Synthesis of p‐aminophenol from the hydrogenation of nitrobenzene over metal–solid acid bifunctional catalyst

BACKGROUND: A single‐step conversion of nitrobenzene (NB) to p‐aminophenol (PAP) through catalytic hydrogenation is a widely used synthesis route for PAP. The main shortcoming of this route is the use of sulfuric acid for rearrangement of the phenylhydroxylamine (PHA) intermediate. In this paper, S₂O₈^2?/ZrO₂ (PSZ) solid acid and Pt‐S₂O₈^2?/ZrO₂ (Pt‐PSZ) bifunctional catalysts were prepared for the synthesis of PAP in non‐acid medium. RESULTS: Calcination temperature has a substantial effect on the acidity, structure and activity for PHA rearrangement of PSZ. The highest PAP yield was 33.8% over PSZ calcined at 823 K when the reaction was carried out in water at 423 K. A high PAP yield of 23.9% was achieved by a single‐step reaction of nitrobenzene over Pt‐PSZ bifunctional catalysts. CONCLUSION: PSZ solid acid exhibits high activity for PHA rearrangement. Perfect tetragonal ZrO₂ and much stronger acid sites play important roles in catalytic activity. Inhibiting the hydrogenation activity by reducing the amount of Pt loading on Pt‐PSZ can improve the competition of PHA rearrangement on acid sites with hydrogenation of PHA on metal active sites, resulting in better selectivity to PAP. Copyright © 2008 Society of Chemical Industry     

A Customized Radiation Sensor for Ionization Collection

The measurement of absorbed doses is fundamental to radiation biology and oncology. A customized parallel plate radiation sensor was designed and fabricated as a precursor to investigating novel materials, such as carbon nanotubes, as a substitute for conventional metallic conducting plates or active volume medium. This sensor contains two thick and large-area electrodes that provide the sensor with a good signal-to-noise ratio. The 6 MV and 15 MV photon beams produced by a Varian Clinac 21 EX medical linear accelerator were used in the experiments. The linear accelerator was calibrated such that 1 monitor unit (MU) produces 1 cGy of dose in water with depth of 5 cm for a calibration geometry of source-to-axis distance equal to 100 cm and 10times10 cm² field size at the point of measurement. Ionization measurements were performed by varying the bias voltages, electrode separations, exposures, and angles of the incident beam to characterize the sensor. Signal saturation characteristics of the sensor with different electrode separations and exposures were investigated. This sensor displayed excellent linear response to exposure up to 600 MU. An analytical modeling using the pencil beam model and simulations based on device configuration were given to explain the results. In oblique incident beam experiments, the prototype sensor showed an accurate response compared to simulation results for a small field size of 1times1 cm². The sensor was tested to be suitable in the study of ionization collection efficiencies for different materials     

小麦胚的营养价值及应用开发

小麦胚是小麦籽粒的精华，本文论述了小麦胚蛋白和小麦胚芽油的营养价值、制取及其开发利用，并分析了小麦胚资源开发利用存在的问题及其途径。     

Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)

Poly(arylene ether benzonitrile) (PAEBN) was synthesized with 2,6‐dichlorobenzonitrile and biphenol. PAEBNs with various molecular weights (MWs), 1,640,000 and 185,000 g/mol, were synthesized by control of the stoichiometry of the monomers and were blended with sulfonated poly(ether ether ketone) (SPEEK). The effects of MW on the water uptake, swelling, methanol permeability, and proton conductivity of the SPEEK/PAEBN blend membranes were investigated. The molecular mobility of the SPEEK/PAEBN blends was also examined in this study. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

在备件招标采购中运用"定质比价法"初探

针对公司在备件采购中存在的质量、价格等问题，探讨了如何使用“定质比价法”这一新的招标采购方法来提高备件质量、降低成本。     

Syntheses and Structural Characterization of Triorganotin Derivatives of Bis(carboxymethyl)trithiocarbonate: X-ray Crystal Structures of 2D Network Polymers

Six triorganotin(IV) complexes of the type {(R₃Sn)₂[C₃S₃(COO)₂]}_n (R = C₆H₅ 1; n-Bu 2; PhCH₂ 4; p-F-PhCH₂ 5; o-F-PhCH₂ 6) and {(R₃Sn)₂[C₃S₃(COO)₂]}_n·[EtOH] (R = Me 3) have been synthesized by the reaction of bis(carboxymethyl)trithiocarbonate with triorganotin(IV) chloride in the presence of sodium ethoxide. All complexes were characterized by elemental analysis IR, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. Except for 4–6, all complexes were also characterized by X-ray crystallography. The X-ray date revealed that complexes 1–3 show two-dimensional network polymeric structure in which the geometries of tin atoms are trigonal bipyramid with the axial positions occupied by carboxylic oxygen atoms.     

c-BN color change with bonded water added into the h-BN–Mg system

Cubic boron nitride (c-BN) crystals were synthesized in conditions of high temperature and high pressure (HTHP) when different kinds of bonded water were respectively added into the system of h-BN–Mg. All bonded water used in this work could reduce the temperature of growing c-BN compared to that in the system of h-BN–Mg. The c-BN color could change from black to yellow when certain amounts of bonded water, such as NiSO₄·6H₂O and CuSO₄·5H₂O, Mg(OH)_2, were added. However, c-BN color remained black no matter how much bonded water, such as NiCl₂·6H₂O, CuCl₂·2H₂O, and SnCl₂·2H₂O, was added. The bonded water can be classified into Chlorine-containing bonded water (Cl-BW) and Chlorine-free bonded water (ClF-BW) according to their different characters and effects on the synthesized c-BN color.     

无氢类金刚石碳膜的研究进展

介绍了无氢类金刚石碳膜的制备方法 ,它们的机械、光学、电学性能 ,将无氢与含氢的类金刚石碳膜进行了简单比较 ,总结及探讨了它们的应用     

企业信息化中的网络存储整合应用

首先介绍了网络存储技术中NAS技术和SAN技术的基本原理,并对两者的特性进行了比较;然后详细介绍了企业信息化过程中网络存储整合的一个典型案例,分析了其整合前存在的不足,制定有效的整合实施方案,并对实施过程中许多关键技术部分进行了阐述,最终很好的达到了预定目标;最后总结了网络存储整合需要规划多种技术相融合的必要性.