsequently, the strandboard quality, two piles of aspen logs were set up outside and stored for a period of four months (July to November). One of the piles was treated with a biological solution to prevent fungal growth. The other one was stored without treatment. Both piles contained non-debarked and partially debarked logs. Evaluation of sap stain development indicated that all logs had been colonized by staining fungi with average stain coverage of 9.37 to 57.18% and maximum stain penetration of 3.58 to 7.27 cm over the log cross section. The variation of fungal colonization depended on log treatment and bark condition. The most effective way to prevent stain growth was the combination of biological treatment and partial debarking. A series of strandboard was prepared from fresh and aged aspen logs. All boards made from stored logs were statistically comparable to or superior to the control boards made from fresh aspen logs. The boards made from treated/partially debarked and untreated/non-debarked logs were statistically comparable to each other except for wet MOR. In addition, these two board types were statistically stronger than other boards made from treated/non-debarked and untreated/partially debarked logs in terms of IB and water resistance. Some individual stained strands were observed on the finished board surface. Less staining was found in the boards prepared from biologically treated and partially debarked logs, compared with those made from other stored logs.     

ARCGIS环境下基于DEM的流域特征提取

研究选取位于陕西省延安城南12 km处的万花乡向阳沟小流域。采用1∶10000大比例尺的比例尺5 m分辨率的DEM作为基本的地形数据,应用ESR I公司开发的ARCG IS地理信息系统软件进行流域特征的提取。经分析得到了研究区域河网特征以及研究区其它常用的流域特征信息,与实际河流水系特征基本吻合,认为应用DEM划分的流域结果是合理的。     

氧气顶吹转炉吹炼过程动态模型

通过炉气流量和成分的在线采样信息，用积分法计算熔池排出碳量，并根据熔炼体系中碳的守恒，动态推算熔池含碳量，由此来预报吹炼终点。较深入研究了提高炉气流量检测精度的方法，如心平衡修正和钢液成分反馈修正等，并采用了滤波算法，这些措施有利于提高动态模型的精度。     

CMOS low-power bandpass IF filter for Bluetooth

Design of a CMOS 18th-order IF (intermediate frequency) bandpass filter for integrated low-IF Bluetooth receivers is presented. The centre frequency and bandwidth of the filter are 3 and 1 MHz, respectively. The proposed filter is based on unity gain fully differential voltage buffers and provides efficient, low power and a small area design solution. The filter, including its automatic tuning circuit, occupies an area of 0.6 mm² in a standard 0.5 mum-CMOS chip. Experimental results show that the filter satisfies the selectivity and dynamic range requirements of Bluetooth while operating from a total supply current of 0.9 mA     

EXPLO-500T型拖拉机式地震钻机

万程欣,EXPLO-500T型拖拉机式地震钻机．物探装备，2006，16（4）：314-316 EXPLO—500T型拖拉机式地震钻机采用大马力拖拉机底盘、全液压控制，结构紧凑、操作简单、可靠性强、钻井效率高，特别适合林带、丘陵地区施工。     

Exponential Stability of Interval Dynamical Systems with Quadratic Nonlinearity

This article proposes an approach for investigating the exponential stability of a nonlinear interval dynamical system with the nonlinearity of a quadratic type on the basis of the Lyapunov’s direct method. It also constructs an inner estimate of the attraction domain to the origin for the system under consideration.     

Facile synthesis of ordered nanocrystalline alumina thin films with tunable mesopore structures

Mesoporous alumina layers have attracted attention for their potential use in ultrafiltration of salts, as a heterogeneous catalyst support, an adsorbent in environmental cleanup, and in petroleum refinement. The ability to control the fast hydrolysis rate of the inorganic precursors using simple and inexpensive routes is important for that potential to be realized. Herein, we introduce a novel and facile route to synthesize mesoporous alumina thin films from the combination of inexpensive and commercially available copolymer with aluminum chloride or nitrate (salts) in an EtOH–surfactant–NH₃ · H₂O–salts (EsNs) system through the evaporation-induced self-assembly (EISA) method. Mesoporous alumina layers obtained utilizing the EsNs system have ordered and tunable pore structures. The ability to easily control the mesophases of the alumina layers within a short time provides distinct advantages over previously reported synthesis procedures. Most importantly, we demonstrate that the binding of surfactant and NH₃ · H₂O for the formation of hydrogen bond between them in the EsNs system controls the fast hydrolysis rate of the inorganic species. This allows for the synthesis of nanocrystalline alumina layers via the aluminum oxo-clusters’ assembly with the surfactant. Such simple route may be applied in the synthesis of other non-silica mesostructured oxides.