Characteristic modes and flow structure of non-premixed flame in humid-air combustion

An experimental study has been performed in order to determine the effect of humidity on the flow field and the flame stability limit in turbulent non-premixed flame. Two-dimensional Particle Image Velocimetry (PIV) measurements were made to quantify the velocity field, with and without steam injected. The results indicate the addition of steam decreases the recirculation flow and reduces the distance between the forward and aft stagnation points. The detailed stabilization regimes show that the critical fuel-to-air velocity ratios of the central fuel penetration in the humid air case are 16% to 22% lower, and the partially quenching limits are at least 25% lower. The decreased penetration limit is due to a reduction in momentum of the humid air. An analysis of flamelet concepts reveals that increased chemical reaction time leads to lower partially quenching limits in the humid air combustion.     

NC74-1型氨合成催化剂的升温还原及应用

介绍了NC74-1氨合成催化剂在山东华鲁恒升化工股份有限公司大氮肥氨合成的装填、升温还原及使用情况。     

智能电网建设时期的需求侧管理

电力需求侧管理从20世纪70年代以来已经逐渐成为发达国家电力行业规范管理模式,我国目前处在发展时期。国家电网“建设坚强的智能电网”工作针对需求侧管理制定“全覆盖、全采集、全预付费”的总体目标,这是智能电网建设的重点环节,其推行对智能电网建设的目标起着举足轻重的作用,建设与发展必须与智能电网的长远规划保持高度一致。本文分析了传统需求侧管理的特点及局限性,以及为配合智能电网建设工作的开展,基于智能电网构架下电力需求侧管理所需的技术变革。     

Influence of deposition pressure on properties of ZnO: Al films fabricated by RF magnetron sputtering

Transparent conductive aluminum doped zinc oxide(ZnO:Al,AZO) films were prepared on glass substrates by rf(radio frequency) magnetron sputtering from ZnO: 3wt% Al_2O_3 ceramic target. The effect of argon gas pressure(PAr) was investigated with small variations to understand the influence on the electrical, optical and structural properties of the films. Structural examinations using X-ray diffraction(XRD) and scanning electron microscopy(SEM) showed that the ZnO:Al thin films were(002) oriented. The resistivity values were measured by four-point probe with the lowest resistivity of 5.76×10~(-4) Ω?cm(sheet resistance=9.6 Ω/sq. for a thickness=600 nm) obtained at the PAr of 0.3 Pa. The transmittance was achieved from ultravioletvisible(UV-VIS) spectrophotometer, 84% higher than that in the visible region for all AZO thin films. The properties of deposited thin films showed a significant dependence on the PAr.     

四维混沌系统及其在图像加密中的应用

传统基于低维混沌系统的图像加密算法往往具有密钥空间较小、安全性较差的问题。针对这些问题,首先提出了一类新的平衡点不稳定的四维离散混沌系统,通过数值仿真对该类系统进行了动力学行为分析,正的Lyapunov指数的个数可以达到三个。同时并基于该类混沌系统设计了一个新的图像加密方案,并进一步对明密文的分布直方图、相关系数、信息熵以及加密方案对参数的敏感性进行了分析。分析结果表明,该加密方案抵抗外来攻击的能力强,密钥空间可达2996△,具有较高的安全性。     

微波加热法合成蜂窝状堇青石载体Al2O3涂层

采用微波加热法在堇青石蜂窝陶瓷基体表面涂覆多孔Al2O3涂层,研究了制备条件对堇青石蜂窝陶瓷表面Al2O3涂层中Al2O3的质量分数的影响。通过BET、SEM对涂层结构及形貌进行了表征,结果表明,采用微波加热法制备的Al2O3涂层均匀、稳定,具有较大的比表面积、孔容和较高的Al2O3质量分数。     

Effect of poling on piezocatalytic removal of muti-pollutants using BaTiO3

The BaTiO₃ powder was prepared via a solid-state reaction route. It was studied for the degradation of bacterial cells, dye, and pharmaceuticals waste using ultrasonically driven piezocatalytic effect. The bacterial catalytic behavior of poled BaTiO₃ was remarkably increased during ultrasonication (10% E coli survival in 60 minutes). The structural damages were illustrated using scanning electron micrographs of bacterial cells which demonstrated morphological manifestations under different conditions. Methylene blue (MB dye), ciprofloxacin and diclofenac were also cleaned using the piezocatalytic effect associated with the poled BaTiO₃ powder. Around 92, 85, and 78% of degradations were observed within 150 minutes duration for methylene blue, ciprofloxacin, and diclofenac, respectively.     

A novel spherical-ordered macroporous CuO nanocatalyst for the electrochemical reduction of carbon dioxide

Journal of Applied Electrochemistry - The electrocatalytic reduction of CO2 is a promising research direction in resource utilization and sustainable energy development. However, there is still a...     

Ti、Mo、W、Cr及其合金镀层与超硬磨料之间结合性能的研究

本文在研究金属与超硬磨料之间作用的基础上，讨论了实现镀层与磨料形成强力结合的条件，为高性能超硬工具的制造提供了理论和实践依据。     

一种新型金刚石磨具树脂结合剂的制备

本文介绍了一种新型的操作工艺简单、耐水、耐热、耐酸碱溶液的环氧树脂结合剂的制备方法：结合剂采用环氧树脂和聚酰胺固化体系，并用液体端羧基丁腈橡胶(CTBN)对环氧树脂进行改性，在固化剂中添加改性固化利A提高固化物的耐热性。此树脂结合剂初始固化温度为3min，成型方便，是一种适于异形金刚石磨具使用的树脂结合剂C在150℃固化3h并在室温放置1天后，固化物具有高的硬度和耐热性以及优异的粘接性能，可以在150℃长期使用。