Effect of nitrogen and nickel on the stability of an Fe-12Cr-23Mn austenitic steel

The effect of nitrogen and nickel on the austenite stability and the structural changes as a result of cold work of an Fe-12Cr-23Mn alloy steel has been examined by transmission electron microscopy and X-ray analysis. Prestrain was performed either at room temperature or at 200° C. Final strain was carried out at liquid nitrogen temperature. The volume fraction of strain-induced martensite decreased by 40% and 12% due to the addition of 2.43% Ni and 0.11% N, respectively, despite whether prestrain was performed or not. The mechanisms are discussed in terms of the phase, stacking faults, dislocation cells and dislocation tangles induced by prestrain and final strain.     

Stability and work hardening of an Fe-12Cr-23Mn austenitic steel

The effect of pre-strain on the strain-induced martensitic transformation of an Fe-12Cr-23Mn austenitic steel has been investigated through transmission electron microscopy and X-ray analysis. Pre-strain was performed either at room temperature or at 200° C. Final strain was carried out at liquid-nitrogen temperature. The phase was shown to form on {1 1 1} planes of the austenite matrix predominantly by overlapping of stacking faults. The martensite transformation sequence was . Nucleation of the phase mainly occurred at intersections of bands. Austenite stability was shown to increase by pre-strain at 25° C or 200° C. Pre-strain at 200° C has a greater effect on austenite stability than does pre-strain at 25° C. The mechanism was discussed in terms of martensite transformation rate and various substructures introduced during straining. Work hardening was shown to depend on the degree of pre-strain and final strain. The correlation between work hardening and substructures introduced during straining was examined.     

高温钎料PdCu-Ti在氧化铝陶瓷上的润湿性及界面反应

本文采用座滴法试验研究了合金系统ＰｄＣｕ－Ｔｉ在Ａｌ２Ｏ３上润湿性的变化规律，探讨了界面冶金及结合等行为，运用热力学理论对结果进行了分析，随Ｔｉ含量的增加及Ｐｄ含量的减少润湿角逐渐降低，Ｔｉ的加入使界面发生了一个双重变化；液相侧富氧，钛吸收层的生成及随后的固相侧氧化钛的生成，只有界面上生成一氧化钛，才能有较好的润湿行为和较强的结合力。     

小型储气罐火灾工况数值模拟分析

以某输气管线气液联动执行机构中的储气罐为例,利用Ansys Fluent软件建立同比例三维模型,模拟火灾工况下,外部热量不断输入,罐内压力和罐体温度随时间的变化情况。利用Aspen Hysys软件模拟计算该小型储气罐在火灾工况下安全泄放所需的最小安全阀口径。结果表明,当钢制储气罐外部发生火灾时,罐体温度和罐内压力急剧升高,在很短的时间内就能达到储气罐坍塌温度和储气罐设计压力;达到钢制储气罐坍塌温度的时间滞后于达到储气罐设计压力的时间;从安全的角度,设置安全阀可安全有效泄放气体,即使储气罐发生坍塌,也有助于降低事故发生的危害程度;确定的安全阀最小口径为0.03 cm²,建议选型的安全阀口径不低于0.05 cm²。     

一种基于VINS/FINS组合导航方法

针对视觉惯性组合导航系统中微惯性器件精度偏低,以及足部惯性导航系统航向角误差可观测性差的问题,研究了一种基于上述两种系统的信息双向融合的导航定位方案. 该方法的系统结构由安装于双足步行机器人躯干部分的惯性导航系统和安装于其足部惯性导航系统两部分组成. 惯性导航系统通过视觉同时定位与地图构建数据融合方法可以获得相对准确的航向角,足部惯性导航系统利用零速修正后的位置信息实时修正惯性导航系统中的低精度惯性器件误差,从而构建视觉与惯性信息双向融合的组合导航系统结构. 实验结果表明,该组合导航方案可以有效提高双足步行机器人的航向精度和定位精度.     

