POI共建LTE双路室分系统建设成本分析

详细论述了POI系统实现原理、POI系统技术特点、LTE室分双路常见解决方案;结合工程实际案例,着重论述了多家运营商是如何通过POI共建室分系统实现LTE室分双路建设方案的;详细分析了POI共建节约室分建设投资情况,为LTE双路室分系统共建方案的选取提供宝贵经验。     

An amphoteric poly(VAc‐DBM‐AM‐DMAPS) emulsion focusing on the ecological sand‐fixing in salty desert: Structure and properties

In order to control the impacts of blown sand in salty desert, in this article, the amphoteric emulsion, for the first time, was applied as an ecological sand‐fixing material. This study started from the synthesis of the poly{vinyl acetate‐dibutyl maleate‐acrylamide‐co‐3‐[N‐(2‐methacroyloylethyl)‐N, N‐dimethylammonio]‐propane sulfonate} [P(VAc‐DBM‐AM‐DMAPS)] copolymer emulsion. Then, the structures, composition, thermal property of the emulsion were characterized by ¹H‐NMR, FTIR, and DSC, respectively. The basic properties of the emulsion and salt tolerance of the latex films were measured by using viscometer, dynamic light scattering, and laser Doppler electrophoresis also. And the sand‐fixing properties of the emulsion were evaluated. Finally, the influence of the emulsion on the growth of soil microbe and plants were discussed for understanding its ecological effect. The experimental results showed that the emulsion has been successfully synthesized and could be as an ecological sand‐fixing material. The related reason is that, first, the emulsion could significantly improve the compressive strength and water retaining; second, the emulsion had good thermal aging, freeze‐thaw stabilities and salt tolerance to withstand the changes in temperature and NaCl concentration of salty desert; third, the influence of the emulsion on the growth of plants and microbe of sand also showed a dependable ecological effect. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43715.     

热处理对双辊铸轧ZK60镁合金组织及阻尼性能的影响

采用双辊铸轧法制备了ZK60镁合金条带,采用金相显微镜(OM)和动态机械分析仪(DMA)研究了热处理后ZK60镁合金条带的组织和阻尼性能。退火处理后,组织较为均匀。T6处理后组织转变为均匀的等轴晶。在温度-阻尼谱中出现了2个温度阻尼峰,P1峰为弛豫型阻尼峰,其激活能为132 kJ/mol,P2峰为非弛豫型再结晶阻尼峰。T6处理条件下,时效时间为6 h时,呈现典型的位错型应变-阻尼图谱;在其他时效时间下,呈现2种混合位错型的应变-阻尼图谱。T6态双辊铸轧ZK60镁合金的应变-阻尼性能遵循G-L理论。     

Design and simulation of thermal residual stresses of coatings on WC-Co cemented carbide cutting tool substrate

Large thermal residual stresses in coatings during the coating deposition process may easily lead to coating delamination of coated carbide tools in machining. In order to reduce the possibility of coating delamination during the tool failure process, a theoretical method was proposed and a numerical method was constructed for the coating design of WC-Co cemented carbide cutting tools. The thermal residual stresses of multi-layered coatings were analytically modeled based on equivalent parameters of coating properties, and the stress distribution of coatings are simulated by Finite element method (FEM). The theoretically calculated results and the FEM simulated results were verified and in good agreement with the experimental test results. The effects of coating thickness, tool substrate, coating type and interlayer were investigated by the proposed geometric and FEM model. Based on the evaluations of matchability of tool substrate and tool coatings, the basic principles of tool coating design were proposed. This provides theoretical basis for the selection and design of coatings of cutting tools in high-speed machining.

     

基于FWD的半刚性基层开裂状况无损评价模型

为无损判别半刚性基层开裂状况,以落锤式弯沉仪(FWD)为平台反演基层模量,分析弯沉盆匹配法和规律法模量反演结果的差异,进行基层反演模量与开裂状况的相关性分析,以基层模量比为评价指标,建立基层开裂状况无损评价模型和评价标准。研究表明：铣刨后的半刚性基层表面可视化损坏模式主要为裂缝;与弯沉盆匹配法相比,弯沉盆规律法的模量反演结果唯一且土基模量变异性较低;基层模量比与基层开裂状况在半对数坐标下具有良好的线性关系;基层开裂状况可分为四类,基层模量比分界值分别为0.68、0.47、0.30。该评价模型适用于不同强度的半刚性基层损坏状况的无损判别,可为路面大中修设计是否翻修半刚性基层提供决策支持。     

高压喷射注浆技术在灰岩地区的应用

介绍了高压喷射注浆技术的应用历史、工作机理及其在灰岩地区的应用实例.     

