音频大地电磁测深在某隧道工程中的应用

音频大地电磁(AMT)在隧道的工程地质勘察是一种非常有效的方法,它具有不受高阻屏蔽、轻便、探测深度相对较大等优点,在宏观上可以查明隧道地层岩性分界、地质构造及其赋水性。以某隧道音频大地电磁勘察为例,分别对AMT的采集手段、工频干扰去噪、静态校正、反演方法等关键技术问题进行分析,并结合实际资料对该工作区的地层分布、断层及其破碎带的赋水情况等进行分析和解释,在其应用中取得了理想的效果。     

Theoretical Investigation of the Viscous Damping Coefficient of Hydraulic Actuators

The viscous damping coefficient(VDC) of hydraulic actuators is crucial for system modeling,control and dynamic characteristic analysis.Currently,the researches on hydraulic actuators focus on behavior assessment,promotion of control performance and efficiency.However,the estimation of the VDC is difficult due to a lack of study.Firstly,using two types of hydraulic cylinders,behaviors of the VDC are experimentally examined with velocities and pressure variations.For the tested plunger type hydraulic cylinder,the exponential model B=αυ~(-β),(α0,β0)or B=α_1e~(-β_1υ)+α_2e~(-β_2υ)(α_1,α_20,β_1,β_20),fits the relation between the VDC and velocities for a given pressure of chamber with high precision.The magnitude of the VDC decreases almost linearly under certain velocities when increasing the chamber pressure from 0.6 MPa to 6.0 MPa.Furthermore,the effects of the chamber pressures on the VDC of piston and plunge type hydraulic cylinders are different due to different sealing types.In order to investigate the VDC of a plunger type hydraulic actuator drastically,a steady-state numerical model has been developed to describe the mechanism incorporating tandem seal lubrication,back-up ring related friction behaviors and shear stress of fluid.It is shown that the simulated results of VDC agree with the measured results with a good accuracy.The proposed method provides an instruction to predict the VDC in system modeling and analysis.     

Analytical investigation on thermal-induced warpage behavior of ultrathin chip-on-flex (UTCOF) assembly

The serious warpage issues of ultrathin chip-on-flex (UTCOF) assembly induced by mismatched thermal stresses have greatly affected the mechanical stability and reliability of emerging ultrathin chip packaging technology. Currently, a theoretical prediction as a convenient and straightforward approach is still lacked for describing effectively the thermal-mechanical behavior of UTCOF during the adhesive curing and cooling process. In consideration of the adhesive thickness approximating to ultrathin chip and flexible substrate thickness, we develop a layerwise-model of ultrathin chip-adhesive-flex structure under plain strain condition, where the behavior of thick adhesive bonding can be described precisely through increasing the subdivided mathematical plies. Further, the analytical results show that the concave and convex forms of ultrathin chip warpage yield at the end of the curing and cooling process respectively. Meanwhile, the effects of its structure dimensions and material properties are also revealed for discussing a way to relieve the extent of ultrathin chip warpage. Additionally, in order to verify the validity of the theoretical prediction, we also introduce the corresponding numerical technique and experimental method. These results suggest that a kind of rigid and ultrathin flexible substrate such as metal foil should be adopted for small warpage of ultrathin assembly.     

Differences in electrochemical corrosion behaviours between selective laser melted and wrought Ti6Al4V alloys in acid fluoride-containing artificial saliva

Journal of Applied Electrochemistry - In this work, the electrochemical corrosion behaviours of selective laser melted (SLMed) and wrought Ti6Al4V alloys in acid fluoride-containing artificial...     

Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding

Machining characteristics and surface integrity of advanced ceramics, including alumina, alumina–titania, and yttria partially stabilized tetragonal zirconia, were studied under high speed deep grinding conditions. Material removal mechanisms involved in the grinding processes were explored. The material removal in the grinding of alumina and alumina–titania was dominated by grain dislodgement or lateral cracking along grain boundaries. The removal for zirconia was via both local micro fracture and ductile cutting. It was found that under a feed rate of 500 mm/min and for all the wheel speeds used, an increase in the wheel depth of cut (DOC) from 0.1–2 mm slightly improved the ground surface finish, but greatly prolonged the wheel life. This increase did not deepen the subsurface damage layer for the alumina and alumina–titania, but resulted in a slightly deeper damage layer for the zirconia.     

20G高压锅炉管裂纹原因分析

对20G高压锅炉管产生裂纹的原因进行了分析，结果表明是冷拔工艺不当所致。     

如何提高模具质量

介绍了提高模具质量的基本途径，分析了模具的正确使用与维护对其寿命的影响。     

炼油厂酮苯装置空冷器腐蚀原因分析

炼厂酮苯装置空冷器因空冷管束腐蚀穿孔被迫停工检修，经取样分析和现场调查，得出结论：溶解氧含量偏高，设备本身存在震动，无盐水质量不稳定及空冷管束选材不当是造成空冷器管束腐蚀穿孔的主要原因，提出有效大的防腐措施。     

第62届世界铸造会议宣读论文综述(有色金属部分)

详细介绍了第 62届世界铸造会议中有关有色合金铸造的 6篇宣读论文。“铝合金压铸的压力传递与铸件质量的关系”一文提出一种新的测量铝合金压铸型腔中压力传递的方法 ,搞清了压力传递、流速与铸件质量之间的关系 ,获得了本届会议的优秀论文奖。“挤压压铸和半固态铸造生产高质量、复杂的铸件”一文展示了应用压铸高技术 ,生产出力学性能极高的汽车用复杂压铸件。“监控金属型、压铸模温度的智能系统”一文提出的智能控温系统 ,测温可靠 ,能自动控制铸型温度 ,铸型中不需开冷却水孔道。“制造金属基复合材料的复合铸造工艺 (Hybrid)”一文介绍了一种挤压铸造和熔模铸造相结合生产金属基复合材料的新工艺。“喷铸法制取铝基SiCp增强复合材料的微观组织和磨耗特性”一文指出用喷铸法制取的铝基SiCp增强复合材料 ,具有很高的耐磨性能。“不同凝固条件下 ,Na ,Ca含量对加Sb变质的 3 5 6合金力学性能的影响”一文的作者通过大量试验 ,搞清了Na ,Ca的有害作用 ,指出 3 5 6合金的σb 与δ之间存在下列关系 :σb(MPa) =2 5 .87lgδ( % ) 12 8.85。     

表面氧化层对TiMn1.25Cr0.25储氢合金活化性能的影响

通过TiMn1.25Cr0.25合金粉活化前在空气中暴露不同的时间,探讨了表面氧化层的形成对其活化性能的影响。活化测试结果表明：合金的活化难度随着合金在空气中暴露时间的延长而加大。俄歇电子能谱(AES)结果表明,在空气中暴露后的合金表面形成了一层大约6nm-10nm厚的表面氧化层,正是这层氧化层的形成加大了合金的活化难度。扫描电镜(SEM)结果表明合金的活化过程与合金的碎化有着密切的联系。