二氟草酸硼酸锂的降酸度工艺研究

针对二氟草酸硼酸锂(LiDFOB)研究及生产中存在产品酸度高的问题,单纯通过粗品提纯降低酸度,成本高,效果不佳.通过优化反应、除酸与粗品提纯相结合的方法降低酸度.研究了反应物种类、锂盐量、降酸剂、结晶对产品酸度的影响.结果表明:三氟化硼(BF3)为含氟试剂,草酸锂(Li2 C2 O4)过量6％,碳酸锂(Li2 CO3)除酸,一次结晶条件下,LiDFOB酸度为94×10-6,产品指标合格,工艺可行.     

An Eco-Friendly Approach to the Control of Pathogenic Microbes and Anopheles stephensi Malarial Vector Using Magnesium Oxide Nanoparticles (Mg-NPs) Fabricated by Penicillium chrysogenum

The discovery of eco-friendly, rapid, and cost-effective compounds to control diseases caused by microbes and insects are the main challenges. Herein, the magnesium oxide nanoparticles (MgO-NPs) are successfully fabricated by harnessing the metabolites secreted by Penicillium chrysogenum. The fabricated MgO-NPs were characterized using UV-Vis, XRD, TEM, DLS, EDX, FT-IR, and XPS analyses. Data showed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with sizes of 7–40 nm at a maximum wavelength of 250 nm. The EDX analysis confirms the presence of Mg and O ions as the main components with weight percentages of 13.62% and 7.76%, respectively. The activity of MgO-NPs as an antimicrobial agent was investigated against pathogens Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans, and exhibited zone of inhibitions of 12.0 ± 0.0, 12.7 ± 0.9, 23.3 ± 0.8, 17.7 ± 1.6, and 14.7 ± 0.6 mm respectively, at 200 µg mL⁻¹. The activity is decreased by decreasing the MgO-NPs concentration. The biogenic MgO-NPs exhibit high efficacy against different larvae instar and pupa of Anopheles stephensi, with LC50 values of 12.5–15.5 ppm for I–IV larvae instar and 16.5 ppm for the pupa. Additionally, 5 mg/cm² of MgO-NPs showed the highest protection percentages against adults of Anopheles stephensi, with values of 100% for 150 min and 67.6% ± 1.4% for 210 min.     

耐腐蚀高压柱塞泵用新型双相不锈钢的研究

叙述了新型双相不锈钢－ＷＳＤ钢的组织及其耐蚀性能。试验结果表明，ＷＳＤ钢在氯化物介显示出优异耐蚀性能，其抗点蚀性能远超过Ｃｒ１３，１８－８Ｔｉ，３１６Ｌ等钢种，达到国外Ａｌ－６Ｘ，ＳＡＦ２２０５等钢种的水平。     

关于南京钢铁厂高炉长寿途径的浅见

针对南京钢铁厂高炉寿命较短的现状及国内外长寿高炉的经验，提出南钢高炉在改善原燃料条件下，提高高炉操作水平，改进炉体各部的设计，提高施工质量，加强日常维修，以达到高炉长寿的建议。     

Nd：NaR（WO4）2晶体光谱性能研究（R=Bi，Y）

采用提拉法生长出了掺钕钨酸铋钠（分子式Nd：NaBi（WO4）2，简称Nd：NBW）和掺钕钨酸钇钠（分子式Nd：NaY（WO4）2，简称Nd：NYW）晶体。通过TG-DTA分析得到Nd：NBW的熔点为936．2℃，Nd：NYW的熔点为1209．07℃。由吸收光谱可以看出，Nd：NBW在802nm有较强的吸收峰，Nd：NYW在804nm，752nm，586nm附近有较强、较宽的吸收峰，二者均适合于LD泵浦；并计算了晶体中Nd^＋3＋的吸收截面积。通过比较Nd：NBW和Nd：NYW的红外光谱和拉曼光谱结果，认为二者结构基本相同，为四方晶系、白钨矿结构、141/a空间群。