Active control of hydraulic oil contamination to extend the service life of aviation hydraulic system

The hydraulic system is the control center of aircraft, the performance of which is critically dependent on the purity of the oil that flows through it. Contamination of hydraulic system oil has been known to be the primary cause of catastrophic failure and accidents. A review of literature in the area of hydraulic oil contamination reveals three facts: (i) there is a dearth of effective methods to prevent intrusion of external contaminants into the hydraulic oil, (ii) there are no effective purification methods for liquid and gaseous contaminants of oil, and (iii) there is an absence of real-time monitoring for major contaminants. This work systematically reviews the hazards, sources, and removal methods of major contaminants, especially of gaseous contaminants. An active method to control oil contamination is proposed instead of the existing passive maintenance techniques that are ridden with problems. In a case study of aviation hydraulic system, our active control system comprises (i) a closed hydraulic circuit and a closed oil tank to prevent the intrusion of external contaminants, (ii) a vacuum centrifuge to efficiently remove contaminants without creating consumption costs, and (iii) monitoring devices installed to actively monitor the contaminant content in oil during operation. The results from the purification experiments and three-dimensional modeling indicate that the active control of hydraulic oil contamination can effectively remove 98.4% solid contaminants and reduce the water content below 50 ppm, and in particular reduce the gas content below 2%. It is obvious that this method can improve the continuous operation capability of aviation hydraulic systems and extend the intermaintenance period of aircrafts by reducing the contaminant content in oil.     

Impedance Spectroscopy of (Bi1/2Na1/2)TiO3–BaTiO3 Ceramics Modified with (K0.5Na0.5)NbO3

The electrical and dielectric properties of (1 ? x)(0.94Bi_1/2Na_1/2TiO₃–0.06BaTiO₃)–x(K_0.5Na_0.5NbO₃) with x = 0, 0.03, 0.09, 0.18 have been investigated by impedance spectroscopy over a wide temperature range. The dc conductivity of the ceramics follows the Arrhenius law with an activation energy ranging from ~1.20 to 1.50 eV. Measurements under different atmospheres show the materials exhibit n‐type semiconducting behavior at elevated temperatures. The presence of a highly polarizable phase for all compositions is revealed by electric modulus (M″) spectra. The Burns temperature decreases with increasing KNN content. The change in temperature‐dependent permittivity with composition is explained by the difference in thermal evolution of polar nanoregions induced by the addition of KNN.     

Biosorption mechanism of Zn2+ from aqueous solution by spent substrates of pleurotus ostreatus

To solve the problem of heavy metal pollution and agricultural wastes reclamation, spent substrate of pleurotus ostreatus (SSPO) was used as adsorbent to remove Zn²⁺ from aqueous solution. The biosorption of zinc ions on SSPO was studied as a function of the solution pH, temperature and initial Zn²⁺ concentration. The equilibrium sorption data were well represented by linear Langmuir isotherm models with R² value of 0.9955 and non-linear Freundlich with R² value of 0.9973. The BET surface area of SSPO can reach 51.16m²g^?1. SEM-EDX and XRD revealed that (NH₄)₂Zn·H₂O and Zn₂PO₄(OH) were the main compounds in metal-loaded SSPO. FTIR analysis indicated the governing functional groups such as O-H, N-H and P=O played an important role in biosorption. The desorption studies showed the reversibility of SSPO. The results indicate that SSPO is a potential adsorbent in wastewater treatment due to its great sorption capacity and low cost.     

新型钛系聚酯催化剂的催化性能研究

合成了一种应用型钛系聚酯(PET)催化剂TY,考察了在PET合成中催化剂TY对酯化时间、缩聚时间、产品性能等的影响;并与传统锑系催化剂三氧化二锑(Sb2O3)的性能进行了对比。结果表明:钛系催化剂TY不仅能缩短酯化时间和聚合时间,而且催化剂用量少、催化活性高;钛系催化剂TY用量为20~25μg/g时,催化活性最佳,催化剂TY 20~25μg/g的催化活性相当于Sb2O3350~400μg/g的催化活性;钛系催化剂合成的PET切片的特性黏数达0.683 d L/g,与锑系PET相比,色相L值提高达71.68,b值相差不大,端羧基含量及二甘醇含量降低,结晶行为及热性能相当;钛系催化剂TY适合无重金属聚酯的工业生产,工业应用性强。