Trellis and convolutional precoding for transmitter-based interference presubtraction

This paper studies the combination of practical trellis and convolution codes with Tomlinson-Harashima precoding (THP) for the presubtraction of multiuser interference that is known at the transmitter but not known at the receiver. It is well known that a straightforward application of THP suffers power, modulo, and shaping losses. This paper proposes generalizations of THP that recover some of these losses. At a high signal-to-noise ratio (SNR), the precoding loss is dominated by the shaping loss, which is about 1.53 dB. To recover shaping loss, a trellis-shaping technique is developed that takes into account the knowledge of a noncausal interfering sequence, rather than just the instantaneous interference. At rates of 2 and 3 bits per transmission, trellis shaping is shown to be able to recover almost all of the 1.53-dB shaping loss. At a low SNR, the precoding loss is dominated by power and modulo losses, which can be as large as 3-4 dB. To recover these losses, a technique that incorporates partial interference presubtraction (PIP) within convolutional decoding is developed. At rates of 0.5 and 0.25 bits per transmission, PIP is able to recover 1-1.5 dB of the power loss. For intermediate SNR channels, a combination of the two schemes is shown to recover both power and shaping losses.     

N,N''-取代邻苯二胺的合成

通过2-取代苯并咪唑盐的还原开环反应制备了8个N,N′-不同取代的邻苯二胺,并经1HNMR、IR、MS及元素分析表征,其中5个未见文献报道.这是一条由邻苯二胺和羧酸经2.取代苯并咪唑制取该类化合物的简洁合成路线.     

一个用户接口管理系统

本文介绍了一个用户接口管理系统NUUIMS的设计和实现.重点叙述了该系统基于规范化目标用户接口模型的设计思想,系统组成及描述方法.文章也讨论了使用NUUIMS设计而成的用户接口的特点.     

基于ARIMA和支撑矢量机组合预测的惯性器件故障预报

文中提出一种基于ARIMA和支撑矢量机进行组合预测的方法,该方法综合运用ARIMA良好的线性拟合能力和支撑矢量机强大的非线性映射功能,将两种预测模型有机地组合在一起,综合各自优点,以期有效改善模型的拟合能力,获得最优预测效果.文中将该方法应用于某飞行器惯性器件的故障预报当中并进行了仿真实验.结果表明,这种方法相对于单项模型的预测具有更高的精度,对于复杂时间序列的分析和预测有很好的应用价值,在故障预报中具有广泛的应用前景.     

Preparation of flexible polyhedral particles via concentrated emulsion templating polymerization

This paper presents recent efforts on the preparation of flexible polyhedral particles via concentrated emulsion templating polymerization in which the hydrophilic monomer (acrylamide) and hydrophobic monomer (butyl acrylate) are polymerized simultaneously in the continuous and dispersed phase, respectively. Such templating polymerization has been enhanced in our systems owing to the introduction of acrylamide monomer and their higher polymerization rate in continuous phase as compared with butyl acrylate in dispersed phase. Diffusion between the different phases was also inhibited. Furthermore, the stability of the concentrated emulsion and the molecular weight of the produced poly(butyl acrylate) were found to be significantly affected by the amount of redox initiator. The morphology of the particles could be controlled by varying the volume fraction of the dispersed phase and the polyhedral particles were achieved at higher volume fraction. Copyright © 2005 Society of Chemical Industry     

中国铜冶炼企业的竞争趋势及对策建议

文章分析了我国大型及中小型铜冶炼企业所面临竞争环境,提出了我国铜冶炼企业应采取的对策建议,即:联合进口原料;走大型企业联合之路,组建中国铜业集团;开发利用海外资源;加大国内资源勘探;继续进行技改、挖潜,提高企业竞争力等。     

Preparation and photochromism of nanocomposite thin film based on polyoxometalate and polyethyleneglycol

A photochromic nanocomposite based on Keggin structure phosphomolybdic acid (PMoA) well dispersed in polyethyleneglycol (PEG) was fabricated. TEM image showed that PMoA nanoparticles with narrow size distribution were finely dispersed in polymer matrix. FT-IR results showed that the Keggin geometry of polyoxometalates was still preserved inside the composites and strong coulombic interaction was built between PMoA and polymer matrix. Under UV irradiation, the film was reduced photochemically to yield a blue species, which was in accordance with a charge-transfer mechanism.     

基于μCLinux的NAT设备的设计与开发

NAT(网络地址翻译)技术有效地解决了IP地址紧缺的问题,为实现IPv4到IPv6的平滑过渡发挥了巨大的作用.在一个体积小、重量轻、价格低廉的嵌入式平台上实现NAT设备具有很好的实际意义.文中介绍了NAT技术的原理和实现过程,在自行设计的ARM7嵌入式硬件平台上基于μCLinux操作系统实现了NAT的功能,并通过实现其他相关功能,构建了完整的NAT设备,完成了小型网络接入Internet的方案.     

电信大客户业务组网现状分析

前言随着电信市场竞争越来越激烈,各种电信业务资费呈下降趋势,因此大客户原来主要采用低速专线来组织其内部通信网的方式也发生变化,逐渐采用高速的2M电路或者LAN专线、VPN等IP电路进行组网。目前大客户主要分布在金融、政府、行政、外企、交通等行业,其采用运营商电路来组织其内部通信网络以满足中心网点与各个分支网点、分支机构的语音、数     

Tile-boundary artifact reduction using odd tile size and the low-pass first convention.

It is well known that tile-boundary artifacts occur in wavelet-based lossy image coding. However, until now, their cause has not been understood well. In this paper, we show that boundary artifacts are an inescapable consequence of the usual methods used to choose tile size and the type of symmetric extension employed in a wavelet-based image decomposition system. This paper presents a novel method for reducing these tile-boundary artifacts. The method employs odd tile sizes (2N + 1 samples) rather than the conventional even tile sizes (2N samples). It is shown that, for the same bit rate, an image compressed using an odd tile length low-pass first (OTLPF) convention has significantly less boundary artifacts than an image compressed using even tile sizes. The OTLPF convention can also be incorporated into the JPEG 2000 image compression algorithm using extensions defined in Part 2 of this standard.