用线性状态观测器重构交流矢量控制系统中的负载扰动

在异步电动机磁场定向数学模型的基础上,给出了恒磁条件下异步电动机的解耦模型及传动系统的线性状态方程,并提出了重构负载扰动转矩的线性状态观测器。利用重构的负载转矩在矢量控制系统中进行扰动前馈,明显地提高了系统的抗负载扰动能力,从而为进一步提高矢量控制系统的动态性能开辟了一条有效的途径。     

铜蒸汽激光器双闸流管触发系统的研究

研制成用于钢蒸汽激光器的双间流管触发系统。用两个闸流管并联进行交替触发，总输入电功率达7．8kW。低功率运行时，激光器的效率为0．6％与单间流管激光器的效率一致。     

对数型产量衰减曲线方程的建立与应用

在产量衰减曲线方程的基础上，通过数学推导，得到了一种对数型产量减曲线方程。方程既可以用来预测油气田整个开发阶段的指标，又可以比较准确的测算油气田的可采集量。对国内外一些油田的实际应用表明，对数型产量衰减曲线方程是十分实用和有效的。     

Boundary formulations for shape sensitivity of temperature dependent conductivity problems

Used in concert with the Kirchhoff transformation, implicit differentiation of the discretized boundary integral equations governing the conduction of heat in solids with temperature dependent thermal conductivity is shown to generate an accurate and economical approach for computation of shape sensitivities. For problems with specified temperature and heat flux boundary conditions, a linear problem results for both the analysis and sensitivity analysis. In problems with either convection or radiation boundary conditions, a non-linear problem is generated. Several iterative strategies are presented for the solution of the resulting sets of non-linear equations and the computational performances examined in detail. Multi-zone analysis and zone condensation strategies are demonstrated to provide substantive computational economies in this process for models with either localized non-iinear boundary conditions or regions of geometric insensitivity to design variables. A series of non-linear example problems is presented that have closed form solutions. Exact anaytical expressions tor the shape sensitivities associated with these problems are developed and these are compared with the sensitivities computed using the boundary element formulation.     

Quantitative NMR spectroscopy by matrix pencil methods

The matrix pencil (MP) method, based on the singular value decomposition (SVD), is applied to quantitative NMR spectroscopy. Its relationship to other SVD-based methods is also presented. Simulations and applications are given to demonstrate the capability of superior performance.©1993 John Wiley & Sons Inc     

方盒形带凸缘件的板料形状优化设计

本文用大变形刚塑性有限元模拟正方形板料在方冲头拉延下的凸缘变形过程，并以所获得的工件形状与金属流动方向为依据，对初始板料形状进行修正。对修正后的坯料形状进行二次模拟，获得了与给定凸缘形状基本吻合的拉延件形状。文中对不同凸缘圆角对极料优化形状的影响作了计算，讨论了在保证边界轮廓位置不变的条件下网格划分的方法。     

红外光控器在蜜丸包装机上的应用

中药大蜜丸及所用包装材料软、粘、轻、小、光,较难实现机械化自动包装。通常的监控方法不适合蜜丸的自动包装。采用红外线光电控制器,解决了自动包装蜜丸时出现的瞬间无纸、无丸等自动控制。     

Myofibroblast accumulation induced by transforming growth factor-beta is involved in the pathogenesis of nasal polyps

Myofibroblasts that express alpha-smooth muscle actin (alpha-SMA) are detected in many chronic inflammatory diseases. Transforming growth factor-beta (TGF-beta) is a potent inducer of myofibroblast accumulation in tissues. In this study, scattered myofibroblasts and TGF-beta were quantified and localized in nasal polyps (NPs) and normal nasal mucosa (NM). NPs were sampled in 16 patients during ethmoidectomy and NM was obtained from 10 control subjects during rhinoplasty. alpha-SMA and TGF-beta were detected using immunohistochemistry and the numbers of labeled cells were quantified (alpha-SMA and TGF-beta indices) and compared between NPs and NM. In eight NPs, in which the pedicle was preserved, alpha-SMA and TGF-beta were evaluated and compared in the pedicle, central, and tip areas. Finally, TGF-beta expression was compared between low (zone 1), moderate (zone 2), and high (zone 3) zones of alpha-SMA positivity. alpha-SMA and TGF-beta indices were significantly higher in NPs than in NM. In the eight selected NPs, alpha-SMA-positive cells were significantly more abundant in the pedicle than in the central and tip areas, whereas TGF-beta-positive cells were significantly more numerous in the pedicle than in the tip area. The number of TGF-beta-positive cells was significantly higher in zone 3 than in zone 1 of alpha-SMA positivity. Myofibroblasts, which are abundant in NPs but rare in NM, could be involved in the growth of NPs by inducing extracellular matrix accumulation. The local development of myofibroblasts in NPs could be controlled by TGF-beta, locally produced by inflammatory cells.     

数据融合在C^3I系统中的应用

多传感器数据融合技术已在军事领域受到广泛重视，并逐步走向实际应用，本文简要介绍它的一般组成、特点以及在军事Ｃ＾３Ｉ系统应用中的主要功效。     

用基团贡献法预测纯物质蒸气压

对应状态原理与基团贡献法结合，提出一个新的蒸气压估算方程（ＲＬＹＭ）。通过对烷烃、烯烃、炔烃、环烷烃、环烯烃、醇、环醇、酮、醚、芳烃、酚、萘在内的１７４种有机物质蒸气压实验数据的关联，获得了３０种基团的贡献参数值。新模型的预测精度优于现有的对应状态法，并且对高碳分子仍有较好的估算精度。总的关联误差小于１．１７％。